|
Description |
Downloads |
Specs |
Ordering |
|
 |
D4231 |
|
- Supports auto-MDI/MDIX
- Supports TCP/IP server, TCP/IP Client & UDP
- Baud rate 300bps-230400bps
- Supports Modbus RTU
- Reload function
- RS485 support full duplex and half duplex
- Supports VSPE software.
|
|
This serial to ethernet converter allows you to easily send serial RS232/422/485/Modbus over ethernet for controlling equipment over longer distances than traditional serial cables. This device can be controlled and set up remotely using a handy web based interface. |
 |
D5106A ROHS
|
|
|
|
Cat6A approved network cable joiner. Straight through, pin to pin. |
 |
D4185 |
|
- Complies with IEEE802.3, IEEE802.3u standards
- 8 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
- Supports IEEE802.3x flow control for Full Duplex mode and backpressure for half-duplex mode
- Supports MAC address auto-learning and auto-aging
- LED indicators for monitoring power, link, activity
- Plastic case, desktop or wall-mounting design
- External Power Adapter supply
|
|
TL-SF1008D 8-port 10/100Mbps Fast Ethernet Switch provides 8 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. The Switch is Plug-and-Play and each port can be used |
 |
D5134A |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
 |
D4412 |
|
- Improves 3G and 4G coverage (5G future compatible)
- Simple management through WAVE mobile application
- 700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)
- 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
- Carrier Switching using WAVE App between Telstra, Optus or Vodafone
- Up to 3000 m2 coverage area
- Two band simultaneous relay
- Support for Dynamic Spectrum Sharing (DSS)
- Total System Relay Bandwidth – Up to 40 MHz
- Remote Monitoring, Control and Alert Capabilities via WAVE Portal
- Ethernet Port for connection to internet source for live monitoring
|
|
Cel-Fi Go G41 represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, the G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models. |
 |
D4228 |
|
- 2 Gigabit ports ensure faster transmission
- Complies with IEEE802.3af/at standards, supplies up to 30 W
- Reduces infrastructure costs by transmitting data and power simultaneously via an Ethernet cable
- Automatically determines and supplies the exact power to meet the device's need
- Wall-mounting and desktop design accommodates most installation scenarios
- Plug & Play installation requires no configuration
- Integrated power supply
|
|
Expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. |
 |
D4212 |
|
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 53W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 8K entry MAC address table of the TL-SG1008P with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power supply adapter
|
|
8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch |
 |
D4230 |
|
- *TP-LINKs TL-POE10R uses widely adopted PoE technology in the industry and provides more cost-effective PoE solution. It is highly recommended not to pair the PoE products with other PoE adapters unless under professional guidance.
|
|
The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter. |
 |
D4232 |
|
- Range Extender mode boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly
- Miniature size and wall-mounted design make it easy to deploy and move flexibly
- Easily expand wireless coverage at a push of Range Extender button
- Smart Signal Indicator Light help to find the right location to place the range extender
- Ethernet port allows the Extender to function as a wireless adapter to connect wired devices
- 300Mbps wireless data rates ideal for video streaming, online gaming and internet calling
- Supports domain name-based login (https://tplinkextender.net) for advanced management
- Compatible with other 802.11n/g/b wireless devices
- Advanced 64/128/152-bit WEP, WPA-PSK / WPA2-PSK encryptions protect your network from security threats
|
|
The D 4232 is designed to conveniently expand the coverage and improve the signal strength of an existing wireless network to eliminate "dead zones". |
 |
D4229 |
|
- *TP-LINKs TL-POE150S uses widely adopted PoE technology in the industry and provides more cost-effective PoE solution. It is highly recommended not to pair the PoE products with other PoE adapters unless under professional guidance.
|
|
The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters or other equivalent products, to extend your network to where there are no power line or |
 |
S9266 |
|
|
|
Allows you to power non PoE equipped devices
from a 802.3af Power Over Ethernet RJ45 cable.
