|
Description |
Downloads |
Specs |
Ordering |
|
 |
X7063 |
|
- Perpetual Calendar up to Year 2099
- Automatic calibration of network time service
- Day of week available to be selected in 8 languages
- Able to be used as an alarm with two daily alarms optional
- Automatic snooze function (OFF or 5~60min)
- Records temperature, humidity, wind speed and rainfall
- Display of ‘feels like temperature’, wind chill temperature, heat index, dew point temperature
- Future weather forecast and forecast temperature function
- Connects directly to Wi-Fi network (2.4Ghz only).
- Adjustable backlight (3 Levels) - when station is plugged in through USB output
|
|
This fantastic wireless Wi-Fi home weather station contains everything you require to monitor live weather conditions at home. The main base station displays at a glance, indoor and outdoor temperature, humidity, barometric pressure, recent rainfall, wind speed and direction. |
 |
Q1341 |
|
- Headphone socket (earphones included)
- Adjustable buzzer volume
- Tests network and phone circuit voltage
- LED light on probe
- Single or dual tone
- Verifies short, open or crossed pairs in UTP cables
- Confirms integrity of patch leads and field wiring
- Includes RJ45 lead & croc clip test lead
|
|
Combines the functionality of a cable tracer and network cable tester in one convenient unit. The main unit can be connected to an unidentified pair which injects an audible signal down the line. |
 |
Q1129 |
|
- Easy auto ranging design
- Data hold function
- Jumbo LCD with white backlight
- Continuity buzzer
- Diode test
- 10A DC current range
- Includes 2xAAA batteries
- Fuses are replaceable (10A 250V, 400mA 250V SFE-6)
- Frequency and duty cycle
- Cat II 1000V / Cat III 600V
|
|
This affordable 4000 count digital multimeter with 12 test modes is the perfect accessory for the enthusiast or student. Auto ranging makes testing easier, whilst the large LCD screen with white backlighting makes it easy to read from a distance. |
 |
X6015 |
|
- Works with most vehicles newer than 2005
- iOS, Android & Windows compatible
- Compatible with a wide selection of apps
- Displays engine dashboard parameters, error codes and real time data
- Plug and play operation
|
|
If your vehicle is fitted with an OBDII port, this dongle can be plugged in and connected via Bluetooth to a smartphone to provide a wealth of diagnostic information. |
 |
Q0102 |
|
- 2 channel digital oscilloscope + digital multimeter
- Easy to use button and screen layout
- Small enough for single hand operation
- Large, clear 2.8” 64K colour screen 320x240 resolution
- Oscilloscope: 250MSa/s Sample Rate, 40MHz Bandwidth
- USB C recharging with internal 2600mAh lithium battery
- Automatic frequency & amplitude measurement
- 4000 count 10A multimeter
|
|
The ultimate field testing accessory combining an digital storage oscilloscope and digital multimeter. It features 2 channels with real time sampling modes of 125MSa/s per channel (or 250MSa/s when used in single channel mode). 64K colour screen provides a clear view. |
 |
Q0968 |
|
- Two current ranges 4A, 80A
- 1mA resolution
- Backlit LCD
- One touch zero function
- 23mm jaw opening
- Auto power off
- Data hold function
- Test leads and carry case included
- 2x AAA battery included
- Cat III 600V
|
|
This compact clamp meter provides high resolution current readings up to 80A ac or dc. |
 |
Q1135 |
|
- Large easy read 19999 count screen
- Auto ranging
- True RMS measurement
- Data hold, min/max and relative modes
- Continuity buzzer
- Diode test
- Non contact AC voltage detection
- 2x AA battery included
|
|
This professional digital multimeter offers extended resolution to 4 digits! |
 |
Q1073A |
|
- True RMS AC measurement
- 6000 count reverse backlit LCD
- Autoranging
- Frequency counter to 10MHz
- Capacitance measurement
- Fused 10A input
- Temperature mode (°C/°F)
- Test socket LED lights
- Continuity and diode test
- Internal rechargeable lithium battery
- Range hold & relative mode
- Data hold
