|
Description |
Downloads |
Specs |
Ordering |
|
|
S1086 ROHS
|
|
- Colour: Red
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
|
S3265 ROHS
|
|
- Switch Type: SPDT Momentary
- Contact Rating: 3A @ 250VAC resistive load
- Contact Resistance: <15mR
- Actuator Length: 37mm
|
|
A handy miniature limit microswitch with 37mm actuator. This size is commonly found in joystick designs in industrial and amusement equipment. Ideal for replacement or new mechatronic designs. |
|
S2720 |
|
- Contact Rating: 5A @ 250VAC
- Contact Resistance: 25mΩ (initial)
- Insulation Resistance: >100MΩ DC 500V
- Operating Speed: 5mm-50cm/s
- Dielectric Strength: >1000VAC 1 minute
- Mechanical Life: >1,000,000 cycles
- Electrical Life: >100,000 cycles
|
|
IP65 rated sealed construction for excellent weather, dust and oil resistance. perfect for sliding and roller doors. |
|
S0937 ROHS
|
|
- Colour: Blue
- Action: Alternate
- Switch type: DPDT
- Contact rating: 3A @ 250V AC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- LED: 12V AC/DC
- Dielectric strength: 1000V between poles
- Electrical life: >30,000 cycles
|
|
DPDT alternate LED blue solder tail push button switch. |
|
S1112A ROHS
|
|
- Switch Type: PCB Mount SPST Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance: < 100m Ohm
|
|
0.8mm Actuator SMD |
|
S0921 |
|
|
|
Switch type: SPDT Contact rating:16A @ 250V AC
Contact resistance: <50mΩ Insulation resistance: >100M&Ω
LED: 12V AC/DC Dialectric strength: 1000V between poles
Electrical life: >30,000 cycles
|
|
S3270 |
|
- Rating: 15A 125 / 250 VAC
- Terminal: A ( Solder )
- Circuit Position: S.P.D.T.
- Operating Force (OF): max.200 g
- Releasing Force (RF): min. 28 g
- Pre-Travel (PT): max. 2.5mm
- Over-Travel (OT): min. 1.6mm
- Movement Differential (MD): max. 1.2mm
- Operating Position (OP): 18.2+1.2mm
- Dielectric Strength (between contacts): 1,000 VAC ; 50 / 60 HZ for 1 minute
- Dielectric Strength (between terminal and ground): 1,500 VAC ; 50 / 60 HZ for 1 minute
- Mechanically Service Life: 5,000,000 operations / (min.)
- Electrically Service Life: 500,000 operation /(min.)(at rated load)
- Ambient Temperature: 25°C ~ 180°C
|
|
Rating: 15A 125 / 250 VAC
Type: SPDT
Actuator: None |
|
S1087 ROHS
|
|
- Colour: Red
- Type: SPST
- Action: Alternate
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
SPST momentary LED red solder tail pushbutton switch. |
|
S0934 ROHS
|
|
- Colour: Red
- Action: Alternate
- Switch type: DPDT
- Contact rating: 3A @ 250V AC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- LED: 12V AC/DC
- Dielectric strength: 1000V between poles
- Electrical life: >30,000 cycles
|
|
DPDT alternate LED red solder tail push button switch. |
|
S5381 ROHS
|
|
- Contacts: Conductive rubber
- Rating: 20mA @ 24V DC
- Contact Resistance: 200 Ohms Max
- Key Face Dimensions: 46 x 57mm
- Life Expectancy: 10 million operations per key
|
|
3 x 4 way matrix. As used with DTMF telephones and security applications. |
|
S1124 ROHS
|
|
- Switch Type: PCB Mount SPST Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance: < 100mΩ
|
|
5.5mm Actuator |
|
S1085 |
|
- Colour: Green
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
|
S1080 ROHS
|
|
- Contact rating : 3A @ 250V AC
- Mounting Hole Dia. : 12mm
|
|
SPST Momementry with a red cap |
|
S3260 ROHS
|
|
- Switch Type: SPDT Momentary
- Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
- Contact Resistance: <15mR
- Actuator Length: 27mm
- Connection: 4.8mm spade
|
|
Switch Type: SPDT Momentary
Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
Contact Resistance: <15mR
Actuator Length: 27mm |
|
S0931 ROHS
|
|
- Colour: Green
- Action: Momentary
- Switch type: DPDT
- Contact rating: 3A @ 250V AC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- LED: 12V AC/DC
- Dielectric strength: 1000V between poles
- Electrical life: >30,000 cycles
|
|
Switch type: DPDT
Contact rating: 3A @ 250V AC
Contact resistance: <50mΩ
Insulation resistance: >100MΩ
LED: 12V AC/DC
Dialectric strength: 1000V between poles
Electrical life: >30,000 cycles
|
|
S1122 ROHS
|
|
- Switch Type: PCB Mount SPST Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance: < 100mΩ
- Force: 260gf
|
|
3.5mm Actuator |
|
S3262 ROHS
|
|
- Switch Type: SPDT Momentary
- Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
- Contact Resistance: <15mR
- Actuator Length: 51mm
- Connection: 4.8mm spade
|
|
Switch Type: SPDT Momentary
Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
Contact Resistance: <15mR
Actuator Length: 51mm |
|
S0160 |
|
- Switch type: DPDT
- Contact rating: 500mA @ 250V AC 1A @ 24V DC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- Dialectric strength: 1000V between poles
- Electrical life: >50,000 cycles
- Ingress protection rating: IP65
|
|
Alternate action latches in off position. Rotating the spring loaded actuator clockwise allows circuit to reconnect. |
|
S1145 |
|
- Axis Potentiometers: 2 x 10kΩ
- Switch type: SPST momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance: < 100mΩ
- Insulation resistance: >100MΩ
- Life: 100,000 cycles
- Push down centre of joystick for tactile switch.
|
|
X Y Axis analog type potentiometer joystick control with a centre pushbutton activate switch. |
|
S1405 ROHS
|
|
|
|
Momentary, 1.5A rated @ 250V AC |
|
S1670 ROHS
|
|
- SPDT Momentary Action - Red
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Red
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation res |
|
S1391 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1393 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1152A |
|
- Contact Form: DPDT
- Switch Function: ON-ON
- Maximum Current Rating (A): 4
- Type: Push Button
- Voltage Rating (AC): 250
- Actuator Type: Round Button
- Color: Black
- Color - Actuator/Cap: Chrome
- Number of Positions: 2
- Mounting Style: Panel
- Termination Style: Solderable Lug
- Number of Pins: 6
- Length (inch): 0.89
- Width (inch): 0.71
- Depth (inch): 0.75
- Height (inch): 0.46
- Actuator Length (inch): 0.4
- Lead Spacing A (inch): 0.35
- Lead Spacing B (inch): 0.35
- Features: Stomp Switch
- Maximum Contact Resistance: 50 mΩ
- Minimum Insulation Resistance: 100 MΩ
- Dielectric Strength: 1000 VAC
- Electrical Life: 20,000 operations
- Maximum Current Rating: 4
|
|
The sturdy little stomp switches that you find on guitar effects pedals.
Switch Type: DPDT momentary
Contact rating: 4A @ 250V AC
Contact resistance: <80m&Omega
Mounting hole diam.: 12mm |
|
S1072 |
|
|
|
Momentary SPST pushbutton switch. |