|
Description |
Downloads |
Specs |
Ordering |
|
![M8133 1500W 12V To 240V Pure Sine Wave Inverter & Solar Charger](https://images.altronics.com.au/thb/m/M8133.jpg) |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
![N1117A 200W Heavy Duty Solar Panel Blanket](https://images.altronics.com.au/thb/n/N1117A.jpg) |
N1117A NEW
|
|
- Top grade monocrystalline panels
- Durable encapsulated panels with anti-reflective design
- Tough canvas outer with double stitched panels
- Four pop out stands on rear for freestanding use
- Metal hanging hooks on each panel
- Weather resistant design
- 5m Anderson connection cable
|
|
Provide portable charging power for your campsite set up. Double stitched panels, durable webbing straps and metal hanging loops and zippered cable pocket. Folds up and secures with velcro for a fast getaway! 5m Anderson cable connection. |
![N1114A 100W Heavy Duty Solar Panel Blanket](https://images.altronics.com.au/thb/n/N1114A.jpg) |
N1114A NEW
|
|
- Top grade monocrystalline panels
- Durable encapsulated panels with anti-reflective design
- Tough canvas outer with double stitched panels
- Metal hanging hooks on each panel
- Weather resistant design
- 5m Anderson connection cable
|
|
Provide portable charging power for your campsite set up. Double stitched panels, durable webbing straps and metal hanging loops and zippered cable pocket. Folds up and secures with velcro for a fast getaway! 5m Anderson cable connection.
|
![N0200F 200W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0200F.jpg) |
N0200F
|
|
- Maximum power: 200W
- Nominal Voltage: 12V
- Short circuit current (ISC): 10.34A
- Open circuit voltage: 24.8V
- Maximum power current (IMP): 9.62A
- Maximum power voltage: 20.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1630 x 35 mm
- Operating Temperature: -40°C to +85°C
|
|
This quality 200W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
![N0160F 160W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0160F.jpg) |
N0160F |
|
- Maximum power: 160W
- Nominal voltage: 12V
- Short circuit current (ISC): 9.25A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 8.89A
- Maximum power voltage: 18V
- Connection: MC-4 Plug
- Dimensions: 664 x 1479 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 160W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
![M8199A Portable MPPT Solar Power Generator 100W](https://images.altronics.com.au/thb/m/M8199A.jpg) |
M8199A
|
|
- 14Ah internal lithium-ion battery
- 100W modified sine wave 240V AC inverter
- 6A 4 x USB output (Type A, C & QC3.0)
- 3 x 2.1mm DC jack output (180W max)
- MPPT solar charger in-built
- Recharge by solar panel, mains or car charger
- In-built LED torch
- In-built reading LED light panel
- Colour LCD screen with capacity readout
- Ultra quiet operation
|
|
A complete mobile AC/DC power solution designed to be recharged via solar panels with in-built MPPT charging circuit. |
![M8197 Portable Power Generator 6Ah/80W](https://images.altronics.com.au/thb/m/M8197.jpg) |
M8197
|
|
- Lightweight and Portable
- 24000mAh lithium-ion battery (equivalent to 6Ah @ 14.8V)
- Up to 80W AC continuous output, 120W for peak output
- 18W Type USB C
- 18W QC3.0 Type USB A
- Supports AC Modified SineWave output
- Multiple DC outputs, Total Up to 150W Peak power output
- Built-in ultra bright LED flashlight/blink
- Built-in LED Light Panel for illumination
- Protection including: Short circuit, Overload, Over temperature proof
|
|
A complete mobile AC power solution designed to be recharged via solar panels with in-built MPPT charging circuit. |
![N2026A 12/24V MPPT Solar Charge Controller 40A](https://images.altronics.com.au/thb/n/N2026A.jpg) |
N2026A |
|
- Advanced MPPT technology
- Multi-chemistry design suits Sealed, Gel, Flooded Lead, Acid, LiFePO4, Li(NiCoMn)O2 type batteries
- Super fast tracking speed whilst ensuring efficiency
- Accurate Identification
- Reliable maximum input power
- 12/24V automatic voltage identification
- LCD display screen
- Various load controls
- Battery temperature compensation
- Power statistics recording function
- Supports PC monitor, external display unit and other peripherals, real-time date view and parameter setting function
- Suits lead acid, gel type and lithium chemistry batteries
|
|
This dual input design connects to a solar panel and your cars alternator (12 or 24V) to provide 3 stage charging for secondary batteries such as those used in campers, caravans and trades service vans/trailers. It is compatible with the latest smart alternators and start/stop systems found in modern vehicles. |
![T5099 DC Power Control Box](https://images.altronics.com.au/thb/t/T5099.jpg) |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
![L1045 100A DC Power Shunt Box With Panel Meter](https://images.altronics.com.au/thb/l/L1045.jpg) |
L1045 |
|
- Rugged aluminium diecast shunt casing.
