|
Description |
Downloads |
Specs |
Ordering |
|
 |
A1045 |
|
|
|
IR injector used to integrate Vcomm's RL-IR500 (flat target A1042) or RL-IR600 (tube target A1044) into Vcomm's RF IR Video Distribution System (Altronics part numbers, A1046, A1048 and A1050). Provides more visually pleasing, easily placeable target |
 |
A1116 |
|
|
|
This 2x25W RMS amplifier module with Bluetooth receiver sticks to your speaker magnet and connects to a pair of in-ceiling/in-wall speakers. Easy to install and works with Bluetooth enabled devices such as smartphones, tablets and laptops. Includes 15V power supply. |
 |
A2698A |
|
- DAB+ Digital Tuner / decoder.
- FM Radio Tuner.
- Bluetooth Player for pairing with handheld devices (phones, tablets etc).
- Station Presets (10 for DAB+, 10 for FM) from remote control.
- Remote control with Mute button and Bluetooth transport controls.
- DLS and RDS enabled.
- Autoscan tuning feature for both DAB+ and FM (Seek).
- Jog wheel for volume control and menu navigation and function execution.
|
|
Experience the crystal clear signal quality that digital radio can provide by using this compact hi-fi component style DAB+/FM tuner. It is an ideal replacement for your non-DAB+ analog hi-fi or home theatre receiver. |
 |
A31489 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. Includes transmitter and receiver. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
A4125 |
|
- HDMI over 2-conductor cable (Such as Twisted cable, telephone cable, Cat5e/6/7 cable etc)
- With 1x Loop HDMI output at transmitter
- Transmission more than 3800m
- Support Multi-level cascading
- HDMI Resolution up to 1080p
- HDCP compliant
- IR pass-through control
- Includes power supply
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
A4126 |
|
- Support Audio Format: LPCM audio format
- Transmission Distance: 3800m 2-Conductor cable (Recommend to use 12AWG-19AWG cable)
- Supported Video Format:
- DTV/HDTV:480i/ 480P/576i/576P/720P/1080i/1080P
- VESA: 800x600, 1024x768, 1280x768,1280x960,1280x1024, 1680x1050,1920x1080, 1280x720, 1360x768,1400x1050,1280x1024.
- Connector on Receiver:
- 1x Red Terminal Post, 1x Black Terminal Post
- 1x HDMI Output, 3.5mm
- 1x 3.5mm jack for IR-RX
- DC 5.5 x2.1mm Jack
- Power consumption: 5.5watts(Maximum)
- Dimension: 206Lx110Wx33Hmm
- IR frequency: 38K-56KHZ
- Weight: 548g
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C9038A NEW
|
|
- Superbly constructed with secure fit ear hooks for all day wearing.
- Compact charging case keeps your earphones charged up and ready to go.
- On ear design provides comfort without sacrificing audio quality.
- Great audio performance for a wide variety of listening activities.
- Bluetooth 5.3 chipset for better transmission reliability.
- Auto power on with automatic pairing.
- Suitable for use when exercising (sweat resistant design).
|
|
Hate in ear earphones? No worries! These new true wireless bluetooth 5.3 open ear (OWS) headphones are perfect for you - they’re sweat resistant, light weight and provide 8hrs of listening time. |
 |
D0507E NEW
|
|
- Dual USB QC3.0 type A charging outputs
- USB C Power Delivery (18W) output / charging input.
- LED capacity indicators
- Universal design for charging all USB devices.
- Stylish design
|
|
Offering both QuickCharge 3.0 charging and 18 Watt USB-C PD output, this 10,000mAh power bank will keep your devices charged up on the go. |
 |
D0511C NEW
|
|
- Dual USB QC3.0 type A charging outputs
- USB C Power Delivery (18W) output / charging input.
- LED capacity indicators
- Universal design for charging all USB devices.
- Stylish design
|
|
Offering both QuickCharge 3.0 charging and 18 Watt USB-C PD output, this 20,000mAh power bank will keep your devices charged up on the go. |
 |
D2212 |
|
- Compact, Portable and Light Weight
- Flexible legs that can be curved randomly
- Suitable for Indoor and Outdoor Use
- Compatible with all iPhones, Samsungs and most Other Smartphones up to 3.5 inches wide.