Eliminates the need for a power supply at the
camera end of the cable run. 12V, 15.4W max. |
 |
D4213A |
|
- 8 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ ports to power 8 PoE devices at the same time
- Works with IEEE 802.3af or 802.3at compliant up to 30W per port device
- Innovative energy-efficient technology reduces power consumption
- Rack mountable with included rack mount bracket
- Total PoE power budget up to 126W
- Plug and play design, no configuration required
|
|
8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
|
 |
D4196 |
|
- All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps
- Supports Auto-MDI/MDIX function
- Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode
- Store and forward Switching scheme
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch allows multiple computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. Rack mountable. |
 |
D4191 |
|
- Adopts Green Ethernet technology, saving power and cost
- Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode
- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
- Supports MAC address auto-learning and auto-aging
- Plastic case, desktop or wall-mounting design
- External power adapter supply
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 5 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. |
 |
D5113A |
|
|
|
Keystone wallplates, ideal for telephone and computer use. Wall plates include connectors.
Size: 70W x 115H. |
 |
D4249 |
|
- Superior Range – High power amplifiers and high-gain antennas provide enhanced wireless range up to 10,000 sq ft.
- Wall-Penetrating Wi-Fi – Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones
- 3 Modes Functionality – Offers three wireless modes, including Router, Range Extender, and Access Point
- 450Mbps Wireless Speed – Ideal for video streaming, online gaming and VoIP
|
|
Superior Range &ndash High power amplifiers and high-gain antennas provide enhanced wireless range up to 10,000 sq ft.
Wall-Penetrating Wi-Fi - Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones
3 Modes Functionality - Offers three wireless modes, including Router, Range Extender, and Access Point
450Mbps Wi |
 |
D4405 |
|
- Designed for mobile transport applications
- 70dB of system gain
- Each pack includes internal and external antennas
- Telstra network locked
- Carrier approved
- Band selection button
- Supports Telstra, Aldi Mobile, Boost Mobile and Woolworths Connect networks
- 12V DC powered
- SMA antenna connections
|
|
The ideal product to boost and distribute a 3G/4G mobile signal within your caravan. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. |
 |
D4206 |
|
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 110W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 8K entry MAC address table of the TL-SG1016PE with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
|
|
16-Port Gigabit Desktop Switch with 8-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
|
 |
D4299 |
|
- Boosts your wireless signal, eliminating previously inaccessible areas or “dead zones”
- Supports all 802.11 a/b/g/n/ac standards of Wi-Fi routers and wireless access points
- Wireless AC technology delivers combined dual band speeds of up to 750Mbps
- Gigabit Ethernet port allows the extender to connect to wired devices as a wireless bridge
- Its compact, wall-mounted design allows for easy, flexible deployment
|
|
This wifi extender is designed to conveniently expand the coverage and improve the signal strength of an existing wireless network to eliminate 'dead zones'. With 750Mbps wireless N speeds, 'Range Extender' button, tiny size and wall mounting design, extending a wireless network has never been simpler. |
 |
S9747 |
|
- Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralised Cloud Management, and Intelligent Monitoring.
- Centralised Management: Cloud access and Omada app for ultra convenience and easy management.
- Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.
- PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter included) for flexible installations.
- Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
- Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies.
