|
Description |
Downloads |
Specs |
Ordering |
|
 |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
 |
K8604 |
|
- CNC Cutting
- 3D Printing
- Laser Engraving
- Fast Assembly
- Industrial-level aluminium frame stablity
- Machine head is easily changeable
- Full belt drive for higher quality models
- V-Slot profile and pulley for stable and smooth running low noise, wear resitance and long life
- Resume Printing
- High power motor
- Neat and clean design
- UI interface
- Easy leveling nut
|
|
With the Creality CP-01 3 in 1 Desktop Laser Engraver / CNC / 3D Printer you can add 3D printing, Laser Engraving and CNC Cutting to your workbench to produce working prototypes. |
 |
SL4580W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 25kg. |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
M8067 |
|
- Galvanic isolation between AC and DC for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
K8606 |
|
- 300x300x400mm build volume
- Dual port hot end cooling fans
- Meanwell 350W power supply
- All-metal frame
- Ultra Quiet TMC2208 Motherboard
- Resume printing function
- Filament breakage sensor
- Firm triangular structure
- High standard V-shaped profile
- All-metal hot end
- Easy assembly
- UI navigation screen
- SD card slot
|
|
With the Creality CR-10 V2 Desktop 3D Printer you can add 3D printing to your workbench to produce working prototypes. |
|
SL4576W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 20kg. |
 |
S9907D |
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
- Includes cameras, digital video recorder, connection leads & power supplies.
- Easily installs in just a few hours.
- Ideal for home or office.
- Suitable for DIY.
- Just add a hard drive and plug it in!
|
|
This package is a total home or small business solution as it contains 4 5MP bullet cameras and 4 5MP dome camera to suit a variety of needs and spaces. Cameras plus a surveillance DVR with 5MP recording and more. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
K8602 |
|
- Dual Y-axis motion control system drives the high-quality stable output of the two-sided timing belt, effectively avoiding the shock caused by printing.
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method
- Industrial circuit board
- 220 x 220 x 300 build volume
- FDM Moulding technology
|
|
With the Creality Ender-5 Pro Desktop 3D Printer you can add 3D printing to your workbench to produce working prototypes. |
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
SL4576B
|
|
|
|
This 12.8V 100Ah lithium battery (LiFePO4) is compatible in size with traditional 90-100Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
M8066 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
S5276A |
|
- 8 alarm zones
- Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
- 56 user codes can be programmed to operate by keypad PIN, radio key or access card.
- Optional Ness Radio Interface for fully integrated wireless security.
- Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
- Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
- 3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
- Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter.
- Home Mode allows partial arming, (eg, perimeter security overnight).
- Day Mode feature allows daytime monitoring of fire doors, coolrooms etc.
- Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
- Keypad Panic and Duress feature.
- Two button arming feature.
- Fire Alarm feature with different siren tones.
- Highly flexible zone to output mapping.
- Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Nessensor™ vibration sensors.
- Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
- Siren chirp and strobe flash on arming with radio key.
- Quiet chirps option on arm/disarm by radio key.
- True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
- 4 programmable auxiliary outputs (Up to 8 Aux outputs optional).
- Optional output expander.
- Enhanced serial data input/output via RS232.
- Automatic reset fuses.
- Programmable Reset Output lockout.
- 30 event memory from KPX and Saturn keypads. 80 event memory can be accessed using Navigator keypad or NessComms™.
- Standard defaults to suit most applications.
- Easy programming by keypad or NessComms™ software by direct connect.
- All programming data is permanently stored in a non-volatile memory.
- All inputs and outputs are heavily protected against lightning and high voltage supply transients.
