|
Description |
Downloads |
Specs |
Ordering |
|
 |
D5135 |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
 |
D4422 |
|
- 3 dBi gain across lower bands 698 to 960 MHz
- 3 dBi gain across upper bands 1710 to 2700 MHz
- Mounting by 3M adhesive
- SMA Male connector
- Cable length 3 meters
|
|
The Blackhawk 4G & IoT adhesive mount antenna is a modest performing mobile antenna that covers most worldwide 4G cellular bands between 700 and 2700 MHz. |
 |
D4425 |
|
|
|
A compact bullbar mount antenna with spring base providing up to 6dBi gain for your Cel-Fi 4G system. Overall length: 68cm. 4m SMA connection cable. |
 |
S9722A |
|
- Gain: +5 dB
- Connector: SMA Male
- Operating frequency: 2.4Ghz
- Impedance: 50Ω
- Dimensions (mm): 12.5 x 195
- Weight: 30g
|
|
5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection. |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
D5118A |
|
|
|
Supplied complete with connectors. Dual Cat 6a sockets are ACMA approved. |
 |
D4360 |
|
- Compact, cost-effective and powerful industrial LTE router for professional applications
- Support LTE Cat 4 up to 150 Mbps
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Teltonika Remote Management System compatible
- Digital Input/Output for remote monitoring and control
- Compact size, easy integration
- Worldwide support
|
|
This router is ideal for people who would like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse.
|
 |
S9265 |
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x Micro USB Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. Micro USB 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
 |
D4266 |
|
- Interface: 3 10/100Mbps LAN Ports, 1 10/100Mbps LAN/WAN Port, 1 SIM Card Slot
- Button: WPS/Reset Button, Wireless On/Off Button, Power On/Off Button
- External Power Supply: 9V/1A
- Dimensions ( W x D x H ): 202 x 141 x 33.6 mm
- Antenna Type: 2 Internal Wi-Fi Antennas, 2 Detachable External 4G LTE Antennas
- Compatibility: NBN - Fibre to the Premises (FTTP) - Wireless Router Mode. NBN - Fibre to the Home (FTTH) - Wireless Router Mode.
- Wireless Features
- Wireless Standards: IEEE 802.11b/g/n 2.4GHz
- Frequency: 2.4GHz
- Signal Rate: 300Mbps at 2.4GHz
- Reception Sensitivity: 11g 54M: -74dBm, 11n HT20: -71dBm, 11n HT40: -67dBm
- Transmit Power: CE: <20dBm(2.4GHz)
- Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
- Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions
- Network Type (V2):
- T4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- TDD-LTE B38/B39/B40/B41 (2600/1900/2300/2500MHz)
- 3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
- 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz)
- Network Type
- 4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
- TDD-LTE B38/B40 (2600/2300MHz)
- 3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)
- 2G: EDGE/GPRS/GSM Quad Band (850/900/1800/1900MHz)
- Software Features
- Quality of Service: Traffic Control(IP QoS)
- Operating Modes: 3G/4G Router, Wireless Router
- Management: Access Control, Local Management, Remote Management
- WAN Connection Type: Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)
- DHCP: Server, Client, DHCP Client List, Address Reservation
- Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ
- Dynamic DNS: DynDns, NO-IP
- VPN Pass-Through: PPTP, L2TP, IPSec
- Access Control: Parental Control, Local Management Control, Host List, Access Schedule, Rule Management
- Firewall Security: DoS, SPI Firewall, IP Address Filter/Domain Filter, IP and MAC Address Binding
- Protocols: Supports IPv4 and IPv6
- Guest Network: 2.4GHz guest network x 1
- Box Contents
- 300Mbps Wireless N 4G LTE Router, TL-MR6400
- RJ45 Ethernet Cable
- Power Adapter
- Quick Installation Guide
|
|
Take full advantage of your cutting-edge 4G LTE network with the TL-MR6400, which can achieve download speeds of up to 150Mbps. The TL-MR6400 allows you to share your 4G LTE network with multiple Wi-Fi devices. |
 |
D5117B |
|
|
|
Supplied complete with built in connectors. ACMA approved. Single RJ45 8P8C |
 |
D0374 |
|
- Sleek miniature design so small that once plugged in, can be left in a Laptop’s USB port
- Speedy wireless transmission at up to 150Mbps ideal for video streaming or internet calls
- Advanced Security: Supports 64/128 WEP, WPA, PA2/WPA-PSK/WPA2-PSK(TKIP/AES)
- Connect in no time with easy setup utility in 14 languages
- Works out of the box on Rasbmc KODI 2014.12.25. Raspbian 3.18.xx+ includes a driver, but needs a separate firmware file downloading and installing.
