|
Description |
Downloads |
Specs |
Ordering |
|
 |
S9907D |
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
- Includes cameras, digital video recorder, connection leads & power supplies.
- Easily installs in just a few hours.
- Ideal for home or office.
- Suitable for DIY.
- Just add a hard drive and plug it in!
|
|
This package is a total home or small business solution as it contains 4 5MP bullet cameras and 4 5MP dome camera to suit a variety of needs and spaces. Cameras plus a surveillance DVR with 5MP recording and more. |
 |
D4360 |
|
- Compact, cost-effective and powerful industrial LTE router for professional applications
- Support LTE Cat 4 up to 150 Mbps
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Teltonika Remote Management System compatible
- Digital Input/Output for remote monitoring and control
- Compact size, easy integration
- Worldwide support
|
|
This router is ideal for people who would like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse.
|
 |
X2319B |
|
- IP65 weatherproof protection
- Ultra long life Epistar SMD5730 chipset
- Better energy efficiency compared to halogen lamps
- Die cast aluminium case with adjustable mounting bracket
- Safe to use for indoor or outdoor applications
|
|
This slim IP65 energy efficient LED flood light is ideal of outside your house so you can see when you arrive home late or even in the back garden while your entertaining to provide light. Also suitable for indoor use. The case is made with durable diecast aluminium and includes a mounting bracket. The specially made aluminium reflector improves li |
 |
S5377 |
|
- Weather resistant design (IP54)
- Vandal resistant
- Compatible with 125KHz 64-bit EM cards & key fobs
- Built-in logics for stand alone, split-decoded and multi-station operations
- Controls “Going In” with user codes/cards
- “Going Out” with feature programmable egress button
- Door Bell for guests/service persons /tradesmen
- Stainless steel faceplate
|
|
This weatherproof vandal resistant door keypad controller is designed for controlling a door strike in home or business security installations. It combines a digital keypad and proximity EM card reader in one unit. |
 |
H8232A |
|
- Application: Desk mount
- Screen Size: 13"(330mm) - 27"(686mm)
- Weight Capacity: 6kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13"-27" weighing up to 6kg. Includes 2 USB ports. |
 |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
 |
H0234 |
|
|
|
Made from clear see through plastic these parts cases are ideal for storing nuts, bolts, washers and components. 9 compartments. |
 |
K9805 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Utilises photoplethysmography sensing to detect blood flow and heart beating. This project is ideal for interfacing with Arduino projects requiring biometric monitoring. Published in DIYODE Magazine November 2017. |
 |
H8950A ROHS
|
|
- Square form factor
- Compatible with Raspberry Pi B+, Pi-2, Pi-3
- Media server function with space for internal 2.5” HDD
- Multiple mount options including VESA
- Non-slip rubber feet
- LED guides for Power & Action on Pi B+ , Pi-2, Pi-3
- Internal space for addition of a HAT
- Internal space for hidden front facing Pi-Camera
- Removable panel for SD card access
- Secure/lockable Top Cover with 4 security screws
- Exceptional ventilation + space for onboard heat-sinks
- Top cover with easy clip system for PCB access if required
- Recessed pockets for access to all external connectors
|
|
A square case for your Raspberry Pi with internal 2.5&rdquo HDD bay and space for HATs & a camera. Ideal for desktop use, may also be VESA mounted. |
 |
K9680 |
|
- This product is supplied in component form and requires soldering, drilling, and assembly. We recommend users are familiar with at least basic electronic principles and have the ability to solder.
