|
Description |
Downloads |
Specs |
Ordering |
|
 |
A0289A |
|
- Charges 2 cells at once
- Charging / Fully charged indication
- Powered by any USB charger at home or in the car
- Compatible with Lithium-Ion, NiMH and NiCd cells
- Over-charge protection
- Short-circuit protection
- Reverse polarity protection
- 0V activation function to charge the Li-ion cells with Protection PCB design
|
|
This compact USB battery charger gives you the flexibility of charging both lithium ion (Li-Ion), nickel metal hydride (Ni-MH) and nickel cadmium (Ni-Cd) cells. USB charging allows it to be connected to any mains or car charger. |
 |
A0346 |
|
- Kit includes 1 RF remote + 1 outlets
- RF Remote control means line-of-sight is not necessary
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby 240V power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance. |
 |
A1039 |
|
- Infra-red hub
- Power supply
- Infra-red target (receiver)
- Two dual eye infra-red emitters
|
|
This system incorporates a plasma friendly target, junction box and power supply. It controls four AV devices remotely via the included dual eye infra-red emitters. |
 |
A1040 |
|
- IR Junction Box
- Direct IR lead for amplifiers
- 12V DC 500ma plugpack.
- Note: All IR emitters are available to purchase separately. See 'Accessories' listed on this page.
|
|
The A 1040 can be used in several different installations, depending on your requirements. Other Resi-Linx items may be require to complete your system design. |
 |
A1041 |
|
- Target Junction Box
- LCD Friendly Target
|
|
This suite of resi-linx® infra red (IR) products allows remote control of your AV equipment from anywhere in the house.
|
 |
A1111 |
|
|
|
This Bluetooth wireless audio adapter is designed to allow you use of your wireless bluetooth headphones in commercial airplanes. It features a dual 3.5mm plug which plugs into the armrest. |
 |
A1112 |
|
- Ultra slim design, perfect for Nintendo Switch.
- Send audio to two pairs of Bluetooth headphones at once.
- No external battery required, powered from USB port.
- USB type C or type A connection (with use of included adaptor).
- Low power consumption.
|
|
The Gulikit Route Air is an ultra thin USB C type Bluetooth transmitter adapter is suitable for use with Nintendo Switch, PS4, PC and laptops. |
 |
A1168 |
|
- Foxtel compatible (channel & volume controls only)
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
 |
A2384 |
|
- Rated power: 50W RMS per channel
- Attenuation: 10 step control
- Pos 1: OFF
- Pos 2-3: 6db per step
- Pos 4-10: 3dB per step
- Channel separation: 38dB @ 1KHz
- Crosstalk (between ch.): 50dB @ 1KHz
- Wire size: 14-22AWG
- Dimensions (mm): 218W x 50H x 185D
|
|
Allows on/off switching and level control of two sets of either 4Ω or 8Ω stereo speakers. Includes impedance correction circuit and a protection switch for use with 4Ω speakers. Power capacity up to 50W RMS per channel. Each stereo speaker |
 |
A2698A |
|
- DAB+ Digital Tuner / decoder.
- FM Radio Tuner.
- Bluetooth Player for pairing with handheld devices (phones, tablets etc).
- Station Presets (10 for DAB+, 10 for FM) from remote control.
- Remote control with Mute button and Bluetooth transport controls.
- DLS and RDS enabled.
- Autoscan tuning feature for both DAB+ and FM (Seek).
- Jog wheel for volume control and menu navigation and function execution.