- High efficiency DC power supply with dual 17VAC/20VDC power input
|
|
This 8 Zone Alarm Panel features flexible 8 Zone control panel & 4G Cellular communicator. Supplied with 4G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.
|
 |
S9369 |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 25 channels up to 5MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 16 x 15.4W PoE network interfaces
- Four internal SATA interface, max 32TB
- Remote control & mouse
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.4 support
|
|
This multi channel network video recorder offers 5MP resolution recording at 25fps for up to 25 cameras (or 12ch of 4K @ 25fps). For ease of installation, 16 dedicated PoE ports are in-built. It utilises H.264/H.265+ compression to maximise your hard disk space and has wide camera compatibility with ONVIF 2.4 support. |
 |
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
 |
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
K8640 |
|
- Build volume up to 130 x 82 x 160mm
- Fast layer speed with each layer taking between 1 and 4 seconds.
- UV integrated light source
- 1620 x 2560 resolution
- Precision up to 51μm
- LCD HD screen
- Z-Axis linear rail for better stability
- Air filtration system
- Manual levelling system
- 3.5 inch full colour touch screen
|
|
Resin based 3D printers are rapidly becoming the go to tool for high resolution 3D prints. They offer a faster print process with excellent accuracy and a stronger finished product thanks to UV curing on each layer. |
 |
M8065 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
S9349K |
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 8MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 16CH HD or 32CH IP Camera Input
- Support 2 SATA up to 16TB Capacity
|
|
This 16 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). Each channel can be individually recorded in real time 25fps @ 1080p to the internal SATA hard drive (available separately). Or 8fps @ 8MP (2592×1944px) resolution on all 16 channels. |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
A31489 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. Includes transmitter and receiver. |
 |
A5332 |
|
- Input impedance: 20KΩ (bal.)
- Maximum input level: ≥16dB
- Connections: Balanced XLR, 6.35mm jack
- Output impedance: 100Ω
- Maximum output level: ≥15dB
- Equaliser control 31 band (1/3 octave)
- High pass filter: 40Hz 12dB/octave
- Feedback threshold LED: ≥-22dB
- Peak sensitivity: Lit 3dB before clip point
- Frequency response: 20Hz - 20KHz (±0.5dB)
- THD + S/N %: <0.1% (20Hz - 20KHz @ 0dB)
- S/N ratio: ≥90dB
- Power supply: 240VAC
- Dimensions: ≈482W x 230D x 132Hmm
- Weight: 5.4kg
|
|
This professional unit delivers outstanding equalisation both in live or studio applications. Invaluable
for counteracting poor room or venue acoustics. The design employs ultra low noise audio amplifiers
with high quality components for outstanding sou |
 |
C8847 |
|
- Connector types: BNC, jack
- impedance: 50 Ω
- Power requirements: 10 to 15 volts DC offset from the coaxial connection, 50 mA
- Receiving mode (3 dB beamwidth) : 70 Angle
- Third-order overload pay cut point (OIP3) : > 30 dBm
- Antenna gain (axis) : 5.8 class: : dBi
- The signal gain + 10 dB (plus or minus 2 dB) :
- Size: 283 mm x 270 mm x 25 mm (height x width x depth)
- Mounting: 5/8" mini microphone type thread
|
|
A wideband 500 to 950MHz frequency antenna for improving transmission quality and range. It is ideal for
installations using wireless mics, tour guide systems or in ear monitoring over long distances. Suitable for stand
mounting, the antenna may also be suspended from the ceiling or wall mounted using the optional C 8848
bracket. C 8847 includes |
 |
SL4566B |
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
C0998B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
P7446 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Long term bending radius ≈20mm
- Includes plug protector for cable pulling through conduits/cavities.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
AOC (active optical cable) and HDMI technology supporting 4K @ 60Hz resolutions at lengths up to 100m. |
 |
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
 |
D4360 |
|
- Compact, cost-effective and powerful industrial LTE router for professional applications
- Support LTE Cat 4 up to 150 Mbps
- Automatic switch to available backup connection
- Wireless Access Point with Hotspot functionality
- Teltonika Remote Management System compatible
- Digital Input/Output for remote monitoring and control
- Compact size, easy integration
- Worldwide support
|
|
This router is ideal for people who would like to share their internet on the go, as it is not restricted by a cumbersome cable connection. Unrestricted, but not forgotten: the router still supports internet distribution via a broadband cable, simply plug it in to the wan port, set the router to a correct mode and you are ready to browse.