|
|
As a long range indoor wireless device, the EAP225 is designed to provide a multiple connection and long distance wireless networking solution. It operates seamlessly in the 2.4GHz and 5GHz frequency spectra and provides wireless data transfer rates of up to 1200Mb |
 |
D5137A |
|
- Electrical Specifications
- Voltage Rating: 125V AC RMS
- Current Rating: 1.5A
- Contact Resistance: 100milliohms (max)
- Insulation Resistance: 1000megohms (min @ 500V DC)
- Dielectric Strength: 750V AC RMS @ 60Hz for 1 minute
- Environmental Specifications
- Storage Temperature: -40°C ~ +85°C
- Operating Temperature: 0°C ~ +70°C
- Mechanical Specifications
- Housing Material: PC
- Panel Frame: Carbon steel, black powder coated
- PCB Material: FR-4 T=1.6mm
- IDC Material: PC
- Contact: Phosphor bronze with nickel plating
- RJ45 Jack Life: 750 times (min)
- IDC Life: 200 times (min)
- Wire Gauge: 22-26AWG
|
|
This 1RU panel is fitted with 24 RJ45 "back to back" coupler ports for tool free cable termination. Port numbers fields can be written on and fitted securely behind a clear lexan. Black finish. Includes rear cable support bar with earthing strap. |
 |
S9740 |
|
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
|
|
TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. |
 |
D4422 |
|
- 3 dBi gain across lower bands 698 to 960 MHz
- 3 dBi gain across upper bands 1710 to 2700 MHz
- Mounting by 3M adhesive
- SMA Male connector
- Cable length 3 meters
|
|
The Blackhawk 4G & IoT adhesive mount antenna is a modest performing mobile antenna that covers most worldwide 4G cellular bands between 700 and 2700 MHz. |
 |
S9722A |
|
- Gain: +5 dB
- Connector: SMA Male
- Operating frequency: 2.4Ghz
- Impedance: 50Ω
- Dimensions (mm): 12.5 x 195
- Weight: 30g
|
|
5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection. |
 |
D5135 |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
 |
S9745 |
|
- EAP Controller Software enables administrators to easily manage hundreds of EAPs
- Support Passive PoE for convenient and affordable installation
- Simple mounting design to easily mount to a wall or ceiling
- 300Mbps wireless data rate for uninterrupted wireless connection
- Captive portal provides one convenient method of authentication for Wi-Fi guests
- Rate limit on per SSID to restrict the bandwidth of each client
- Access Control restricts or allows the client to access the specified network segment
- Reboot Schedule enables all the APs to be rebooted automatically within a specified time
- WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN
- Multi-SSID divides multiple wireless network for different users
- Load balance ensures large numbers of users have smooth network experiences in large business networks
- Compatible with 802.11 b/g/n products
- Multiple operating modes satisfy different application conditions including managed AP and standalone AP modes
- QoS function prioritizes data, voice, and video applications to ensure time-sensitive traffic takes priority over all other traffic
- Prevents dust from dropping onto the PCB through bypass louver, which ensures long-term, unhindered operation.
|
|
As a long range indoor wireless device, the EAP110 is designed to provide a multiple connection and long distance wireless networking solution. It operates seamlessly in the 2.4GHz frequency spectrum and provides wireless data transfer rates of up to 300Mb |
 |
D4215 |
|
- 384 W PoE Budget: 24× 802.3at/af-compliant PoE+ ports with a total power supply of 384 W*.
- Full Gigabit Ports: 24× gigabit PoE+ ports and 4× gigabit SFP Slots provide high-speed connections.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring.
- Centralised Management: Cloud access and Omada app for ultra convenience and easy management.
- Static Routing: Helps route internal traffic for more efficient use of network resources.
- Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.
- Optimise Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.
- Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities.
|
|
This JetStream 28-Port Gigabit managed switch has 24 ports supporting 802.3at/af-compliant PoE+. Designed to use a single Ethernet cable for both data and power transmission, it offers flexible deployment for PoE-supported devices such as wireless access points, IP cameras, and IP phones, lowering infrastructure costs for small businesses.
|
 |
D4425 |
|
|
|
A compact bullbar mount antenna with spring base providing up to 6dBi gain for your Cel-Fi 4G system. Overall length: 68cm. 4m SMA connection cable. |
 |
D5118A |
|
|
|
Supplied complete with connectors. Dual Cat 6a sockets are ACMA approved. |
 |
D4266 |
|
- Interface: 3 10/100Mbps LAN Ports, 1 10/100Mbps LAN/WAN Port, 1 SIM Card Slot
- Button: WPS/Reset Button, Wireless On/Off Button, Power On/Off Button
- External Power Supply: 9V/1A
- Dimensions ( W x D x H ): 202 x 141 x 33.6 mm
- Antenna Type: 2 Internal Wi-Fi Antennas, 2 Detachable External 4G LTE Antennas
- Compatibility: NBN - Fibre to the Premises (FTTP) - Wireless Router Mode. NBN - Fibre to the Home (FTTH) - Wireless Router Mode.