- Compatible with all cameras with 1/4 screw interface and a max weight of 1.2kg
- Includes a GoPro adapter
- Bluetooth remote control
|
|
This uFO mini flexible tripod is a great idea for any photography enthusiast. It has been designed to be compact and portable. |
 |
H8232A |
|
- Application: Desk mount
- Screen Size: 13"(330mm) - 27"(686mm)
- Weight Capacity: 6kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13"-27" weighing up to 6kg. Includes 2 USB ports. |
 |
H8950A ROHS
|
|
- Square form factor
- Compatible with Raspberry Pi B+, Pi-2, Pi-3
- Media server function with space for internal 2.5” HDD
- Multiple mount options including VESA
- Non-slip rubber feet
- LED guides for Power & Action on Pi B+ , Pi-2, Pi-3
- Internal space for addition of a HAT
- Internal space for hidden front facing Pi-Camera
- Removable panel for SD card access
- Secure/lockable Top Cover with 4 security screws
- Exceptional ventilation + space for onboard heat-sinks
- Top cover with easy clip system for PCB access if required
- Recessed pockets for access to all external connectors
|
|
A square case for your Raspberry Pi with internal 2.5&rdquo HDD bay and space for HATs & a camera. Ideal for desktop use, may also be VESA mounted. |
 |
H8951 |
|
|
|
An enclosed Raspberry Pi 4 case. Internal fan, vented lid and base ensures excellent cooling for your Pi. Provides access to all ports, except GPIO pins. |
 |
H8952 |
|
- Sleek minimal design
- NUC-like design (all connectors are brought around to one side).
- Excellent WiFi signals thanks to the plastic base
- Brilliant passive cooling (the whole top part of the case is a heatsink)
- Built-in fan with programmable speeds
- Power button with soft-shutdown
- Accessible GPIO with colour coded pinout
|
|
This Raspberry Pi 4 Argon ONE Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
K8600 |
|
- V-slot pulley design for reduced noise during operation
- Creality have sold of 800,000 Ender 3's worldwide!
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method with thumbscrews
- 220 x 220 x 250 build volume
- FDM Moulding technology
|
|
The Creality Ender 3 is one of the worlds best selling desktop 3D printers. Creality have developed the Ender 3 with a community of users and contributors to achieve the best possible print performance for its price. |
 |
K8640 |
|
- Build volume up to 130 x 82 x 160mm
- Fast layer speed with each layer taking between 1 and 4 seconds.
- UV integrated light source
- 1620 x 2560 resolution
- Precision up to 51μm
- LCD HD screen
- Z-Axis linear rail for better stability
- Air filtration system
- Manual levelling system
- 3.5 inch full colour touch screen
|
|
Resin based 3D printers are rapidly becoming the go to tool for high resolution 3D prints. They offer a faster print process with excellent accuracy and a stronger finished product thanks to UV curing on each layer. |
 |
L2017C
|
|
- F-Type High Performance Balun
- Snap out reflectors
- Stainless Steel screws on connection points
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- 12mm extruded aluminium heavy duty elements
- Tough powder coated finish
- UV stabilised plastics
- Bifurcated rivets - Strongest in the industry
- U-bolts & Clamps fitted
|
|
Deluxe heavy duty VHF digital antenna manufactured with steel boom and extruded elements. |
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
M8195C NEW
|
|
- Compact design with 24000mAh (88.8Wh) internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- 90W USB type C PD input and output
- Can be used as a USB power bank to keep devices charged on the go.
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
M8882B NEW
|
|
- 10 USB Type-C charging Ports
- Rapid charging with power output up to 3A
- Innovative design for space saving, allows up to 10 devices to stand when charging
- Solid and stable charging station
|
|
This 10-port USB charger allows you to charge up to 10 devices at once. It features 10 USB Type-C charging ports providing up to 200W of charge capacity across all ports. |
 |
P7427 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7428 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7429 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.