|
 |
S9367D |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
 |
S9380A |
|
- Installations of CCTV systems can vary greatly in configuration and technical complexity. We recommend that unless you have skills in computer networking that you engage a CCTV installer or professional to set up your installation. The process can involve opening router ports, setting up IP routes etc which can be daunting for a beginner. Every installation is different, as a result, it can be difficult to diagnose set up issues over the phone or via email.
|
|
This compact DVR can achieve up to 25x 12MP channels at 25fps or 36x 5MP channels at 25fps! Suitable for use with an external dedicated PoE switch (see below) it offers high resolution surveillance solution for installations requiring a large number of cameras. |
 |
M8064 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
K8600 |
|
- V-slot pulley design for reduced noise during operation
- Creality have sold of 800,000 Ender 3's worldwide!
- Built-in motherboard power supply
- Resume printing function
- Simple levelling method with thumbscrews
- 220 x 220 x 250 build volume
- FDM Moulding technology
|
|
The Creality Ender 3 is one of the worlds best selling desktop 3D printers. Creality have developed the Ender 3 with a community of users and contributors to achieve the best possible print performance for its price. |
 |
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
P7465 |
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
 |
C5220 |
|
- Rated power: 150W @ 4Ω
- SPL 1W @ 1m:86dB
- Max SPL:108dB
- Freq response:50Hz - 300Hz
- Weight: 12kg
- Dimensions (mm): 310H x 420Ømm
|
|
You may locate C 5220 anywhere you can run speaker wire. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
S9379 |
|
- HD Video Recording
- HD real-time recording brings users clear images while video recording and playback
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- Multi-platform Remote Access
- Fully compatible with iPhone & iPad, and Internet Explorer on Windows operating system
- AVTECH free CMS program on both Windows and MAC OS
- Powerful Storage Capacity
- Support up to 3 hard disks for long-term recording and saving large amount of recording data.
- Smart Recording
- High video resolution switch for events to optimize the recording efficiency of the hard disk.
- External Disk Array Support for More Video Storage
- eSATA interface built-in to connect a disk array (up to 4-bay disk array with RAID 0 and 1) for more video storage.
- Full HD HDMI Video Output
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- RS485 Communication
- Capable of external device connection to extend the functionality and flexibility of your NVR.
|
|
These network video recorders are designed to capture streams from up to 25 IP cameras with event notification via a remote monitoring app for Android or iOS devices. |
 |
P7439A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
S9445 |
|
- 4K Ultra Full HD video
- 30MP still shot capability
- Internal battery pack with solar recharging
- Adjustable triggering, intervals and duration.
- Loop recording
- Large aperture lens
- WiFi connectivity
- 30MP clear night and day imaging
- IP66 rated
- 18 month indoor standby time
- Bluetooth 5.0 with low power consumption
- Full automatic IR filter
- Built-in microphone & speaker
- Moon phase/temperature/time/date stamp functions
|
|
This 4k solar powered Wi-Fi trail camera is a wildlife and surveillance camera with a 3 zone infrared sensor. |
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
T2065 |
|
- What makes a desoldering station such a vital workbench tool?
- Recycle: It’s a satisfying experience to recover useful parts from old and broken boards. A desoldering station is particularly useful for salvaging hard to find or expensive components.
- Speed: Manual desoldering with braid or handheld pumps is a finicky slow process. A vacuum desoldering unit turns it into a single handed job, melting and sucking the solder at the same time.
- Fix: Soldered in a capacitor the wrong way around? No problem! Quickly fix assembly mistakes with minimum of fuss. Great for schools, engineering labs and soldering workshops.
|
|
This compact desktop vacuum desoldering unit provides hobbyists and professionals the ability to remove componentry quickly and without damage.
|
 |
M8057 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 1500W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
C0993 |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
- Built-in MP3 player with USB and SD card inputs
|
|
Instant, powerful PA sound! An all in one portable PA sound system with amplifier that sets up in just seconds - no expertise required. Just plug into 240V power, switch it on and connect a mic. USB playback makes it easy to play your favourite tunes. Great for clubs, sports events, fetes, carnivals and bingo nights - any crowd up to 500 people! |
 |
M8185 |
|
- Nominal Input Power @ 240V AC: 250W
- Nominal Input Current: 1.12A
- Circuit Breaker Current: 2.0A
- Output Voltage: 120V
- Output Current: 2.1A
- Output Power: 250VA
- Dimensions: 133W x 81D x 98H mm
- Weight: 3.2Kg
|
|
M8185 250W model. Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary rating: 120V 2.1A Max |
 |
A4125 |
|
- HDMI over 2-conductor cable (Such as Twisted cable, telephone cable, Cat5e/6/7 cable etc)
- With 1x Loop HDMI output at transmitter
- Transmission more than 3800m
- Support Multi-level cascading
- HDMI Resolution up to 1080p
- HDCP compliant
- IR pass-through control
- Includes power supply
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
P7439 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
M8062 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
S5288B |
|
- Plug-and-go operation - no programming required
- Alarm Panel Compatibility Compatible with all Ness PSTN alarm diallers in Contact ID DTMF and Voice formats
- Antenna with magnetic base supplied - long cable allows the unit to be installed in a secure housing
- Compatible with all Ness PSTN control panels and most third party panels
- LCD status display
- 12V Plug pack powered (included)
- On board battery backup
|
|
With this NESS 3G/4G Dialler you no longer need to worry about the absence of PSTN phone lines with the NBN roll out. The Ness 4G Dialler provides a 3G or 4G pathway for alarm diallers to communicate in the absence of a land line. |
 |
A1039 |
|
- Infra-red hub
- Power supply
- Infra-red target (receiver)
- Two dual eye infra-red emitters
|
|
This system incorporates a plasma friendly target, junction box and power supply. It controls four AV devices remotely via the included dual eye infra-red emitters. |
 |
N1130F |
|
- High quality 130W mono-crystalline solar panel
- Portable camping power ensuring your batteries don't run flat
- Great for campers and caravan owners running a fridge or lighting from their vehicle batteries.
- 12V/10A regulator with USB output
- 5m cable with alligator clips
- Carry bag included
- 5 year workmanship warranty
- 25 year output warranty
|
|
Portable folding solar panel system (130W mono-crystalline type) for camping and caravans. This kit provides quick site power for your batteries ensuring your camping fridge is always on the go without the danger of your batteries running flat. It features a high performance weatherproof solar regulator with 3-stage battery charging circuit. |
|
P7436 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve.
|
 |
C0871 |
|
- Impedance: 8Ω
- Power Input: 35W RMS, 80W Max
- SPL (1W @ 1m): 90dB,
- Frequency Response: 50Hz - 20kHz
- Qts: 0.64
- Vas: 15.98 cu ft (Infinite Baffle)
- Crossover Frequency: 2.5kHz
- Weight: 1.6kg each
- Mounting Hole Size: 275 x 190mm
- Dimensions: 304L x 223W x 88Hmm
|
|
An outstanding choice for use in in-wall or ceiling applications such as home theatre or reticulated music systems. Features excellent hi-fi reproduction and high power handling capability.
