|
Description |
Downloads |
Specs |
Ordering |
|
![D4425 4G 6dBi Compact Vehicle Antenna](https://images.altronics.com.au/thb/d/D4425.jpg) |
D4425 |
|
|
|
A compact bullbar mount antenna with spring base providing up to 6dBi gain for your Cel-Fi 4G system. Overall length: 68cm. 4m SMA connection cable. |
![D4426 Blackhawk Trucker Edge Antenna](https://images.altronics.com.au/thb/d/D4426.jpg) |
D4426 NEW
|
|
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector
|
|
Designed to provide optimal gain across 3G and 4G bands used when travelling throughout Australia & abroad. |
![D4430 14dBi Yagi 698-960MHz 4G Booster Antenna](https://images.altronics.com.au/thb/d/D4430.jpg) |
D4430 |
|
- Ruggedised fully welded construction for extreme conditions
- Powder coated finish
- Mounting clamp included
- 30cm pig tail terminated N Female
- Includes 10m LMR 240 Lead
- Perfect solution for voice and data applications where high gain antennas are required
- Ideal for fixed wireless terminals, mobile broadband Internet and smart repeater applications
|
|
A 14dBi 698-960MHz directional 4G antenna. For voice and data applications where high gain antennas are required. Fully welded & powder coated design for added outdoor durability. Overall length: 1.3m. 10m N Type connection cable. 5 year warranty. |
![D4431 Blackhawk 12/14dBi LPDA 4G Booster Antenna](https://images.altronics.com.au/thb/d/D4431.jpg) |
D4431 |
|
- 12 dBi gain across lower bands 698-960 MHz
- 14 dBi gain across bands 1710-2700 MHz
- 12 dBi gain across upper bands 3300-4000 MHz
- Ruggedised construction for Australian conditions
- Fully welded, powder coat aluminium design
- Stainless steel mounting clamp included
- 30 cm tail with pre-terminated N Female connector
- Ideal for high-speed 3G and 4G LTE applications
- Great for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G
|
|
The Blackhawk LPDA Antenna provides an ideal solution for 3G/ 4G voice and data applications. |
![D4432 7dBi Blackhawk White Marine Antenna with Mount](https://images.altronics.com.au/thb/d/D4432.jpg) |
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
![D4437 Blackhawk 7/8dBi Wall Mount Panel Antenna](https://images.altronics.com.au/thb/d/D4437.jpg) |
D4437 |
|
- Frequency Range: 698-960 MHz / 1710-2600MHz
- VSWR: <1.5
- Input Impedance: 50Ω
- Gain: 7/8dBi
- Polarization Type: Line polarization
- E-Plane Beamwidth: 65°
- H-Plane Beamwidth: 90°
- F/B Ratio: ≤23dB
- Max Power: 50W
- Lightning Protection: DC ground
- Connector Type: "N Type" Female
- RG58/U Cable Length: 300mm
- Radome Material: UV-Resistant ABS
- Radome Colour: White
- Working Temperature: -40°C ~ +60°C
- Weight: 600g
- Dimensions: 210 x 180 x 44 mm
|
|
The Blackhawk Indoor Wall Mount Antenna is designed to operate with all mobile carriers in mind, regardless of what frequency they operate on. |
![D4440 Cel-Fi GO Mobile Repeater and Antenna](https://images.altronics.com.au/thb/d/D4440.jpg) |
D4440 |
|
- Boosts 3G/4G/4GX Telstra Mobile Signals (one band at a time)
- Up to 100dB of system gain (each 3dB is a doubling of power)
- Approved for use on the Telstra Network
- Supports voice, internet and other mobile services
- Provides signal for 20+ Telstra Mobile Devices
- Locked to the Telstra Mobile Network
- Cel-Fi WAVE App available
- No sim card required
- Ideal for homes, offices, vehicles, caravans, trucks, boats and outdoor applications
|
|
This mobile repeater provides an extension of the Telstra Mobile network for in-car use in areas with marginal coverage. |
![D4440A Roam R41 4G Booster - Unit Only](https://images.altronics.com.au/thb/d/D4440A.jpg) |
D4440A NEW
|
|
- Perfect for boosting 4G & 5G signals on 4WDs, trucks and fleet vehicles.
