|
Description |
Downloads |
Specs |
Ordering |
|
![P1024 Alligator to Pin Jumper Leads](https://images.altronics.com.au/thb/p/P1024.jpg) |
P1024 |
|
|
|
Handy test leads. Pack of 6.
Contains: one of each; green, yellow, red, white, black and blue
Length: 210mm |
![P1024A Alligator / Croc Clip to Pin jumper leads](https://images.altronics.com.au/thb/p/P1024A.jpg) |
P1024A NEW
|
|
|
|
Handy test leads. Pack of 10. Contains: two of each yellow, red, white, black and blue |
![Q0207 12MHz Dual Channel PC Oscilloscope Signal Generator](https://images.altronics.com.au/thb/q/Q0207.jpg) |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
![Q0965A High Current AC/DC Clamp Meter 800A](https://images.altronics.com.au/thb/q/Q0965A.jpg) |
Q0965A |
|
- 800A AC/DC range
- 10mA resolution
- Backlit LCD
- 28mm clamp opening
- Auto power off
- 6000 count LCD readout
- Data hold and relative functions
- Test leads, temperature probe and carry case included
- 2 x AAA battery included
- Cat II 600V, Cat III 300V
|
|
A clamp meter offering the flexibility of measuring AC and DC currents up to 800A. Simply clamp the jaws around the conductor and the display reads the DC or AC current present. It can test DC Volts, AC Volts, DC Amps, AC Amps, resistance, capacitance, frequency, temperature, temperature and continuity. |
![Q1068A Autoranging True RMS Digital Multimeter](https://images.altronics.com.au/thb/q/Q1068A.jpg) |
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
![Q1089 Autoranging True RMS Digital Multimeter with NCV](https://images.altronics.com.au/thb/q/Q1089.jpg) |
Q1089 NEW
|
|
- True RMS Auto Range.
- Large easy to read reverse backlit screen.
- Simple push button operation.
- Large multifunction display.
- Indicates correct connection jacks.
|
|
This compact true RMS digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
![Q1133A Auto Ranging Digital Multimeter](https://images.altronics.com.au/thb/q/Q1133A.jpg) |
Q1133A |
|
- Manual override of auto-ranging
- Range hold & data hold
- Auto power off
- Temperature measurement sensor included)
- Continuity buzzer
- Diode tester
- Frequency 1Hz - 30MHz
- Battery included
- CMOS and TTL logic testing
- Cat II 1000V
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
![Q1133B Auto Ranging Digital Multimeter](https://images.altronics.com.au/thb/q/Q1133B.jpg) |
Q1133B NEW
|
|
- Streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti-interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- CMOS, TTL logic test; True RMS, NCV, MAX/MIN tests
- Relative value measurement, frequency/ duty cycle test, data hold
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
![Q1300 Wireless Tyre Pressure Sensor Monitor System](https://images.altronics.com.au/thb/q/Q1300.jpg) |
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
![Q1340A Professional Cable Tracer & PoE LAN Cable Tester](https://images.altronics.com.au/thb/q/Q1340A.jpg) |
Q1340A |
|
- Transmitter
- Tone frequency: 130KHz
- Max. distance of transmission: 3km
- Max. distance of cable map: 300m
- Max. working current: ≦70mA
- Tone mode: Single tone
- Compatible connectors: For RJ45(8 pin)/RJ11(6 pin) cable map test. RJ45 SCAN socket : for RJ45 locating individual wire pairs RJ11 SCAN socket: for RJ11 locating individual wire pairs
- Cable types: RJ45 Lan cable Cat 5, 5e, 6(UTP/ STP), RJ11/12 telephone cable Cat 3 (6P/2C/4C/6C)
- Function selection: 5 Press button switch (POWER、SCAN/PoE. SCAN,TEST/FAST TEST、Ω,POL/TEL)
- Continuity test: 1 LED (≦300Ω), Coaxial cable & normal solid/Stranded wire by alligator clips patch cord.
- Max. signal voltage: 8Vp-p
- Cable map indication: 8 LEDs, Fast/Slow dual speed
- Shielded indication: 1 LED
- Telephone line polarity, status indication: 1 Dual color LED
- Live telecommunication equipment test and router test: Yes
- Voltage protection: DC 48V
- Auto power off: 1 hour
- Low battery display: 6.5V (Power LED flashes)
- Battery type DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pce)
- Dimension: 138L×80W×35D mm
- Weight: 140g
- Receiver
- Frequency: 130KHz
- The Max. working current: ≦115mA
- Compatible connectors: RJ45(8 pin)/RJ11(6 pin)
- Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
- Earphone jack: 1
- Signal status indication: 1 dual colour LED & Buzzer
- Cable map indication: 8 LEDs
- Shielded indication: 1 LED
- NCV indication; 1 LED (AC90~1000V,≥50mm,≤100mm)
- LED illumination: 1 LED
- Power indication: 1 LED
- Battery type: DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pcs)
- Dimension: 203L×50W×32D mm
- Weight: 95g
- Accessories: RJ45 cable patch cords, RJ11 cable patch cords, RJ11 to alligator clips patch cord,
- earphone, storage bag, user manual
|
|
This Noise-Filtering Network PoE Toner & Probe
allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
![Q2120 Digital Battery Analyser](https://images.altronics.com.au/thb/q/Q2120.jpg) |
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
![T2261 600g Digital Pocket Scales](https://images.altronics.com.au/thb/t/T2261.jpg) |
T2261 |
|
- Zero/Tare function
- 4 unit counting modes
- 600 gram load capacity
- 0.01g resolution
- Measures in grams, avoirdupois ounces, troy ounces & pennyweight
- Auto power off
- Includes pleather pouch & hard plastic protective cover
|
|
These compact scales provide a quick and easy way of accurately weighing anything up to 600gm. Sized at just 120mm long, the unit fits right in your pocket. Housed in a protective plastic cover. |
![T2266 50kg Handheld Luggage Scales](https://images.altronics.com.au/thb/t/T2266.jpg) |
T2266 NEW
|
|
|
|
Ideal for avoiding any nasty surprises at the airport before your next holiday. |
![X7015 EasyBBQ Dual Probe Bluetooth Barbecue Thermometer](https://images.altronics.com.au/thb/x/X7015.jpg) |
X7015 |
|
- Two channel wireless
- Bluetooth range up to 50m
- Food grade stainless steel probes
- 0-300°C range (±1°C)
- Android & iOS app compatible
- Works in Ovens and BBQs
|
|
The EasyBBQ is a dual probe thermometer with Bluetooth connection to your smartphone. Includes 2 probes with stainless steel mesh cables. Android or iOS, plus monitoring on the backlit LCD. 0-300°C range. Requires 2xAAA batteries. |
![X7063 Wireless Wi-Fi Home Weather Station](https://images.altronics.com.au/thb/x/X7063.jpg) |
X7063 |
|
- Perpetual Calendar up to Year 2099
- Automatic calibration of network time service
- Day of week available to be selected in 8 languages
- Able to be used as an alarm with two daily alarms optional
- Automatic snooze function (OFF or 5~60min)
- Records temperature, humidity, wind speed and rainfall
- Display of ‘feels like temperature’, wind chill temperature, heat index, dew point temperature
- Future weather forecast and forecast temperature function
- Connects directly to Wi-Fi network
- Adjustable backlight (3 Levels) - when station is plugged in through USB output
|
|
This fantastic wireless Wi-Fi home weather station contains everything you require to monitor live weather conditions at home. The main base station displays at a glance, indoor and outdoor temperature, humidity, barometric pressure, recent rainfall, wind speed and direction. |