- Wireless Features
- Wireless Standards: IEEE 802.11b/g/n 2.4GHz
- Frequency: 2.4GHz
- Signal Rate: 300Mbps at 2.4GHz
- Reception Sensitivity: 11g 54M: -74dBm, 11n HT20: -71dBm, 11n HT40: -67dBm
- Transmit Power: CE: <20dBm(2.4GHz)
- Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
- Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions
- Network Type (V2):
- T4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- TDD-LTE B38/B39/B40/B41 (2600/1900/2300/2500MHz)
- 3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
- 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz)
- Network Type
- 4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- TDD-LTE B38/B40 (2600/2300MHz)
- 3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
- 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz)
- Software Features
- Quality of Service: Traffic Control(IP QoS)
- Operating Modes: 3G/4G Router, Wireless Router
- Management: Access Control, Local Management, Remote Management
- WAN Connection Type: Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)
- DHCP: Server, Client, DHCP Client List, Address Reservation
- Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ
- Dynamic DNS: DynDns, NO-IP
- VPN Pass-Through: PPTP, L2TP, IPSec
- Access Control: Parental Control, Local Management Control, Host List, Access Schedule, Rule Management
- Firewall Security: DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding
- Protocols: Supports IPv4 and IPv6
- Guest Network: 2.4GHz guest network x 1
- Box Contents
- 300Mbps Wireless N 4G LTE Router, TL-MR6400
- RJ45 Ethernet Cable
- Power Adapter
- Quick Installation Guide
|
|
Take full advantage of your cutting-edge 4G LTE network with the TL-MR6400, which can achieve download speeds of up to 150Mbps. The TL-MR6400 allows you to share your 4G LTE network with multiple Wi-Fi devices. |
 |
D5117B |
|
|
|
Supplied complete with built in connectors. ACMA approved. Single RJ45 8P8C |
 |
S9265 |
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x Micro USB Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. Micro USB 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
 |
D0374 |
|
- Sleek miniature design so small that once plugged in, can be left in a Laptop’s USB port
- Speedy wireless transmission at up to 150Mbps ideal for video streaming or internet calls
- Advanced Security: Supports 64/128 WEP, WPA, PA2/WPA-PSK/WPA2-PSK(TKIP/AES)
- Connect in no time with easy setup utility in 14 languages
- Works out of the box on Rasbmc KODI 2014.12.25. Raspbian 3.18.xx+ includes a driver, but needs a separate firmware file downloading and installing.
|
|
Wireless N Nano USB Adapter TL-WN725N allows you to connect a desktop or notebook computer to a wireless network and access high-speed Internet connection. Comply with IEEE 802.11n, they provide wireless speed up to 150Mbps |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
D4360 |
|
- Compact, cost-effective and powerful industrial LTE router for professional applications
- Support LTE Cat 4 up to 150 Mbps
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Teltonika Remote Management System compatible
- Digital Input/Output for remote monitoring and control
- Compact size, easy integration
- Worldwide support
|
|
This router is ideal for people who would like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse.