- Deploy the unit anywhere in the network, with full frequency coverage
- Latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelized coverage for specific mobile network operator signals
- Support for 3G, 4G, and 5G dynamic spectrum sharing (DSS)
- Ease of installation with plug-and-play operation
|
|
Unit only. External antenna sold separately. Stay connected wherever adventure takes you with the CEL-FI ROAM R41, a cutting-edge cellular signal booster designed to enhance your mobile experience. |
![D4455A Powertec RF SMA Power Divider 2 Way 698-3800MHz](https://images.altronics.com.au/thb/d/D4455A.jpg) |
D4455A NEW
|
|
- Frequency covers 698-3800MHz
- High Isolation
- Suitable for indoor applications
- Widely used in IBS & DAS
|
|
Powertec RF Power Divider: 2-Way, 698-3800MHz, SMA Female with 22dB isolation. High frequency coverage, indoor application suitability, and superior isolation for optimal performance. |
![D5040 Keystone Jack Dust Cover](https://images.altronics.com.au/thb/d/D5040.jpg) |
D5040 |
|
|
|
This rubber "push-in" plug simply fits into an RJ45 socket to keep dust out. Ideal for patch panels, wallplates, hubs, etc. |
![D5040A Keystone Jack Dust Cover](https://images.altronics.com.au/thb/d/D5040A.jpg) |
D5040A NEW
|
|
|
|
This rubber "push-in" plug simply fits into an RJ45 socket to keep dust out. Ideal for patch panels, wallplates, hubs, etc. |
![D5106A Cat6A RJ45 Joiner Coupler](https://images.altronics.com.au/thb/d/D5106A.jpg) |
D5106A ROHS
|
|
|
|
Cat6A approved network cable joiner. Straight through, pin to pin. |
![D5113A Single RJ45 Cat6A Keystone Wallplate](https://images.altronics.com.au/thb/d/D5113A.jpg) |
D5113A |
|
|
|
Keystone wallplates, ideal for telephone and computer use. Wall plates include connectors.
Size: 70W x 115H. |
![D5117B Single Keystone Surface Mount Wall Box RJ45 Cat6a](https://images.altronics.com.au/thb/d/D5117B.jpg) |
D5117B |
|
|
|
Supplied complete with built in connectors. ACMA approved. Single RJ45 8P8C |
![D5118A Dual Keystone Surface Mount Wall Box RJ45 Cat6a](https://images.altronics.com.au/thb/d/D5118A.jpg) |
D5118A |
|
|
|
Supplied complete with connectors. Dual Cat 6a sockets are ACMA approved. |
![D5134A 24 Port 1RU Enhanced Cat6 Patch Panel](https://images.altronics.com.au/thb/d/D5134A.jpg) |
D5134A |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
![D5135 24 Port 1RU Cat6A Patch Panel](https://images.altronics.com.au/thb/d/D5135.jpg) |
D5135 |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
![D5137A 24 Port 1RU Enhanced Cat6A Patch Panel](https://images.altronics.com.au/thb/d/D5137A.jpg) |
D5137A |
|
- Electrical Specifications
- Voltage Rating: 125V AC RMS
- Current Rating: 1.5A
- Contact Resistance: 100milliohms (max)
- Insulation Resistance: 1000megohms (min @ 500V DC)
- Dielectric Strength: 750V AC RMS @ 60Hz for 1 minute
- Environmental Specifications
- Storage Temperature: -40°C ~ +85°C
- Operating Temperature: 0°C ~ +70°C
- Mechanical Specifications
- Housing Material: PC
- Panel Frame: Carbon steel, black powder coated
- PCB Material: FR-4 T=1.6mm
- IDC Material: PC
- Contact: Phosphor bronze with nickel plating
- RJ45 Jack Life: 750 times (min)
- IDC Life: 200 times (min)
- Wire Gauge: 22-26AWG
|
|
This 1RU panel is fitted with 24 RJ45 "back to back" coupler ports for tool free cable termination. Port numbers fields can be written on and fitted securely behind a clear lexan. Black finish. Includes rear cable support bar with earthing strap. |
![D5139 48 Port 1RU Cat6A Coupler Panel](https://images.altronics.com.au/thb/d/D5139.jpg) |
D5139 |
|
|
|
This 1RU panel is fitted with 24 RJ45 "back to back" coupler ports for tool free cable termination. Port numbers fields can be written on and fitted securely behind a clear lexan. Black finish. Includes rear cable support bar with earthing strap. |