|
|
Wireless N Nano USB Adapter TL-WN725N allows you to connect a desktop or notebook computer to a wireless network and access high-speed Internet connection. Comply with IEEE 802.11n, they provide wireless speed up to 150Mbps |
 |
D4192 |
|
- Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
- Supports MAC address auto-learning and auto-aging
- LED indicators for monitoring power, link, activity
- Plastic case, desktop or wall-mounting design
- External power adapter supply
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 8 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. |
 |
D4333 |
|
- Supports 802.11ac standard
- Simultaneous 2.4GHz 300 Mbps and 5GHz 867 Mbps connections for 1200 Mbps of total available bandwidth
- 4 external antennas and one internal antenna provide stable wireless connections and optimal coverage
- Easy network management at your fingertips with TP-Link Tether
- MU-MIMO achieves 2X efficiency by communicating with up to 2 devices at once
- Beamforming technology delivers wider wireless coverage
- Supports Access Point mode to create a new Wi-Fi access point
|
|
The Archer A6 creates a reliable and blazing-fast network powered by 802.11ac Wi-Fi technology. The 2.4GHz band delivers
speeds up to 300Mbps, ready for everyday tasks like emailing and web browsing, while the 5GHz band delivers speeds up to
867Mbps, ideal for HD video streaming and lag-free online gaming. |
 |
D4265 |
|
- NBN ready for FTTN / FTTB / FTTH / FTTP
- Blazing 3G/4G speeds and backward compatible with 3G modems
- 3G/4G and WAN failover guarantees an ‘always-online’ Internet connection
- Wireless N speed up to 300Mbps for a robust Wi-Fi network
- Supports PPPoE, Dynamic IP, Static IP, PPTP, L2TP Cable Internet Access
- Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK encryption
- Wireless security encryption easily at the push of the QSS button
- WDS wireless bridge provides seamless bridging to expand your wireless network
- IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC
- Parental Control allows parents or administrators to establish restricted access policies for children or staff
|
|
Share the freedom of 3G/4G! The TL-MR3420 3G/4G Wireless N Router allows users to share a 3G/4G mobile broadband connection with family and friends via wired or wireless connections. By connecting a 3G/4G USB modem to the routers, a Wi-Fi hotspot is insta |
 |
S9738 |
|
- Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for >5km long range wireless transmission (up to 15km depending on installation conditions)
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
|
|
TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. |
 |
D4195 |
|
- All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps
- Supports Auto-MDI/MDIX function
- Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode
- Store and forward Switching scheme
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 16 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included.
Rack mountable. |
 |
D4347 |
|
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 two-pack delivers Wi-Fi to an area of up to 350 square metres. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267 Mbps and works with the major internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.