|
 |
D4192 |
|
- Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
- Supports MAC address auto-learning and auto-aging
- LED indicators for monitoring power, link, activity
- Plastic case, desktop or wall-mounting design
- External power adapter supply
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 8 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. |
 |
D4333 |
|
- Supports 802.11ac standard
- Simultaneous 2.4GHz 300 Mbps and 5GHz 867 Mbps connections for 1200 Mbps of total available bandwidth
- 4 external antennas and one internal antenna provide stable wireless connections and optimal coverage
- Easy network management at your fingertips with TP-Link Tether
- MU-MIMO achieves 2X efficiency by communicating with up to 2 devices at once
- Beamforming technology delivers wider wireless coverage
- Supports Access Point mode to create a new Wi-Fi access point
|
|
The Archer A6 creates a reliable and blazing-fast network powered by 802.11ac Wi-Fi technology. The 2.4GHz band delivers
speeds up to 300Mbps, ready for everyday tasks like emailing and web browsing, while the 5GHz band delivers speeds up to
867Mbps, ideal for HD video streaming and lag-free online gaming. |
 |
S9738 |
|
- Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for >5km long range wireless transmission (up to 15km depending on installation conditions)
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
|
|
TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. |
 |
D4320 |
|
- Superfast Wi-Fi – 300Mbps (2.4GHz) and 867Mbps (5GHz) speeds, are ideal for online gaming, HD streaming, and large file downloads
- Versatile Connectivity – With DSL, EWAN, and USB port, the Archer VR400 is fully compatible with the VDSL2/ADSL2+/ADSL2/ADSL standards, as well as fiber, cable and 3G/4G Internet services
- Superior Range – Three high gain antennas provide stable wireless connections and optimal coverage
- Beamforming Technology – Concentrates signal strength in the direction of your devices, delivering stable and highly efficient connections
- USB 2.0 Port – Supports storage and print service sharing, FTP and media servers as well as 3G/4G dongle
- Tether App – TP-LINK Tether provides the easiest way to access and manage the router on your iOS and Android devices
|
|
VDSL, ADSL2+ modem combined with the next generation of wireless routers utilising the 802.11ac standard providing up to 3 times the speed of 802.11n. Simultaneous dual band provides the ultimate performance for multi-user HD video streaming, gaming and more! |
 |
D4265 |
|
- NBN ready for FTTN / FTTB / FTTH / FTTP
- Blazing 3G/4G speeds and backward compatible with 3G modems
- 3G/4G and WAN failover guarantees an ‘always-online’ Internet connection
- Wireless N speed up to 300Mbps for a robust Wi-Fi network
- Supports PPPoE, Dynamic IP, Static IP, PPTP, L2TP Cable Internet Access
- Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK encryption
- Wireless security encryption easily at the push of the QSS button
- WDS wireless bridge provides seamless bridging to expand your wireless network
- IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC
- Parental Control allows parents or administrators to establish restricted access policies for children or staff
|
|
Share the freedom of 3G/4G! The TL-MR3420 3G/4G Wireless N Router allows users to share a 3G/4G mobile broadband connection with family and friends via wired or wireless connections. By connecting a 3G/4G USB modem to the routers, a Wi-Fi hotspot is insta |
 |
D4195 |
|
- All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps
- Supports Auto-MDI/MDIX function
- Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode
- Store and forward Switching scheme
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 16 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included.
Rack mountable. |
 |
D4347 |
|
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 two-pack delivers Wi-Fi to an area of up to 350 square metres. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267 Mbps and works with the major internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.
|
|
This Deco M5 Whole-Home Mesh Wi-Fi Router System is the ultimate whole-home Wi-Fi solution with comprehensive security and filtering. It delivers fast, uninterrupted Wi-Fi to every room, improving coverage, speed and reducing dead spots. Deco is also easy to set up and grows as you add devices to your home. Dual band AC1300. This system is a 2 pack |
 |
D4431 |
|
- 12 dBi gain across lower bands 698-960 MHz
- 14 dBi gain across bands 1710-2700 MHz
- 12 dBi gain across upper bands 3300-4000 MHz
- Ruggedised construction for Australian conditions
- Fully welded, powder coat aluminium design
- Stainless steel mounting clamp included
- 30 cm tail with pre-terminated N Female connector
- Ideal for high-speed 3G and 4G LTE applications
- Great for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G
|
|
The Blackhawk LPDA Antenna provides an ideal solution for 3G/ 4G voice and data applications. |
 |
D4430 |
|
- Ruggedised fully welded construction for extreme conditions
- Powder coated finish
- Mounting clamp included
- 30cm pig tail terminated N Female
- Includes 10m LMR 240 Lead
- Perfect solution for voice and data applications where high gain antennas are required
- Ideal for fixed wireless terminals, mobile broadband Internet and smart repeater applications
|
|
A 14dBi 698-960MHz directional 4G antenna. For voice and data applications where high gain antennas are required. Fully welded & powder coated design for added outdoor durability. Overall length: 1.3m. 10m N Type connection cable. 5 year warranty. |
 |
D4340 |
|
- Superior Extended Range – Four fixed external antennas extend Wi-Fi coverage by up to 14,000 sq. ft.