![DE4213A 8 Port + 2 Link Ports PoE 10/100 Switch For IP Camera Systems](https://images.altronics.com.au/thb/d/DE4213A.jpg) |
DE4213A |
|
- POE Port: 1 to 8 support IEEE802.3AF/AT Standard
- Output Power: 15.4W/30W IEEE802.3af/at
- Power Pin: Both 1/2+,3/6- and 4/5+7/8-
- Whole Power: ≤150W (52V 1.8A)
- POE Portocol: IEEE 802.3af/IEEE 802.3at
- POE Type: End-span
- Power Distance: ≤150m
- Network Standard: IEEE 802.3, IEEE802.3u,802.3x,802.3af/at
- Network Medium: 10/100BASE-TX:5 class and above non shielded twisted pair
- Data Distance: ≤150m
- Switch Capability: 1.6Gbps
- Forwarding Mode: Store and forward
- Forwarding Rate: 10BASE-T:14880PPS/port, 100BASE-tx:14800pps/port
- MAC Address: MAC address table 1K
- Port Function: Power priority mechanism, fast and forward, MAC automatic learning and aging, IEEE802.3X Full-duplex and mode and backpressure for Half-duplex mode
- LED Indicator: Each port occupied 1 LINK/ACT.100Mbps, POE Status Indicator, Whole power indicator
- Working Environment: Working temperature:-10°-- 55°C
- Weight: 1.7kg
- Size: 270mm*180mm*44mm(L*W*H)
|
|
Designed to deliver both power and ethernet connection to IEEE 802.3af compliant Powered Devices (PDs) such as IP cameras. Includes 8 PoE output ports, plus 2 link ports for connection back to the network video recorder. |
![S9265 PoE Splitter Micro USB 5V Adapter](https://images.altronics.com.au/thb/s/S9265.jpg) |
S9265 |
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x Micro USB Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. Micro USB 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
![S9265A PoE Splitter USB Type C 5V Adapter](https://images.altronics.com.au/thb/s/S9265A.jpg) |
S9265A NEW
|
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x USB C Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. USB C 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
![S9266 Power Over Ethernet (PoE) Splitter](https://images.altronics.com.au/thb/s/S9266.jpg) |
S9266 |
|
|
|
Allows you to power non PoE equipped devices
from a 802.3af Power Over Ethernet RJ45 cable.
Eliminates the need for a power supply at the
camera end of the cable run. 12V, 15.4W max. |
![S9268 Ethernet Over Coaxial Transceiver](https://images.altronics.com.au/thb/s/S9268.jpg) |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
5.5W |
-
7W |
-
9W |
-
12W |
-
17W |
-
-
-
Maximum Coax RG6. Data Link Distance |
-
-
-
DC56V Power Supplied |
-
2000m |
-
600m |
-
500m |
-
400m |
-
300m |
-
200m |
-
-
-
-
Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
16W |
-
18W |
-
19.5W |
-
20W |
-
22W |
-
-
-
Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
DC56V Power Supplied |
-
600m |
-
600m |
-
500m |
-
400m |
-
300m |
-
200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
![S9270 Ethernet Over Coaxial Master Transceiver](https://images.altronics.com.au/thb/s/S9270.jpg) |
S9270 |
|
|
|
These PoE transceiver units allow ethernet and power to be sent along coaxial cabling.
|
![S9271 PoE Passive Adaptor Kit](https://images.altronics.com.au/thb/s/S9271.jpg) |
S9271 |
|
|
|
Say goodbye to electricians and costly drilling and climbing through roof cavities to power your network devices with this network switch. The switch has Power over Ethernet (PoE) that is built-in to it. |
![S9274 Waterproof IP PoE Camera Joiner Pair](https://images.altronics.com.au/thb/s/S9274.jpg) |
S9274 |
|
- 1 LAN-In (Data + Power) +1 LAN-Out (Data Only)
- Take Power from PSE
- 5v 12v 24v 48v Passive POE
- 5v 12v 24v 48v Cheap price of cable type passive POE splitter
- Splitter: RJ45 Female to RJ45 Male + Power Out
- Passive PoE - means that input and output voltage are equal.
