|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1310 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1042 ROHS
|
|
- Switch type: SPST
- Contact rating:10A @ 250V AC
- Mounting hole diameter: 12mm
|
|
With On-Off plate and metal actuator. |
 |
S1315 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1010 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 30A@12VDC
- Mounting Hole Diameter: 12mm
- Actuator: Plastic (with inbuilt LED)
|
|
SPST switch with red LED built into toggle handle. |
 |
S1040 ROHS
|
|
- Contact Rating: 2A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
With On-Off plate and metal actuator. |
 |
S1043 |
|
- Action: Momentary On - Off - Momentary On.
- Plate: On-Off-On
- Contact rating: 10A @ 250V AC
- Mounting hole diameter: 12mm
- Actuator: Metal
- Contact resistance: 50mΩ max.
- Insulation resistance: >1000MΩ
- Dielectric strength: >1500V AC 1 minute
|
|
Plate: On-Off-On
Contact rating: 10A @ 250V AC
Mounting hole diameter: 12mm
Actuator: Metal
Contact resistance: 50mΩ max.
Insulation resistance: >1000MΩ
Dielectric strength: >1500V AC 1 minute |
 |
S1044 ROHS
|
|
- A heavy duty toggle switch featuring alternate action in both directions. 10A @ 250V AC rated for automotive and industrial applications.
|
|
Switch Type: SPDT
Contact Rating: 10A@250VAC
Mounting Hole Diameter: 12mm
Actuator: Metal |
 |
S1053 ROHS
|
|
- Contact Rating: 10A @ 220V AC
- Mounting Hole Diameter: 12mm
- Switch Type: Momentary On (Both Positions)
|
|
With On-Off-On plate and metal actuator.
Water Proof Cover to suit (S 1035) |
 |
S1345 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1052 ROHS
|
|
- Contact Rating: 10A @ 220V AC
- Mounting Hole Diameter: 12mm
|
|
With On-Off plate and metal actuator.
Water Proof Cover to suit (S 1035) |
|
S1046 ROHS
|
|
- Switch Type: SPDT
- Contact Rating: 10A@250VAC
- Mounting Hole Diameter: 12mm
- Actuator: Metal
|
|
Switch Type: SPDT
Contact Rating: 10A@250VAC
Mounting Hole Diameter: 12mm
Actuator: Metal |
 |
S1047 |
|
- Plate: On-Off
- Contact rating: 10A @ 250V AC
- Actuator: Metal
- Contact resistance: 50mΩ max.
- Insulation resistance: >1000MΩ
- Dielectric strength: >1500V AC 1 minute
|
|
With On-Off plate and metal actuator.
Water Proof Cover to suit (S 1035) |
 |
S1055 |
|
- Switch Type: DPDT Centre Off
- Contact Rating: 6A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
DPDT switch with On-Off-On plate. Locks on in both directions.
With metal actuator. |
 |
S1250 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1036 ROHS
|
|
|
|
Turn a regular toggle into a missile launch style switch.
Prevents accidental activation. Cover turns switch off when snapped down. Suits S 1040, S 1042, S 1050 and S 1052. |
 |
S1385 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-mThe Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom |
 |
S1346 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Thread OD: 11.45mm
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1333 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
MOMENTARY ON BOTH SIDES. CENTRE OFF
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the S |
|
S1330 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1054 |
|
- Switch Type: DPDT Centre Off
- Contact Rating: 6A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
DPDT switch with On-Off-Mom On plate. Locks on in both directions. With metal actuator. |
 |
S1350 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1316 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1415 ROHS
|
|
- Contact Rating: 1.5A @ 240V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1035 ROHS
|
|
|
|
To suit S1042/52 switches. |
 |
S1050 |
|
- Contact Rating: 3A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
With On-Off plate and metal actuator. |