|
|
Experience the crystal clear signal quality that digital radio can provide by using this compact hi-fi component style DAB+/FM tuner. It is an ideal replacement for your non-DAB+ analog hi-fi or home theatre receiver. |
 |
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
 |
A3134E |
|
- Supports full 3D video format
- Displays an Ultra HD source on up to two Ultra HD displays
- Support high resolution up to 3840X2160@60Hz
- Supports four kinds of EDID handling abilities
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit deep colour
- Supports LPCM 7.1 Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of a single HDMI source to multiple HDMI displays with no loss of quality. |
 |
A3135F |
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
- Online firmware upgrade via Micro USB Port
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
 |
A31489 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. Includes transmitter and receiver. |
 |
A3194 |
|
- Allows digital signals to be transmitted using a single Cat5e or Cat6 cable
- Supports multichannel audio
- Select one input from Coaxial or Toslink input ports, and send S/PDIF audio signal to both Coaxial and Toslink output ports simultaneously
- 2 Emitter output connections
- Convenient IR confirmation LED
- Power receptacle with LED indicator
|
|
Allows digital signals to be transmitted using a single Cat5e or Cat6 cable. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
 |
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
 |
A4125 |
|
- HDMI over 2-conductor cable (Such as Twisted cable, telephone cable, Cat5e/6/7 cable etc)
- With 1x Loop HDMI output at transmitter
- Transmission more than 3800m
- Support Multi-level cascading
- HDMI Resolution up to 1080p
- HDCP compliant
- IR pass-through control
- Includes power supply
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
A4126 |
|
- Support Audio Format: LPCM audio format
- Transmission Distance: 3800m 2-Conductor cable (Recommend to use 12AWG-19AWG cable)
- Supported Video Format:
- DTV/HDTV:480i/ 480P/576i/576P/720P/1080i/1080P
- VESA: 800x600, 1024x768, 1280x768,1280x960,1280x1024, 1680x1050,1920x1080, 1280x720, 1360x768,1400x1050,1280x1024.
- Connector on Receiver:
- 1x Red Terminal Post, 1x Black Terminal Post
- 1x HDMI Output, 3.5mm
- 1x 3.5mm jack for IR-RX
- DC 5.5 x2.1mm Jack
- Power consumption: 5.5watts(Maximum)
- Dimension: 206Lx110Wx33Hmm
- IR frequency: 38K-56KHZ
- Weight: 548g
|
|
This ingenious Foxtel compatible device allows you to extend your 1080p HDMI source over any 2-conductor cable including twisted cable, telephone cable or Cat5/6 etc. We recommend 12AWG - 19AWG cable. Extends a 1080p signal up to 3800m over standard gure 8 cable! |
 |
A5332 |
|
- Input impedance: 20KΩ (bal.)
- Maximum input level: ≥16dB
- Connections: Balanced XLR, 6.35mm jack
- Output impedance: 100Ω
- Maximum output level: ≥15dB
- Equaliser control 31 band (1/3 octave)
- High pass filter: 40Hz 12dB/octave
- Feedback threshold LED: ≥-22dB
- Peak sensitivity: Lit 3dB before clip point
- Frequency response: 20Hz - 20KHz (±0.5dB)
- THD + S/N %: <0.1% (20Hz - 20KHz @ 0dB)
- S/N ratio: ≥90dB
- Power supply: 240VAC
- Dimensions: ≈482W x 230D x 132Hmm
- Weight: 5.4kg
|
|
This professional unit delivers outstanding equalisation both in live or studio applications. Invaluable
for counteracting poor room or venue acoustics. The design employs ultra low noise audio amplifiers
with high quality components for outstanding sou |
 |
C0871 |
|
- Impedance: 8Ω
- Power Input: 35W RMS, 80W Max
- SPL (1W @ 1m): 90dB,
- Frequency Response: 50Hz - 20kHz
- Qts: 0.64
- Vas: 15.98 cu ft (Infinite Baffle)
- Crossover Frequency: 2.5kHz
- Weight: 1.6kg each
- Mounting Hole Size: 275 x 190mm
- Dimensions: 304L x 223W x 88Hmm
|
|
An outstanding choice for use in in-wall or ceiling applications such as home theatre or reticulated music systems. Features excellent hi-fi reproduction and high power handling capability.
Designed to be installed into ceilings or walls, this low prof |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C5160
|
|
- User Friendly: Simple plug and play interface
- Bluetooth: Stream audio wirelessly from any bluetooth enabled device
- Power Source: Large 39.96Wh internal battery for long play times (6 to 8 hours at 80% volume)
- TWS: True wireless stereo pairing synchronize two speakers together to play the same music
- USB Port & Micro SD Card Slot: Access music stored on memory devices
- FM Radio: Digital FM tuner with auto scan
- Digital Recorder: Record music and spoken word applications directly onto your flash drive
- Wireless Microphone: Included in box, features volume & echo controls
- Mic Inputs: Microphone input with independent volume and echo controls
- Volume Control: Independant master volume, bass & treble controls
- AUX Input: Plug and play smart phones, tablets & MP3 players
- Party Lights: Exciting lighting effect with multiple colours
|
|
This Bluetooth party speaker and wireless mic PA system has been designed for outdoor or indoor entertaining with colour LED lighting for added party atmosphere. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.