- Easy to connect via screw terminals and heavy duty binding posts.
- Shunt is a universal design which can be used with other types/brands of panel meters.
- Mounting flanges on case allow it to be secured to any surface.
|
|
A 100A shunt box designed for use in high current remote power, off-grid and PV backup systems. Rated up to 100A it provides connections between the batteries and the load using screw terminals and heavy duty binding posts. Maximum voltage 16V (ie: suits 12V battery systems only). Dimensions: 125W x 62H x 82Dmm. |
![N0080G 80W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0080G.jpg) |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
![N2024A 12/24V MPPT Solar Charge Controller 20A](https://images.altronics.com.au/thb/n/N2024A.jpg) |
N2024A |
|
- Advanced MPPT technology
- Multi-chemistry design suits Sealed, Gel, Flooded Lead, Acid, LiFePO4, Li(NiCoMn)O2 type batteries
- Super fast tracking speed whilst ensuring efficiency
- Accurate Identification
- Reliable maximum input power
- 12/24V automatic voltage identification
- LCD display screen
- Various load controls
- Temperature sensor
- Suits lead acid, gel type and lithium chemistry batteries
|
|
This dual input design connects to a solar panel and your cars alternator (12 or 24V) to provide 3 stage charging for secondary batteries such as those used in campers, caravans and trades service vans/trailers. It is compatible with the latest smart alternators and start/stop systems found in modern vehicles. |
![Q0596 Flush Mount 350A Coulometer With Shunt](https://images.altronics.com.au/thb/q/Q0596.jpg) |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
![S2694 Power Hub and Battery Isolator Switch](https://images.altronics.com.au/thb/s/S2694.jpg) |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
![N0065G 65W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0065F.jpg) |
N0065G |
|
- Maximum power: 65W
- Nominal voltage: 12V
- Short circuit current (ISC): 3.9A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 3.72A
- Maximum power voltage: 17.5V
- Connection: MC-4 Plug
- Dimensions: 664 x 664 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This 65 Watt model is an excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RVs, caravans, boats etc. |
![S2682 Dual Battery Isolator Kit](https://images.altronics.com.au/thb/s/S2682.jpg) |
S2682 |
|
- Emergency override feature
- LED status indicator
- Suitable for 12VDC Marine, 4WD, caravan and solar applications
|
|
This dual battery isolator kit allows you to charge two batteries at the same time from your engine alternator. The isolator kit will begin charging the second battery simultaneously when the start battery is sufficiently charged whilst engine is on.
|
![N2012 20A 12V/24V DC PWM Solar Charge Controller](https://images.altronics.com.au/thb/n/N2012.jpg) |
N2012 |
|
- Suits lead acid or gel battery systems
- Automatic fuse protection
- Battery overload & deep discharge protection
- Automatic 12/24V voltage selection
- Reverse polarity protection
- Short circuit protection
- Status LEDs
- Diode protection
|
|
A basic solar charge controller for permanent installations of lead acid or gel battery solar panel systems. It features a 3 stage charging sequence (boost, float and equalise). LEDs are provided to indicate working status - normal, fault, overload and low battery. Suitable for 12V or 24V systems, the charger automatically detects the connected b |
![N2080 Digital DC Power Meter](https://images.altronics.com.au/thb/n/N2080.jpg) |
N2080 |
|
- Measurement parameters
- Current range: 0-20A continuous or 30A Peak for 30min.