Designed to be installed into ceilings or walls, this low prof |
 |
C5160
|
|
- User Friendly: Simple plug and play interface
- Bluetooth: Stream audio wirelessly from any bluetooth enabled device
- Power Source: Large 39.96Wh internal battery for long play times (6 to 8 hours at 80% volume)
- TWS: True wireless stereo pairing synchronize two speakers together to play the same music
- USB Port & Micro SD Card Slot: Access music stored on memory devices
- FM Radio: Digital FM tuner with auto scan
- Digital Recorder: Record music and spoken word applications directly onto your flash drive
- Wireless Microphone: Included in box, features volume & echo controls
- Mic Inputs: Microphone input with independent volume and echo controls
- Volume Control: Independant master volume, bass & treble controls
- AUX Input: Plug and play smart phones, tablets & MP3 players
- Party Lights: Exciting lighting effect with multiple colours
|
|
This Bluetooth party speaker and wireless mic PA system has been designed for outdoor or indoor entertaining with colour LED lighting for added party atmosphere. |
 |
X0660 |
|
- IP67 waterproof (1 meter depth for 30 minutes)
- Float and flash
- Vibration water draining function
- Dual/tri-watch
- 5/1 watt switchable
- Large backlit display
- Programmable and priority scan
- Keypad lock
- Battery indicator
- Operating time up to 8hrs
|
|
An essential part of your safety kit the MX500 is a high performance radio, built tough to withstand the harshest marine environments. It is waterproof to IP67 if dropped overboard. It will not only float, but the radio will flash ensuring easy retrieval. |
 |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
T2651 |
|
- We recommend the use of high quality Iroda butane gas for use in all Iroda gas powered products. Inferior or lower grade butane may contain a higher level of impurities which will block the internal microscopic filters faster causing intermittent or complete failure.
|
|
The T 2651 kit comprises the T 2650 IRODA Gas Soldering Gun supplied in a sturdy carry case with a range of tips, spare butane cartridges, solder sucker, tip sponge and a range of handy tools. |
 |
X0575 |
|
- 5/1 watt RF power Heavy duty
- Die cast metal chassis
- Fast charger POD supplied with 240v and 12v adaptors
- 3 Programmable instant channel buttons
- 80 Narrowband channels*
- 38 CTCSS & 104 DCS Privacy codes
- Duplex
- Rugged construction
- Channel scan (instant/memory/priority)
- Backlit LCD display
- Rotary volume control
- Signal monitoring
- Keypad lock
- Calling tone
- Power save mode
- Removable flexible antenna
- 2.5mm jack for optional headset or speaker mic
|
|
This quality unit has all the features you would expect to find in a modern UHF transceiver all housed in a rocksolid diecast chassis.
Includes charging pod, mains adaptor and high capacity 1800mAH lithium battery. |
|
P7434 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7434A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
 |
S9845B |
|
- 4 x 18650 replaceable batteries with 5W solar panel recharging
- Includes wall mount bracket
- LED floodlight on motion detect (selectable)
- Two way audio (mic & speaker in-built)
- 3.6mm (120°) lens with digital zoom
- Day/night mode with IR LEDs
- 1080p recording
- Motion detect with push notifications to iOS/Android
- SD card slot (up to 64GB)
- Compatible with 2.4GHz Wi-Fi
|
|
This 1080p wireless 2MP camera is ideal for use in situations where cabling for power and video are impractical. It provides superb clarity for both day and night use and can be configured to automatically record when motion is detected. |
 |
S9810 |
|
- H.264, H.265+, JPEG, MJPEG compression
- 5 megapixel @ 20fps
- Offers night time colour video
- Ideal for domestic installations
- In-built LED security light
- Motion detect flashing mode
- Up to 30m night time illumination
- Metal housing
- 2.8mm lens
- Simultaneous multiple streams
- Supports ONVIF
- SD card slot
- PoE receiver
|
|
A new series of camera designed to provide full colour video day and night. The camera has a security light in-built which allows the high sensitivity sensor to reproduce colour night time imaging compared with traditional day/night cameras which only display B&W when IR is activated. Light can also flash upon detection to deter intruders. |
 |
A4126 |
|
- Support Audio Format: LPCM audio format
- Transmission Distance: 3800m 2-Conductor cable (Recommend to use 12AWG-19AWG cable)
- Supported Video Format:
- DTV/HDTV:480i/ 480P/576i/576P/720P/1080i/1080P
- VESA: 800x600, 1024x768, 1280x768,1280x960,1280x1024, 1680x1050,1920x1080, 1280x720, 1360x768,1400x1050,1280x1024.
- Connector on Receiver:
- 1x Red Terminal Post, 1x Black Terminal Post
- 1x HDMI Output, 3.5mm
- 1x 3.5mm jack for IR-RX
- DC 5.5 x2.1mm Jack
- Power consumption: 5.5watts(Maximum)
- Dimension: 206Lx110Wx33Hmm
- IR frequency: 38K-56KHZ
- Weight: 548g
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
S5377 |
|
- Weather resistant design (IP54)
- Vandal resistant
- Compatible with 125KHz 64-bit EM cards & key fobs
- Built-in logics for stand alone, split-decoded and multi-station operations
- Controls “Going In” with user codes/cards
- “Going Out” with feature programmable egress button
- Door Bell for guests/service persons /tradesmen
- Stainless steel faceplate
|
|
This weatherproof vandal resistant door keypad controller is designed for controlling a door strike in home or business security installations. It combines a digital keypad and proximity EM card reader in one unit. |
 |
M8056 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 1000W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
C0903 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications, such as theatre surround or bookshelf speakers, and PA sound reinforcement. |
 |
C0902 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These high power Redback Bookshelf Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connect |
 |
A1041 |
|
- Target Junction Box
- LCD Friendly Target
|
|
This suite of resi-linx® infra red (IR) products allows remote control of your AV equipment from anywhere in the house.
|
 |
Z6451 |
|
- Assembly manual included, plus YouTube tutorials available
- Includes all motors, Arduino board, components, wiring, chassis and tracks
- Bluetooth controllable from a smartphone
- Fully customisable
- Requires 2 x 14500 batteries
|
|
This smart car kit uses the power of Arduino to provide a customisable line tracking and obstacle avoidance robot which can be modified, tweaked and upgraded. It features 4 wheels with acrylic
base. The IR and line tracking sensors keep the robot from bumping
into anything, whilst on board bluetooth allows control from your
smartphone. |
 |
D2363A |
|
- USB C Power Delivery input (60W).
- Gigabit wired ethernet connection RJ45.
- 3 x USB 3.0 Type A connections.
- USB 3.0 Type C connection.
- Micro and full size SD card reader slots.
- VGA video output.
- DisplayPort 1.2 video output.
- HDMI output 4K @ 30Hz.
- 3.5mm microphone input and headphone output.
- Aluminium housing.
- 40cm USB C connection cable.
|
|
A handy USB C type laptop docking station hub with all the connections you need for working from home. A must have for anyone using their work laptop with a monitor at home or for families with a single desk for multiple laptops. |
 |
S9843B |
|
- 2 x 18650 replaceable batteries
- Ultra low power design
- Two way audio
- 166° wide angle lens
- iOS/Android Tuya SmartLife monitoring app
- 2.4GHz Wi-Fi connection
- Day/night mode with IR LEDs
- 1080p footage recording
- PIR motion detection
- Magnetic & screw mount bases included
- SD card slot
|
|
An instant security camera, anywhere you need it. Powered by an internal lithium battery pack, this camera provides 4-6 months of CCTV recording in 1080p resolution. |
 |
S9845A |
|
- 2 x 18650 replaceable batteries with solar panel recharging
- Includes wall mount bracket
- Two way audio (mic & speaker in-built)
- 3.6mm (90°) lens with digital zoom
- Day/night mode with IR LEDs
- 1080p recording
- Motion detect with push notifications to iOS/Android
- Micro SD card slot (up to 32GB)
- Compatible with 2.4GHz Wi-Fi
|
|
This 1080p wireless 2MP camera is ideal for use in situations where cabling for power and video are impractical. It provides superb clarity for both day and night use and can be configured to automatically record when motion is detected. Motion events can send push notifications to your phone. |
 |
M8194A NEW
|
|
- Compact design with 20000mAh (74Wh) internal battery pack
- 2 hour recharge
- Includes all neccessary adaptors, housed in a compact carry case with jumpstarter so users have everything they need on the go
- 1x USB Type-A USB Output
- 1x USB Type-C USB Input/Output
- 1W LED torch
- Includes two DC outputs with cigarette lighter socket lead (1x lead included) for powering car fridge, lighting, and other car accessories.
