|
Description |
Downloads |
Specs |
Ordering |
|
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
S9445 |
|
- 4K Ultra Full HD video
- 30MP still shot capability
- Internal battery pack with solar recharging
- Adjustable triggering, intervals and duration.
- Loop recording
- Large aperture lens
- WiFi connectivity
- 30MP clear night and day imaging
- IP66 rated
- 18 month indoor standby time
- Bluetooth 5.0 with low power consumption
- Full automatic IR filter
- Built-in microphone & speaker
- Moon phase/temperature/time/date stamp functions
|
|
This 4k solar powered Wi-Fi trail camera is a wildlife and surveillance camera with a 3 zone infrared sensor. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
S9847 NEW
|
|
- 4MP 1440P quad HD recording
- 2.4GHz Wi-Fi
- 123° wide angle lens
- Secure cloud storage
- Motion detection up to 10m away
- Colour & IR night vision modes
- Micro SD card storage up to 128GB
- Two way audio intercom
- Cloud AI detection
- Indoor or outdoor use
- Rechargeable li-ion battery (via USB or solar panel)
- IP65 rated
- Siren & flashing light
- 3 activity zones
- Simply DIY install - no cabling!
|
|
A 4MP security camera that requires no wiring at all due to its internal battery and external solar panel (which can be remote mounted up to 4m away in a sunny spot). |
 |
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
K8600 |
|
- V-slot pulley design for reduced noise during operation
- Creality have sold of 800,000 Ender 3's worldwide!
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method with thumbscrews
- 220 x 220 x 250 build volume
- FDM Moulding technology
|
|
The Creality Ender 3 is one of the worlds best selling desktop 3D printers. Creality have developed the Ender 3 with a community of users and contributors to achieve the best possible print performance for its price. |
 |
D4360 |
|
- Compact, cost-effective and powerful industrial LTE router for professional applications
- Support LTE Cat 4 up to 150 Mbps
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Teltonika Remote Management System compatible
- Digital Input/Output for remote monitoring and control
- Compact size, easy integration
- Worldwide support
|
|
This router is ideal for people who would like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse.
|
 |
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
 |
A2698A |
|
- DAB+ Digital Tuner / decoder.
- FM Radio Tuner.
- Bluetooth Player for pairing with handheld devices (phones, tablets etc).
- Station Presets (10 for DAB+, 10 for FM) from remote control.
- Remote control with Mute button and Bluetooth transport controls.
- DLS and RDS enabled.
- Autoscan tuning feature for both DAB+ and FM (Seek).
- Jog wheel for volume control and menu navigation and function execution.
|
|
Experience the crystal clear signal quality that digital radio can provide by using this compact hi-fi component style DAB+/FM tuner. It is an ideal replacement for your non-DAB+ analog hi-fi or home theatre receiver. |
 |
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
SL4566B |
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
A5332 |
|
- Input impedance: 20KΩ (bal.)
- Maximum input level: ≥16dB
- Connections: Balanced XLR, 6.35mm jack
- Output impedance: 100Ω
- Maximum output level: ≥15dB
- Equaliser control 31 band (1/3 octave)
- High pass filter: 40Hz 12dB/octave
- Feedback threshold LED: ≥-22dB
- Peak sensitivity: Lit 3dB before clip point
- Frequency response: 20Hz - 20KHz (±0.5dB)
- THD + S/N %: <0.1% (20Hz - 20KHz @ 0dB)
- S/N ratio: ≥90dB
- Power supply: 240VAC
- Dimensions: ≈482W x 230D x 132Hmm
- Weight: 5.4kg
|
|
This professional unit delivers outstanding equalisation both in live or studio applications. Invaluable
for counteracting poor room or venue acoustics. The design employs ultra low noise audio amplifiers
with high quality components for outstanding sou |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
A31489 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. Includes transmitter and receiver. |
 |
S9349K |
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 8MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 16CH HD or 32CH IP Camera Input
- Support 2 SATA up to 16TB Capacity
|
|
This 16 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). Each channel can be individually recorded in real time 25fps @ 1080p to the internal SATA hard drive (available separately). Or 8fps @ 8MP (2592×1944px) resolution on all 16 channels. |
 |
K8640 |
|
- Build volume up to 130 x 82 x 160mm
- Fast layer speed with each layer taking between 1 and 4 seconds.
- UV integrated light source
- 1620 x 2560 resolution
- Precision up to 51μm
- LCD HD screen
- Z-Axis linear rail for better stability
- Air filtration system
- Manual levelling system
- 3.5 inch full colour touch screen
|
|
Resin based 3D printers are rapidly becoming the go to tool for high resolution 3D prints. They offer a faster print process with excellent accuracy and a stronger finished product thanks to UV curing on each layer. |
 |
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
 |
S9369 |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 25 channels up to 5MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 16 x 15.4W PoE network interfaces
- Four internal SATA interface, max 32TB
- Remote control & mouse
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.4 support
|
|
This multi channel network video recorder offers 5MP resolution recording at 25fps for up to 25 cameras (or 12ch of 4K @ 25fps). For ease of installation, 16 dedicated PoE ports are in-built. It utilises H.264/H.265+ compression to maximise your hard disk space and has wide camera compatibility with ONVIF 2.4 support. |
 |
S5276A |
|
- 8 alarm zones
- Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
- 56 user codes can be programmed to operate by keypad PIN, radio key or access card.
- Optional Ness Radio Interface for fully integrated wireless security.
- Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
- Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
- 3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
- Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter.
- Home Mode allows partial arming, (eg, perimeter security overnight).
- Day Mode feature allows daytime monitoring of fire doors, coolrooms etc.
- Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
- Keypad Panic and Duress feature.
- Two button arming feature.
- Fire Alarm feature with different siren tones.
- Highly flexible zone to output mapping.
- Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Nessensor™ vibration sensors.
- Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
- Siren chirp and strobe flash on arming with radio key.
- Quiet chirps option on arm/disarm by radio key.
- True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
- 4 programmable auxiliary outputs (Up to 8 Aux outputs optional).
- Optional output expander.
- Enhanced serial data input/output via RS232.
- Automatic reset fuses.
- Programmable Reset Output lockout.
- 30 event memory from KPX and Saturn keypads. 80 event memory can be accessed using Navigator keypad or NessComms™.
- Standard defaults to suit most applications.
- Easy programming by keypad or NessComms™ software by direct connect.
- All programming data is permanently stored in a non-volatile memory.
- All inputs and outputs are heavily protected against lightning and high voltage supply transients.
- High efficiency DC power supply with dual 17VAC/20VDC power input
|
|
This 8 Zone Alarm Panel features flexible 8 Zone control panel & 4G Cellular communicator. Supplied with 4G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.
|
 |
SL4576B
|
|
|
|
This 12.8V 100Ah lithium battery (LiFePO4) is compatible in size with traditional 90-100Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
S9907D |
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
- Includes cameras, digital video recorder, connection leads & power supplies.
- Easily installs in just a few hours.
- Ideal for home or office.
- Suitable for DIY.
- Just add a hard drive and plug it in!
|
|
This package is a total home or small business solution as it contains 4 5MP bullet cameras and 4 5MP dome camera to suit a variety of needs and spaces. Cameras plus a surveillance DVR with 5MP recording and more. |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.