- Voltage range: 5-60V or 0-60V with external DC source
- Resolution: 0.01V, 0.01A
- Scrolling display of parameters
- Ampere hour (AH): Max recorded AH: 99,999AH
- Resolution of AH: 0.01AH for a total recorded AH <1000AH
- 0.1AH for total recorded AH between 1000AH and 10,000AH
- 1AH for total recorded AH >10,000AH
- Power Watt (Wp): 0-3600W, 0.1W resolution
- Energy kilowatt Hour (KWH): 0-9999.9KWH, 0.1WH resolution
- Accumulative Max. Operation period logged: 75Hrs
- Operation voltage and current: 5-60V, 12mA
|
|
Designed to work in conjunction with the N 2081 data collection unit as part of a solar charging monitoring system.
The 2 x 16 character dot matrix LCD display gives constant real-time display of voltage, current and power.
Up to 1500 sets of data can b |
![N2098 Dual Battery Monitor/Meter](https://images.altronics.com.au/thb/n/N2098.jpg) |
N2098 |
|
|
|
Don't be caught under or overcharging your dual battery setup with this handy LCD monitor. |
![N0040F 40W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0040F.jpg) |
N0040F |
|
- Maximum power: 40W
- Nominal voltage: 12V
- Short circuit current (ISC): 2.50A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 2.33A
- Maximum power voltage: 17.2V
- Connection: MC-4 Plug (1m lead)
- Dimensions: 664 x 408 x 25 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 40W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
![Q0594 Flush Mount 50A Coulometer With Shunt](https://images.altronics.com.au/thb/q/Q0594.jpg) |
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
![M8070A 150W 12V DC To 240V AC Modified Sinewave 'Can' Inverter](https://images.altronics.com.au/thb/m/M8070A.jpg) |
M8070A |
|
- Output power: 150W
- Surge power: 450W
- Output voltage: 230V AC @ 50Hz
- Output wave form: Modified sine wave
- DC input voltage: 12V DC nominal
- Efficiency (typical): 90%
- No-load current draw: <0.5A
- Low battery shutdown: 10 ± 0.5V
- High battery shutdown: 15.5 ± 0.5V
- Alarm & thermal shutdown: 60 ± 0.5°C
- Short circuit protection: Yes
- Dimensions (mm): 135L x 60W x 60H
- Net weight: 0.4kg
|
|
Designed in the shape of a soft drink can, this compact inverter mounts snugly in your vehicle's cup/drink holder. |
![N0020F 20W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0020F.jpg) |
N0020F |
|
- Maximum power: 20W
- Nominal voltage: 12V
- Short circuit current (ISC): 1.25A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 1.16A
- Maximum power voltage: 17.2V
- Connection: 0.5m bare end fly lead
- Dimensions: 410 x 351 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 20W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
![M8636A In-Line Solar Panel/Battery Watt Meter](https://images.altronics.com.au/thb/m/M8636A.jpg) |
M8636A |
|
- Operates 8-60V DC
- Ideal for 12V or 24V DC electrical systems
- Displays volts, amps, watts and average watts
- Backlit LCD Screen
- Anderson style connectors for easy connection
- Use with fridges, solar panels, dual battery systems and battery packs.
|
|
The perfect solution for measuring input and output currents and wattage from solar panels or batteries. |
![N0700A 5W 12V Solar Battery Charger](https://images.altronics.com.au/thb/n/N0700A.jpg) |
N0700A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |