|
Description |
Downloads |
Specs |
Ordering |
|
 |
K8600 |
|
- V-slot pulley design for reduced noise during operation
- Creality have sold of 800,000 Ender 3's worldwide!
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method with thumbscrews
- 220 x 220 x 250 build volume
- FDM Moulding technology
|
|
The Creality Ender 3 is one of the worlds best selling desktop 3D printers. Creality have developed the Ender 3 with a community of users and contributors to achieve the best possible print performance for its price. |
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
K9555 |
|
- Colour VGA output 480x432 pixels with 8 colours
- Stereo audio synthesiser
- Battery backed real-time clock
- Arduino compatible connector with an additional 20 independant I/O lines
- 2-channel audio/analog/PWM analog output
- Special commands for animated games
|
|
(SC September 2012) Fully upgraded Maximite design, see below for list of upgrades. Ideal for datalogging, monitoring & switching relays. Utilising the new Microchip PIC32 processor, this powerful embedded computer can read/save programs on an SD c |
 |
H8952 |
|
- Sleek minimal design
- NUC-like design (all connectors are brought around to one side).
- Excellent WiFi signals thanks to the plastic base
- Brilliant passive cooling (the whole top part of the case is a heatsink)
- Built-in fan with programmable speeds
- Power button with soft-shutdown
- Accessible GPIO with colour coded pinout
|
|
This Raspberry Pi 4 Argon ONE Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
K9670A |
|
- Utilises a half rack 1RU size case
- 16x2 alphanumeric display
- Rotary encoder control
- 4 push buttons
- Compatible with Arduino UNO/mega boards
- 5 2A 5V relay outputs
- 8 opto isolated inputs
- On board reset and LEDs
- All main board pins broken out to header sockets
|
|
Developed in house by Altronics, this new revised MegaBox is an upgrade of our original K 9670 - adding space for two shields, plus FIVE 2A 5V relay outputs and eight opto isolated outputs. All UNO/Mega pins are broken out to header sockets for easy connection to other breakouts. |
 |
K5887 |
|
|
|
(SC October '11) This new LED light slave controller kit will operate with the K 5885 master unit. Drive up to eight strings of LEDs, each string with completely individual control. Up to four slaves can be used per system - that's 32 channels of l |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
S9845A |
|
- 2 x 18650 replaceable batteries with solar panel recharging
- Includes wall mount bracket
- Two way audio (mic & speaker in-built)
- 3.6mm (90°) lens with digital zoom
- Day/night mode with IR LEDs
- 1080p recording
- Motion detect with push notifications to iOS/Android
- Micro SD card slot (up to 32GB)
- Compatible with 2.4GHz Wi-Fi
|
|
This 1080p wireless 2MP camera is ideal for use in situations where cabling for power and video are impractical. It provides superb clarity for both day and night use and can be configured to automatically record when motion is detected. Motion events can send push notifications to your phone. |
 |
K6027 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
This MPPT charge/Light controller will work with 12V or 24V solar panels to charge a 12V or 24V lead-acid or lithium iron phosphate battery. you can then use the battery to run 12V dc lighting. |
 |
K5255 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Up to 12 K5250 Intercom Sub-stations can be used from this one power supply. |
 |
K5886 |
|
|
|
(SC October '10) Brings your Christmas light show to life! Lights will flash, dim up & down in time with your favourite Christmas carols. Power up to 32 channels of lights from a master unit & 4 slaves. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
K5804 |
|
- LED voltage: 12-24V DC
- LED current: up to 10A total (ie, 120-240W maximum)
- Number of LED strings: up to 16 per unit
- LED control method: PWM, 200Hz, 255 brightness steps
- LED connectors: 2-pin or 4-pin male headers, 2.54mm pitch
- Audio input: 0.5-2.2V RMS nominal, 180kΩ 100pF input impedance
- Audio output: 1.1V RMS, THD+N 0.004%, signal-to-noise ratio 100dB
- Audio file support: 8-48kHz 16-bit mono or stereo WAV files
- Maximum directory depth: eight levels
- Maximum files per directory: 100
- Control method: universal infrared remote (optional)
- Dimensions: 140 x 110 x 35mm
- Supply voltage: 12-24V DC
- Current drain: ~110mA at 12V
|
|
(SC Oct/Nov '12) Accepts audio input signals and drives coloured LEDs "in tune" with the music. 16 output channels respond to different audio frequency bands and the light brightness is in proportion to the |
 |
X0218 |
|
|
|
This tiny torch employs 6 high brightness LEDs and is powered by simply plugging on to the end of a standard 9 Volt battery. |
 |
L2017C
|
|
- F-Type High Performance Balun
- Snap out reflectors
- Stainless Steel screws on connection points
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- 12mm extruded aluminium heavy duty elements
- Tough powder coated finish
- UV stabilised plastics
- Bifurcated rivets - Strongest in the industry
- U-bolts & Clamps fitted
|
|
Deluxe heavy duty VHF digital antenna manufactured with steel boom and extruded elements. |
 |
K6075 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Ideal for automotive fault-finding * Set for any current between 315mA and 10A. This resettable Electronic Fuse (eFuse) can be used temporarily in place of a conventional fuse when fault-finding. |
 |
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
 |
D2212 |
|
- Compact, Portable and Light Weight
- Flexible legs that can be curved randomly
- Suitable for Indoor and Outdoor Use
- Compatible with all iPhones, Samsungs and most Other Smartphones up to 3.5 inches wide.