|
|
(Designed by Altronics) These 210 x 110mm jumbo digits are made from PCB and can be daisychained together into an array of numbers for counter and clock projects. Each board is fitted with 74HC595 8 bit serial shift register chip and can be driven by Arduino ShiftOut. Aux output is provided for driving a decimal point/colon. Build yourself a sales |
 |
K9700 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
(Designed by Altronics) This 4 digit common anode driver board is ideal for building an Arduino controlled clock or counter. It features two on board 74HC595 chips which can be easily driven using Arduino ShiftOut. It utilises all through hole components for easy construction. |
 |
T5036A |
|
|
|
New lower price! Unique parts case features adjustable dividers on each side. Two sets of clips allow you to open one side at a time. 340x280x80mm |
 |
T1508 |
|
|
|
Effortlessly strips and slits power cable insulation. Cuts along and around PVC, rubber PE and other cable jackets. Suits cables 6-25mm OD. |
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
A4126 |
|
- Support Audio Format: LPCM audio format
- Transmission Distance: 3800m 2-Conductor cable (Recommend to use 12AWG-19AWG cable)
- Supported Video Format:
- DTV/HDTV:480i/ 480P/576i/576P/720P/1080i/1080P
- VESA: 800x600, 1024x768, 1280x768,1280x960,1280x1024, 1680x1050,1920x1080, 1280x720, 1360x768,1400x1050,1280x1024.
- Connector on Receiver:
- 1x Red Terminal Post, 1x Black Terminal Post
- 1x HDMI Output, 3.5mm
- 1x 3.5mm jack for IR-RX
- DC 5.5 x2.1mm Jack
- Power consumption: 5.5watts(Maximum)
- Dimension: 206Lx110Wx33Hmm
- IR frequency: 38K-56KHZ
- Weight: 548g
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
A4125 |
|
- HDMI over 2-conductor cable (Such as Twisted cable, telephone cable, Cat5e/6/7 cable etc)
- With 1x Loop HDMI output at transmitter
- Transmission more than 3800m
- Support Multi-level cascading
- HDMI Resolution up to 1080p
- HDCP compliant
- IR pass-through control
- Includes power supply
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
 |
X0435 |
|
- 5x magnification
- USB powered - use a spare PC port or a USB wall outlet charger
- Two brightness options
- In-line ON/OFF switch
- 430mm long with fully adjustable gooseneck
- 90mm 20 dioptre magnification lens
|
|
USB magnifying lamp provides 20 dioptres (5x) magnification with its 90mm lens. It's the perfect work lamp for the desk, electronics workbench or shed. |
 |
P8002 |
|
- Smooth control of dimmable LED loads, no configuration required
- Short circuit, thermal overload and over-current protection
- Two wire phase-control design
- Complies with Australian EMC standards
- User adjustable min/max brightness
- Soft start for increased lamp and driver life
- Suits standard Clipsal mech recesses
|
|
These dimmer mechanisms suit standard Clipsal mechanism wallplate recesses and offer LED compatible light dimming with soft start. |
 |
T2699A |
|
|
|
A compact handheld USB powered soldering iron for odd jobs and repairs when you need it. Surprisingly powerful! Great for quick solder joint repairs. |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
T2247A |
|
|
|
High quality metal calipers for precision measuring with ease. 150mm capability, suitable for measuring internal, external and depth dimensions. Fitted with easy to read LCD allowing measurements within 0.01mm or 0.0005". |
 |
K6075 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Ideal for automotive fault-finding * Set for any current between 315mA and 10A. This resettable Electronic Fuse (eFuse) can be used temporarily in place of a conventional fuse when fault-finding. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
T2163 |
|
- 1 x T2445 Soldering iron
- Desoldering pump
- 3 x Philips screwdrivers #0, #1 and #2
- 3 x Flat blade screwdrivers 3, 5 and 6mm
- 1 x Mini philips screwdriver 2.5mm
- 1 x Mini flat blade screwdriver 2.5mm
- Long nose pliers 5”
- Diagonal cutting pliers 4.5”
- IC Extractor
- Wire stripper & cutter
- Digital multimeter
- 8 Piece allen key set
- Solder
- 8 Way component storage box
- Tweezers (Long nose)
|
|
This 20 piece tool kit with handheld soldering iron contains all the essentials required for the field technician or the hobbyist who is just starting out. Will cover a wide variety of household and electronic jobs. All in a portable, durable padded zip-up carry case. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.