|
|
This Deco M5 Whole-Home Mesh Wi-Fi Router System is the ultimate whole-home Wi-Fi solution with comprehensive security and filtering. It delivers fast, uninterrupted Wi-Fi to every room, improving coverage, speed and reducing dead spots. Deco is also easy to set up and grows as you add devices to your home. Dual band AC1300. This system is a 2 pack |
 |
D4320 |
|
- Superfast Wi-Fi – 300Mbps (2.4GHz) and 867Mbps (5GHz) speeds, are ideal for online gaming, HD streaming, and large file downloads
- Versatile Connectivity – With DSL, EWAN, and USB port, the Archer VR400 is fully compatible with the VDSL2/ADSL2+/ADSL2/ADSL standards, as well as fiber, cable and 3G/4G Internet services
- Superior Range – Three high gain antennas provide stable wireless connections and optimal coverage
- Beamforming Technology – Concentrates signal strength in the direction of your devices, delivering stable and highly efficient connections
- USB 2.0 Port – Supports storage and print service sharing, FTP and media servers as well as 3G/4G dongle
- Tether App – TP-LINK Tether provides the easiest way to access and manage the router on your iOS and Android devices
|
|
VDSL, ADSL2+ modem combined with the next generation of wireless routers utilising the 802.11ac standard providing up to 3 times the speed of 802.11n. Simultaneous dual band provides the ultimate performance for multi-user HD video streaming, gaming and more! |
 |
D5139 |
|
|
|
This 1RU panel is fitted with 24 RJ45 "back to back" coupler ports for tool free cable termination. Port numbers fields can be written on and fitted securely behind a clear lexan. Black finish. Includes rear cable support bar with earthing strap. |
 |
D4430 |
|
- Ruggedised fully welded construction for extreme conditions
- Powder coated finish
- Mounting clamp included
- 30cm pig tail terminated N Female
- Includes 10m LMR 240 Lead
- Perfect solution for voice and data applications where high gain antennas are required
- Ideal for fixed wireless terminals, mobile broadband Internet and smart repeater applications
|
|
A 14dBi 698-960MHz directional 4G antenna. For voice and data applications where high gain antennas are required. Fully welded & powder coated design for added outdoor durability. Overall length: 1.3m. 10m N Type connection cable. 5 year warranty. |
 |
D4431 |
|
- 12 dBi gain across lower bands 698-960 MHz
- 14 dBi gain across bands 1710-2700 MHz
- 12 dBi gain across upper bands 3300-4000 MHz
- Ruggedised construction for Australian conditions
- Fully welded, powder coat aluminium design
- Stainless steel mounting clamp included
- 30 cm tail with pre-terminated N Female connector
- Ideal for high-speed 3G and 4G LTE applications
- Great for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G
|
|
The Blackhawk LPDA Antenna provides an ideal solution for 3G/ 4G voice and data applications. |
 |
D4340 |
|
- Superior Extended Range – Four fixed external antennas extend Wi-Fi coverage by up to 14,000 sq. ft.
- 4-Stream for AC2600 Dual Band Wi-Fi – Simultaneous 800Mbps on 2.4GHz + 1733Mbps on 5GHz
- 4×4 MU-MIMO – Simultaneously transfers data to multiple devices for 4x faster performance
- Beamforming Technology – Send targeted Wi-Fi signal to individual devices for stronger connections
- Gigabit Ethernet Port – Provide faster wired connections to smart TVs, computers and gaming consoles
- Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement
- AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability
- TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device
- Ultimate Compatibility – Extend the range of any Wi-Fi router or wireless access point
|
|
Easy to use plug in high power dual band AC (2.4GHz/5.8GHz) wireless extenders for situations requiring increased bandwidth or distance. Operates as a relay station between your existing wireless AP or router & your Wi-Fi equipped device. |
 |
D4361 |
|
- RUT950 is highly reliable and secure LTE router for professional applications
- Support LTE Cat 4 up to 150 Mbps
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Increase connection reliability with automatic SIM switching
- 4x Ethernet ports with VLAN functionality
- Teltonika Remote Management System compatible
- Worldwide support
|
|
This router is ideal for people who&bdquod like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse. |
 |
A4498 |
|
- Supports auto-MDI/MDIX
- Supports TCP/IP server, TCP/IP Client & UDP
- Baud rate 300bps-230400bps
- Supports Modbus RTU
- Reload function
- RS485 support full duplex and half duplex
|
|
This serial to ethernet converter allows you to easily send serial RS232/422/485 over ethernet for controlling equipment over longer distances than traditional serial cables. |
 |
S9271 |
|
|
|
Say goodbye to electricians and costly drilling and climbing through roof cavities to power your network devices with this network switch. The switch has Power over Ethernet (PoE) that is built-in to it. |