- Works with all DC powered non-PoE devices
- Supports 5V, 12V, 24V, 48V
- Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.
- Uses industry standard 5.5mm x 2.1mm power plugs
- Can work up to 150ft (depending on the quality of the cable and the power draw of the device)
|
|
These camera joiners come as a pair and have a transmission distance of under 70m. The input power of the joiners is 12V-48V. The joiners add to a professional appearance for IP camera power cabling. The joiners also make IP camera installation easier by saving time plus creating a more secure cable connection.
|
![S9722a Omni 5Db SMA 2.4Ghz Wireless Antenna White](https://images.altronics.com.au/thb/s/S9722A.jpg) |
S9722A |
|
- Gain: +5 dB
- Connector: SMA Male
- Operating frequency: 2.4Ghz
- Impedance: 50Ω
- Dimensions (mm): 12.5 x 195
- Weight: 30g
|
|
5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection. |
![S9738 CPE210 2.4GHz 9dBi Wireless Access Point](https://images.altronics.com.au/thb/s/S9738.jpg) |
S9738 |
|
- Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for >5km long range wireless transmission (up to 15km depending on installation conditions)
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
|
|
TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. |
![S9740 CPE510 5GHz 13dBi Wireless Access Point](https://images.altronics.com.au/thb/s/S9740.jpg) |
S9740 |
|
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
|
|
TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. |
![S9745 EAP110 2.4GHz 300Mbps Ceiling Mount Wireless Access Point](https://images.altronics.com.au/thb/s/S9745.jpg) |
S9745 |
|
- EAP Controller Software enables administrators to easily manage hundreds of EAPs
- Support Passive PoE for convenient and affordable installation
- Simple mounting design to easily mount to a wall or ceiling
- 300Mbps wireless data rate for uninterrupted wireless connection
- Captive portal provides one convenient method of authentication for Wi-Fi guests
- Rate limit on per SSID to restrict the bandwidth of each client
- Access Control restricts or allows the client to access the specified network segment
- Reboot Schedule enables all the APs to be rebooted automatically within a specified time
- WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN
- Multi-SSID divides multiple wireless network for different users
- Load balance ensures large numbers of users have smooth network experiences in large business networks
- Compatible with 802.11 b/g/n products
- Multiple operating modes satisfy different application conditions including managed AP and standalone AP modes
- QoS function prioritizes data, voice, and video applications to ensure time-sensitive traffic takes priority over all other traffic
- Prevents dust from dropping onto the PCB through bypass louver, which ensures long-term, unhindered operation.
|
|
As a long range indoor wireless device, the EAP110 is designed to provide a multiple connection and long distance wireless networking solution. It operates seamlessly in the 2.4GHz frequency spectrum and provides wireless data transfer rates of up to 300Mb |
![S9747 EAP225 AC1350 Wireless Gigabit Ceiling Mount Access Point](https://images.altronics.com.au/thb/s/S9747.jpg) |
S9747 |
|
- Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralised Cloud Management, and Intelligent Monitoring.
- Centralised Management: Cloud access and Omada app for ultra convenience and easy management.
- Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.
- PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter included) for flexible installations.
- Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
- Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies.
|
|
As a long range indoor wireless device, the EAP225 is designed to provide a multiple connection and long distance wireless networking solution. It operates seamlessly in the 2.4GHz and 5GHz frequency spectra and provides wireless data transfer rates of up to 1200Mb |
![S9749A EAP620HD AX1800 Wireless Dual Band Ceiling Mount Access Point](https://images.altronics.com.au/thb/s/S9749A.jpg) |
S9749A NEW
|
|
- Ultra-Fast Wi-Fi 6 Speeds
- 4× increased capacity to connect more devices simultaneously
- Integrated into Omada SDN
- Cloud access and Omada app for ultra convenience and easy management.
- Seamless Roaming
- PoE+ Support
- Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
|
|
This high performance ceiling mount wireless access point for general corporate Wi-Fi features the latest 802.11ax technologies like 1024 QAM and Long OFDM Symbol, which allows the EAP to boost overall speeds up to 1775 Mbps (1201 Mbps on a 5 GHz band and 574 Mbps on a 2.4 GHz band) |