- 4-Stream for AC2600 Dual Band Wi-Fi – Simultaneous 800Mbps on 2.4GHz + 1733Mbps on 5GHz
- 4×4 MU-MIMO – Simultaneously transfers data to multiple devices for 4x faster performance
- Beamforming Technology – Send targeted Wi-Fi signal to individual devices for stronger connections
- Gigabit Ethernet Port – Provide faster wired connections to smart TVs, computers and gaming consoles
- Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement
- AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability
- TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device
- Ultimate Compatibility – Extend the range of any Wi-Fi router or wireless access point
|
|
Easy to use plug in high power dual band AC (2.4GHz/5.8GHz) wireless extenders for situations requiring increased bandwidth or distance. Operates as a relay station between your existing wireless AP or router & your Wi-Fi equipped device. |
 |
S9271 |
|
|
|
Say goodbye to electricians and costly drilling and climbing through roof cavities to power your network devices with this network switch. The switch has Power over Ethernet (PoE) that is built-in to it. |
 |
D0347 |
|
- High Speed WiFi– Up to 600Mbps speeds with 200Mbps on 2.4GHz and 433 Mbps on 5GHz, upgrades your devices to higher AC WiFi speeds.
- Dual Band Wireless – 2.4GHz and 5GHz band for flexible connectivity, upgrades your devices to work with the latest dual-band WiFi router for faster speed and extended range.
- Nano design – Small, unobtrusive design allows you to plug it in and forget it is even there
- Operating System – Supports Windows 10/8.1/8/7/XP, Mac OS X
- Advanced Security –Supports 64/128-bit WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK encryption standards
|
|
Barely bigger than the USB plug itself provides blazing fast AC wireless speeds to laptops & devices. Dual band. |
 |
D0348 |
|
- Ultimate Wi-Fi Speed – AC1300 (400 Mpbs on 2.4GHz band and 867 Mbps on 5GHz band) wireless speed with the next generation Wi-Fi - 802.11ac
- Dual Band Wireless – 2.4GHz and 5GHz band for flexible connectivity
- Mini design –Mini-sized design for convenient portability with a reliable high performance
- Super Speed USB 3.0 Port - Up to 10x faster transfer speeds than USB 2.0
- MU-MIMO - Delivers highly efficient wireless connection
- Supported Operating System – Windows 10/8.1/8/7/XP, Mac OS X (Mac OS 10.15 will be supported soon.)
|
|
High speed dual band wireless AC adaptor. Ideal upgrade for laptops and other devices. Mu-Mimo provides additional bandwidth when used with compatible routers. |
 |
A4498 |
|
- Supports auto-MDI/MDIX
- Supports TCP/IP server, TCP/IP Client & UDP
- Baud rate 300bps-230400bps
- Supports Modbus RTU
- Reload function
- RS485 support full duplex and half duplex
|
|
This serial to ethernet converter allows you to easily send serial RS232/422/485 over ethernet for controlling equipment over longer distances than traditional serial cables. |
 |
D4437 |
|
- Frequency Range: 698-960 MHz / 1710-2600MHz
- VSWR: <1.5
- Input Impedance: 50Ω
- Gain: 7/8dBi
- Polarization Type: Line polarization
- E-Plane Beamwidth: 65°
- H-Plane Beamwidth: 90°
- F/B Ratio: ≤23dB
- Max Power: 50W
- Lightning Protection: DC ground
- Connector Type: "N Type" Female
- RG58/U Cable Length: 300mm
- Radome Material: UV-Resistant ABS
- Radome Colour: White
- Working Temperature: -40°C ~ +60°C
- Weight: 600g
- Dimensions: 210 x 180 x 44 mm
|
|
The Blackhawk Indoor Wall Mount Antenna is designed to operate with all mobile carriers in mind, regardless of what frequency they operate on. |