- Wireless USB charging adaptor
- Cat III 1000V/Cat IV 600V
|
|
With wireless charging adaptor - no batteries required! Plus, input jack LED indicators to remind users to plug leads into the correct jacks. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
Q0965A |
|
- 800A AC/DC range
- 10mA resolution
- Backlit LCD
- 28mm clamp opening
- Auto power off
- 6000 count LCD readout
- Data hold and relative functions
- Test leads, temperature probe and carry case included
- 2 x AAA battery included
- Cat II 600V, Cat III 300V
|
|
A clamp meter offering the flexibility of measuring AC and DC currents up to 800A. Simply clamp the jaws around the conductor and the display reads the DC or AC current present. It can test DC Volts, AC Volts, DC Amps, AC Amps, resistance, capacitance, frequency, temperature, temperature and continuity. |
 |
Q1053B |
|
- Low battery indicator
- Jumbo display
- Continuity buzzer
- Square wave output
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- Battery included
- Cat II 500V
|
|
This compact, affordable digital multimeter features 19 ranges, square wave output, continuity buzzer, in-built hFE transistor and diode test function. |
 |
Q1242A |
|
- 200MΩ and 2000MΩ ranges
- Backlit LCD readout
- “Push to test” activation
- Auto power off
- Rubber holster
- Data hold
- High quality PVC leads
- Alligator clip lead adaptors
- Battery included
- Cat II 600V
|
|
Digital insulation testers measure the electrical insulation strength between two conductors by applying a high voltage across them and measuring any current that flows. This is to test for "leakage" paths and insulation breakdown in electrical circuits. |
 |
Q1283A |
|
- IR temperature range: -50 to 580°C
- IR resolution: 0.1 deg up to 580°C
- Emissivity: Adjustable 0.1-1.0
- Basic accuracy: ±2% of reading
- Distance-to-spot ratio (optical resolution): 13:1
- Spectral response: 8-14μm
- Dimensions: 155H x 98W x 27Dmm
|
|
This handheld IR thermometer offers laser pointer guide and excellent accuracy between -50°C and 580°C. |
 |
D3006A |
|
- Small size, easy to carry.
- Multi-function, simple operation
- LED status display
- Verifies RJ45, RJ11, RJ12 cables
- Checks wire map for continuity, open, short and cross
- Port flash function for locating cables by flashing on a Switch
- Three testing modes to adjust the testing speed: automatically fast scan, automatically slow scan and manual test
|
|
Next time you need to check your cables to ensure you will never again have a faulty cable on your network. Instantly displays the status of all cable conductors (shorted pins, straight or crossover cable identification). Makes it easy to troubleshoot connections. Suits most common network configurations.
|
 |
Q2105 |
|
- Measure ESR (even in-circuit).
- Measure capacitance (from 0.3μF to 90,000μF).
- Automatically starts analysis when the ESR70 is connected.
- Audible alerts with different tones for various ESR levels.
- ESR resolution down to 0.01Ω.
- Polarity free due to bi-directional low voltage (500mV) test span.
- Low DC resistance checking measurement (even in-circuit).
- Supplied complete with 2mm male test leads and 2mm compatible gold plated crocs.
- Test leads are ultra-durable and 45cm (18") long with 2mm plugs.
- Enhanced software compensation of cable resistance.
- Enhanced compensation for leakage or parallel resistance.
- Improved LCD with better backlight.
- 10x faster capacitance measurement for large capacitors.
- Enhanced user options system.
- New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements.
- Much wider capacitance measurement range now 0.3μF to 90,000μF (was 1μF to 22,000μF).
|
|
Measuring a capacitor's ESR (equivalent series resistance) is a great indicator of capacitor condition. The Atlas ESR offers instant results. Just connect the probes and press test - no need to worry about polarity! You can even use the Atlas ESR in circu |
 |
Q1070A |
|
- True RMS AC measurement
- 6000 count 3.75 digit LCD
- Non contact AC voltage detection
- Temperature measurement.
