|
Description |
Downloads |
Specs |
Ordering |
|
![P7942 Yellow RCA to Flylead Clipsal Clip-In Mechanism](https://images.altronics.com.au/thb/p/P7942.jpg) |
P7942 |
|
|
|
Flylead design for connection with pre-made leads. |
![P7987 Yellow RCA to RCA Clipsal Clip-In Mechanism](https://images.altronics.com.au/thb/p/P7987.jpg) |
P7987 |
|
|
|
Double sided pluggable design for connection with pre-made leads.
Clipsal Yellow |
![P8000 350VA Trailing Edge LED Rotary Dimmer Mechanism](https://images.altronics.com.au/thb/p/P8000.jpg) |
P8000 |
|
- Smooth control of dimmable LED loads, no configuration required
- Short circuit, thermal overload and over-current protection
- Two wire phase-control design
- Complies with Australian EMC standards
- Soft start for increased lamp and driver life
- Suits standard Clipsal mech recesses
|
|
These dimmer mechanisms suit standard Clipsal mechanism wallplate recesses and offer LED compatible light dimming with soft start. |
![P8002 350VA Trailing Edge LED Push Button Dimmer Mechanism](https://images.altronics.com.au/thb/p/P8002.jpg) |
P8002 |
|
- Smooth control of dimmable LED loads, no configuration required
- Short circuit, thermal overload and over-current protection
- Two wire phase-control design
- Complies with Australian EMC standards
- User adjustable min/max brightness
- Soft start for increased lamp and driver life
- Suits standard Clipsal mech recesses
|
|
These dimmer mechanisms suit standard Clipsal mechanism wallplate recesses and offer LED compatible light dimming with soft start. |
![P8174 Ultracharge RCD Protected 10A Powerblock](https://images.altronics.com.au/thb/p/P8174.jpg) |
P8174 |
|
- 5 x 10A individual power sockets and switches with covers
- Portable and worksite ready
- 2 x USB ports (2.1A total)
- IP54 Rating
- 1 x RCBO switch
- Flexible HD 1.8M Ext. Lead
- Max load: 2400W/10A
|
|
This Ultracharge RCD Protected 10A Powerblock is a must have for trades in the field or at home in the workshop - protects users from appliance faults just like your home RCD switch. |
![PB7509 30m Filtered DE15 High Density VGA Male-Male Cable](https://images.altronics.com.au/thb/p/P7502.jpg) |
PB7509 ROHS
|
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 30m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
![Q0207 12MHz Dual Channel PC Oscilloscope Signal Generator](https://images.altronics.com.au/thb/q/Q0207.jpg) |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
![Q0584 0-100A Ammeter Panel Mount Digital LED With Shunt](https://images.altronics.com.au/thb/q/Q0585.jpg) |
Q0584 |
|
- Current Range: 0-100A dc
- Max Input Current: ±15mA
- Power Supply: 8-24V dc
- Maximum Count: 999 (3 digit)
- Input Impedance: 1kΩ
- Sample Frequency: 400ms
- Dimensions:50W x 26H x 23.5Dmm
- Cutout Size: 48 x 23mm
|
|
For applications requiring a professional finish and digital accuracy. Includes shunt. |
![Q1089 Autoranging True RMS Digital Multimeter with NCV](https://images.altronics.com.au/thb/q/Q1089.jpg) |
Q1089 NEW
|
|
- True RMS Auto Range.
- Large easy to read reverse backlit screen.
- Simple push button operation.
- Large multifunction display.