- Starts typical 4, 6 & 8 cylinder engines (inc diesels).
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles. The 20000mAh rating provides up to 1000A peak output when cranking. 60W USB C power delivery charging in built. |
 |
S9810A |
|
- H.264, H.265+, JPEG, AVI compression
- 5 megapixel @ 30fps
- Offers night time colour video
- Ideal for domestic installations
- In-built LED security light
- Motion detect flashing mode
- Up to 30m night time illumination
- Metal housing
- 2.8mm lens
- Simultaneous multiple streams
- Supports ONVIF
- SD card slot
- PoE receiver
|
|
A new series of camera designed to provide full colour video day and night. The camera has a security light in-built which allows the high sensitivity sensor to reproduce colour night time imaging compared with traditional day/night cameras which only display B&W when IR is activated. Light can also flash upon detection to deter intruders. |
 |
PB7311 |
|
- Connector: Type A Male, Gold
- Wire gauge: 26AWG
- Wire material: Bare copper
- Out-diameter: 8.5mm
- Resolution: 4K (3840 x 2160) @ 30Hz max.
- Data rate: 18GBPS
- Colour depth: 36BIT
- Type of shielding: Triple shield
|
|
HDMI certified. Lifetime warranty. This range is supplied in a plastic bag only, Features booster amplifier for lower grade screens. |
|
P7433 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7433A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
S9815B |
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS Sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.8mm Fixed Lens
- IR Distance 25M Max.
- Internal POE and SD Card Slot
|
|
A day/night high resolution IP dome camera with multi-codec support. Offering a clear 2592x1944 image at 30fps for integration with HD network video recorders. |
 |
M8882A |
|
- Rapid charging with BC1.2 technology, power output up to 2.4A
- Innovative design for space saving, put your devices on top of charging station when charging
- Adjustable separators allows you to adjust the width needed for different devices
- Protection against over-charging, over-voltage, over-heating and short circuit
- Solid and stable base, it can support up to 10 devices
- 2 charging ports with QC3.0
- QC3.0 is backward compatible with Quick Charge 2.0
|
|
This 10 port USB charger allows you to charge up to 10 mobile devices at once. Ideal for workplaces, schools and large families. Keep everything charged up and ready to go. |
 |
X0585
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
H8126C |
|
- Low profile design - only 55mm deep!
- +3 to 15° tilt adjustment.
- 60° swivel adjustment.
- Plastic mount covers provide a neat & tidy finish.
- Cable management guides.
- Built in levelling adjustment.
- Makes easy forward or backward viewing angle adjustments for reduced glare and eye strain.
- Sturdy and durable steel construction.
|
|
This cantilever wall bracket is designed to mount flat or curved screens up to 60kg where quick screen adjustment is required. VESA compliant mounting dimensions from 300x300 to 800x400. +3° to -15° tilt adjustment is provided, plus swivel up to 60° in either horizontal direction. |
 |
H8232A |
|
- Application: Desk mount
- Screen Size: 13"(330mm) - 27"(686mm)
- Weight Capacity: 6kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13"-27" weighing up to 6kg. Includes 2 USB ports. |
 |
A2384 |
|
- Rated power: 50W RMS per channel
- Attenuation: 10 step control
- Pos 1: OFF
- Pos 2-3: 6db per step
- Pos 4-10: 3dB per step
- Channel separation: 38dB @ 1KHz
- Crosstalk (between ch.): 50dB @ 1KHz
- Wire size: 14-22AWG
- Dimensions (mm): 218W x 50H x 185D
|
|
Allows on/off switching and level control of two sets of either 4Ω or 8Ω stereo speakers. Includes impedance correction circuit and a protection switch for use with 4Ω speakers. Power capacity up to 50W RMS per channel. Each stereo speaker |
 |
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
 |
T3201 |
|
- Clear tank with PCB board hanging clips and freestanding feet.