- Frequency counter to 60MHz
- Capacitance measurement
- Fused 10A input
- Continuity and diode test
- Auto power off
- Low battery indicator
- 2x AAA battery included
- Data hold mode
- Display backlight
- In built torch
- Cat III 600V
|
|
An affordable true RMS digital multimeter, with in built torch for the enthusiast or instrument technician. |
 |
Q1134A |
|
- New type holster, streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti‐ interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- True RMS, non‐ contact voltage detect (NCV) and data hold function
- Lighting function, backlight display.
|
|
An affordable, versatile multimeter designed for the electronics enthusiast or handyman. |
 |
D3011 |
|
|
|
Allows you to test the conditions of 802.3af/at standard and non-standard PoE cabling and ports on PoE equipment. Tests for power supply voltage, polarity and crossover mode, plus displays power consumption of connected DC devices such as cameras or other PoE enabled IoT products.
|
 |
D3020 |
|
- Auto-ranging multimeter
- Will test 10Base-T, 10Base-2, RJ45/11, 258A, TIA 568A/568B and Token Ring
- Includes RJ & BNC network lead adaptors
- Auto power off
- Supplied with test probe leads & carry case
- Battery included
- Cat II 1000V & Cat III 600V
|
|
This is the perfect "all-in-one" solution for network installers and IT technicians. |
 |
Q1346 |
|
- POE test
- PING test
- Perform crosstalk test on network cable
- Test open, short or cross connection
- Measure length of telephone, network cabling up to 2000m
- Log data and measurements to internal Micro SD card
- Locate breakages
- Voltage detector in receiver end (50-1000V)
- Includes 8 remote units
- Voltage presence detection
- Includes carry case, charging lead and adaptors.
|
|
This comprehensive cable testing kit consists of three units. The main tester with 2.8" LCD screen, cable "sniffer" receiving unit and 8 remote identifiers. It is capable of measuring cable length, tracing cable location, continuity testing, PoE and Ping testing. It can be used with LAN, telephone cabling. |
 |
Q0203B NEW
|
|
- 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronising Signal + External Trigger
- Easy to use button layout
- Large and clear 7” true colour 24-bit display
- Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth
- Huge selection of auto measurement functions
- Powerful trigger functions: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC
- Integrated USB host, support USB disk storage, USB interface system update
|
|
Perfect for those in R&D, product development or service of complex electronic equipment. This compact bench top oscilloscope features 2 channels with real-time sampling modes of 1GSa/s (25GS/s equivalent sampling rate). |
 |
Q1344 |
|
- Cable length measurement, accurate to ±3%
- Short circuit, open, split pair detection
- UTP cable conductor verification
- Includes USB charging lead
- Internal lithium ion battery in main unit
- Bright display backlighting
- Auto power off
- Confirms integrity of patch leads and field wiring
- Suits RJ11 and RJ45 cabling
- Adjustable buzzer volume
|
|
This compact handheld cable verifier features a USB rechargeable lithiumion battery for easy recharge on the go. It verifies the length and integrity of coaxial and UTP data/telephone cabling. It's wiremap system detects short circuits, split pairs and cable length up to 350m. |
 |
Q2100 |
|
- Connect any way round.
- Automatic component type identification.
- Automatic pinout identification.
- Transistor gain measurement.
- MOSFET gate threshold measurement.
- PN junction characteristics measurements.
- Leakage current measurement.
- Auto power on and power off.
- Ultra-slim and compact design.
|
|
An amazingly versatile piece of test equipment that could save you hours in looking up transistor, diode and FET specifications!
Once you've used the Atlas Component Analyser, you'll wonder how you ever did without it. |
 |
Q1127 |
|
- Temperature Range: -20 to 1320°C
- Tolerance: ±3%
- 700mm lead
|
|
Suitable for multimeters with a temperature range. |
 |
Q1067 |
|
- On-screen test lead connection prompts
- Capacitance measurement
- Frequency counter
- Temperature measurement
- Continuity checker
- Resistance to 20M ohm
- Diode check
- Continuity buzzer
- Transistor checker
- Auto power off after 30 minutes
- Massive 20A DC current range
- Rubber holster included
- Battery included
|
|
This digital multimeter features an extra large display making it very easy to read. It has a multitude of useful features including transistor tester, capacitor, frequency and temperature ranges. |