- Compatible with all cameras with 1/4 screw interface and a max weight of 1.2kg
- Includes a GoPro adapter
- Bluetooth remote control
|
|
This uFO mini flexible tripod is a great idea for any photography enthusiast. It has been designed to be compact and portable. |
 |
SL4566A
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
K8640 |
|
- Build volume up to 130 x 82 x 160mm
- Fast layer speed with each layer taking between 1 and 4 seconds.
- UV integrated light source
- 1620 x 2560 resolution
- Precision up to 51μm
- LCD HD screen
- Z-Axis linear rail for better stability
- Air filtration system
- Manual levelling system
- 3.5 inch full colour touch screen
|
|
Resin based 3D printers are rapidly becoming the go to tool for high resolution 3D prints. They offer a faster print process with excellent accuracy and a stronger finished product thanks to UV curing on each layer. |
 |
K1096 |
|
- Easy to control 8-way joysticks
- Convertible Grippers
- Horizontal and vertical gripper joint
- Racing-car power switch with additional safety lock
- Openwork chassis design
- Visible mechanical rods and running gears
- Suitable for ages 10+
|
|
Looking for a unique robotic arm with exclusive features? This innovative arm will definitely surprise you. Unlock the safety switch and press on the red racing-car power button, the robotic arm directly enters stand-by mode and the rumbling of operation leads you the way to a mechanical gaming experience. |
 |
S5377 |
|
- Weather resistant design (IP54)
- Vandal resistant
- Compatible with 125KHz 64-bit EM cards & key fobs
- Built-in logics for stand alone, split-decoded and multi-station operations
- Controls “Going In” with user codes/cards
- “Going Out” with feature programmable egress button
- Door Bell for guests/service persons /tradesmen
- Stainless steel faceplate
|
|
This weatherproof vandal resistant door keypad controller is designed for controlling a door strike in home or business security installations. It combines a digital keypad and proximity EM card reader in one unit. |
 |
K9552 |
|
- Processor: PIC32MX795F512H-80I/PT (or PIC32MX695F512H-80I/PT)
- Clock speed: 80MHz
- RAM: 128K (internal)
- Software: MMBasic (similar to Microsoft BASIC)
- I/O pins: 20, individually configurable
- Video output: Monochrome standard VGA or composite video
- Audio: 500mV for amplifier, sound card, etc, or hi-z speaker
- Interfaces: USB 2.0 and IBM keyboard
- Power supply: 2.3-3.6V DC @ (125mA plus peripherals)
- Size & weight: 78 x 38 x 10mm; 15g
|
|
(SC November 2011) The idea behind the miniMaximite is simple: to shrink the Maximite down to the size of a large postage stamp while keeping it 100% compatible with the larger version in its external I/O capabilities and programming language. |
 |
S9846A |
|
- 1920 x 1080 (1080p) video resolution, motion detection, loop recording and 140° wide angle
- On board microphone
- Motion detect recording
- SD card slot for local recording up to 128GB
- On board Wi-Fi (2.4GHz only)
- USB rechargeable
- Auto IR Night Vision
- Magnetic Bracket
- Cloud Storage
|
|
Can be used for general surveillance around the home or business. |