- Aeration pump for maximising the effectiveness of the etchant.
- Suitable for ferric chloride or ammonium persulfate.
|
|
Get first class results with one-off home brew or prototype PCBs with this etching tank. Save time and money over commercially available PCBs. Ensures efficient, clean and safe etching. The included pump aerates the etchant, maximising it's effectiveness. |
 |
C0901 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
A great addition to any alfresco area these wall speakers offer high performance music reproduction for an affordable price! 3.5” 30W RMS drivers. 8Ω input. |
|
PB7309 |
|
- Connector: Type A Male, Gold
- Wire gauge: 26AWG
- Wire material: Bare copper
- Out-diameter: 8.5mm
- Resolution: 4K (3840 x 2160) @ 60Hz max.
- Data rate: 10.2GBPS
- Colour depth: 36BIT
- Type of shielding: Triple shield
|
|
HDMI certified. Lifetime warranty. This range is supplied in a plastic bag only, Features booster amplifier for lower grade screens. |
 |
T2457 |
|
- Easy to start, reliable piezo ignition
- Torch stays lit after initial ignition
- Gas feed flame adjustment
- Refillable gas chamber (can be detached from head)
- All metal gas chamber and feed system
- Wind proof jet flame
- Safety ignition lock to prevent accidental lighting
- Refills with standard butane gas
|
|
This handy blow torch kit features three individual nozzles for different types of jobs. Ideal for trades requiring both precision brazing and high output wide spread flames. Iroda model: CT-610 |
 |
H8932 |
|
- Texas Instruments PCM5122 - 192kHz Sampling Rate/24bit Resolution DAC with 112-db SNR
- Using I2S bus, it separates clock and serial data signals resulting in a lower jitter
- Infrared and remote control via app
- Plays dsd, mp3, wav, wma, aac an many streaming services, airplay and bluetooth casting
- Supports OS, Volumio, Roon, Moode, Raspbian and many more
|
|
Turns your Pi into a high resolution network music player for MP3, FLAC, ALAC, WAV, AAC, FLAC, DSD, Audio CD and many more file types. On-board DAC for very high quality audio output. The ideal home music server for the audiophile! All aluminium case provides excellent cooling for your Pi 4. |
 |
M8060 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
A0323 NEW
|
|
|
|
A comprehensive all-in-one USB travel charger to keep all your portable devices charged while at home or overseas! It features 65W USB C power delivery output for laptops, mag safe compatible wireless charging for your phone and a standard USB A QC3.0 output for simultaneous charging of up to 3 devices. |
 |
S9753B |
|
- 9 individually PTC protected outputs rated 0.8A (continuous) each.
- Short Circuit Protection
- Overcurrent Protection
- Overvoltage Protection
|
|
Designed for powering up to a maximum of nine 12V DC CCTV cameras. Each output is individually fused and can be set on or off via internal jumpers. There is a host of protection on each output to prevent spikes and surges damaging the connected cameras. S |
 |
X2319B |
|
- IP65 weatherproof protection
- Ultra long life Epistar SMD5730 chipset
- Better energy efficiency compared to halogen lamps
- Die cast aluminium case with adjustable mounting bracket
- Safe to use for indoor or outdoor applications
|
|
This slim IP65 energy efficient LED flood light is ideal of outside your house so you can see when you arrive home late or even in the back garden while your entertaining to provide light. Also suitable for indoor use. The case is made with durable diecast aluminium and includes a mounting bracket. The specially made aluminium reflector improves li |
 |
M8561 |
|
- Output short-circuit protection (Auto reset when short circuit is removed)
- Output current-limiting and over-voltage protection
- Separate standby battery circuit with fast changeover
- Standby battery voltage shutdown below 10.8V DC
|
|
A complete 12V dc power supply and battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). When mains fails, the load switches and is p |
|
P7429 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7429A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- Supports eARC
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