- Indicates correct connection jacks.
|
|
This compact true RMS digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
![Q1133A Auto Ranging Digital Multimeter](https://images.altronics.com.au/thb/q/Q1133A.jpg) |
Q1133A |
|
- Manual override of auto-ranging
- Range hold & data hold
- Auto power off
- Temperature measurement sensor included)
- Continuity buzzer
- Diode tester
- Frequency 1Hz - 30MHz
- Battery included
- CMOS and TTL logic testing
- Cat II 1000V
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
![Q1340A Professional Cable Tracer & PoE LAN Cable Tester](https://images.altronics.com.au/thb/q/Q1340A.jpg) |
Q1340A |
|
- Transmitter
- Tone frequency: 130KHz
- Max. distance of transmission: 3km
- Max. distance of cable map: 300m
- Max. working current: ≦70mA
- Tone mode: Single tone
- Compatible connectors: For RJ45(8 pin)/RJ11(6 pin) cable map test. RJ45 SCAN socket : for RJ45 locating individual wire pairs RJ11 SCAN socket: for RJ11 locating individual wire pairs
- Cable types: RJ45 Lan cable Cat 5, 5e, 6(UTP/ STP), RJ11/12 telephone cable Cat 3 (6P/2C/4C/6C)
- Function selection: 5 Press button switch (POWER、SCAN/PoE. SCAN,TEST/FAST TEST、Ω,POL/TEL)
- Continuity test: 1 LED (≦300Ω), Coaxial cable & normal solid/Stranded wire by alligator clips patch cord.
- Max. signal voltage: 8Vp-p
- Cable map indication: 8 LEDs, Fast/Slow dual speed
- Shielded indication: 1 LED
- Telephone line polarity, status indication: 1 Dual color LED
- Live telecommunication equipment test and router test: Yes
- Voltage protection: DC 48V
- Auto power off: 1 hour
- Low battery display: 6.5V (Power LED flashes)
- Battery type DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pce)
- Dimension: 138L×80W×35D mm
- Weight: 140g
- Receiver
- Frequency: 130KHz
- The Max. working current: ≦115mA
- Compatible connectors: RJ45(8 pin)/RJ11(6 pin)
- Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
- Earphone jack: 1
- Signal status indication: 1 dual colour LED & Buzzer
- Cable map indication: 8 LEDs
- Shielded indication: 1 LED
- NCV indication; 1 LED (AC90~1000V,≥50mm,≤100mm)
- LED illumination: 1 LED
- Power indication: 1 LED
- Battery type: DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pcs)
- Dimension: 203L×50W×32D mm
- Weight: 95g
- Accessories: RJ45 cable patch cords, RJ11 cable patch cords, RJ11 to alligator clips patch cord,
- earphone, storage bag, user manual
|
|
This Noise-Filtering Network PoE Toner & Probe
allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
![Q2120 Digital Battery Analyser](https://images.altronics.com.au/thb/q/Q2120.jpg) |
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
![S1160A 200V 1.0A Horizontal Float Switch](https://images.altronics.com.au/thb/s/S1160A.jpg) |
S1160A |
|
- Switch type: SPST
- Switching current: 1A DC
- Contact rating 1.5A @ 200VDC (Max)
- Contact resistance: 90mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -55 to 70 degrees C
|
|
New model with increased current handling. Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. Includes a waterp |
![S1700 DPST Mom. Red Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1700.jpg) |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
![S1702 DPST Mom. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1702.jpg) |
S1702 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1704 DPST Mom. Orange Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1714.jpg) |
S1704 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1706 DPST Mom. White Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1706.jpg) |
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1722 DPST Alt. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1702.jpg) |
S1722 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1724 DPST Alt. Orange Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1714.jpg) |
S1724 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1726 DPST Alt. White Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1706.jpg) |
S1726 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1730 4PST Alt. Red Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1730.jpg) |
S1730 ROHS
|
|
- Colour: Red
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the colour |
![S1732 4PST Alt. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1732.jpg) |
S1732 ROHS
|
|
- Colour: Green
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1734 4PST Alt. Orange Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1704.jpg) |
S1734 ROHS
|
|
- Colour: Orange
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1736 4PST Alt. White Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1736.jpg) |
S1736 ROHS
|
|
- Colour: White
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. |
![S2682 Dual Battery Isolator Kit](https://images.altronics.com.au/thb/s/S2682.jpg) |
S2682 |
|
- Emergency override feature
- LED status indicator
- Suitable for 12VDC Marine, 4WD, caravan and solar applications
|
|
This dual battery isolator kit allows you to charge two batteries at the same time from your engine alternator. The isolator kit will begin charging the second battery simultaneously when the start battery is sufficiently charged whilst engine is on.
|