|
Description |
Downloads |
Specs |
Ordering |
|
 |
W4200 ROHS
|
|
- Conductor
- Material: Oxygen Free Copper
- AWG: 18.8mm2 × 1C (4AWG)
- Construction: 1666/0.12mm±0.008mm
- Stranded Diameter: 7.53mm
- Jacket
- Material: PVC
- Average Thickness: 1.34mm
- Cable Diameter: 10.2±0.15mm
- Jacket Colour: Red Transparent
- Physical and Electrical Characteristics
- Rated Voltage: 300V DC
- Rated Temperature: 105°C
- Rated Current: 146 Amps
- Maximum DC Resistance: 0.00098M Ω
- Tensile Strength: ≥10.3 Mpa (Insulation and Jacket)
- Elongation: ≥100% upward (Insulation)
- Dielectric Strength: 2kV/min (Insulation in water)
|
|
High power handling cable for distributing power. Commonly used as power cable for car stereo systems, where high current handling is crucial for powerful, clean sound. |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
W4202 ROHS
|
|
- Conductor
- Material: Oxygen Free Copper
- AWG: 18.8mm2 × 1C (4AWG)
- Construction: 1666/0.12mm±0.008mm
- Stranded Diameter: 7.53mm
- Jacket
- Material: PVC
- Average Thickness: 1.34mm
- Cable Diameter: 10.2±0.15mm
- Jacket Colour: Black Transparent
- Physical and Electrical Characteristics
- Rated Voltage: 300V DC
- Rated Temperature: 105°C
- Rated Current: 146 Amps
- Maximum DC Resistance: 0.00098M Ω
- Tensile Strength: ≥10.3 Mpa (Insulation and Jacket)
- Elongation: ≥100% upward (Insulation)
- Dielectric Strength: 2kV/min (Insulation in water)
|
|
High power handling cable for distributing power. Commonly used as power cable for car stereo systems, where high current handling is crucial for powerful, clean sound. |
 |
W3400 ROHS
|
|
- Outside diameter: ≈10mm
- Coax Shielding (per core)
- Size: 16 x 6/0.12
- Outside diameter: ≈4mm
- Coax Centre conductor (per core)
- Construction: Bare copper
- Size: 1/0.5
- Conductor area: 0.19mm2
|
|
As used in home theatre and commercial installations requiring high quality video signal over longer distances than pre-made leads can provide.
For BNC connectors to suit, see P 0525. |
 |
H8950A ROHS
|
|
- Square form factor
- Compatible with Raspberry Pi B+, Pi-2, Pi-3
- Media server function with space for internal 2.5” HDD
- Multiple mount options including VESA
- Non-slip rubber feet
- LED guides for Power & Action on Pi B+ , Pi-2, Pi-3
- Internal space for addition of a HAT
- Internal space for hidden front facing Pi-Camera
- Removable panel for SD card access
- Secure/lockable Top Cover with 4 security screws
- Exceptional ventilation + space for onboard heat-sinks
- Top cover with easy clip system for PCB access if required
- Recessed pockets for access to all external connectors
|
|
A square case for your Raspberry Pi with internal 2.5&rdquo HDD bay and space for HATs & a camera. Ideal for desktop use, may also be VESA mounted. |
 |
Z6270 ROHS
|
|
- Freescale MC13224V 32-bit ARM7 Processor
- Integrated 2.4GHz 802.15.4 transciever
- Up to 100mW Output Power
- 96k RAM
- Arduino Shield Compatible
- 12-bit ADC, 2 UARTS, I2C and SPI
- SNAPpy Interpreter (Python-like language)
|
|
A shield compatible development board featuring the Synapse SM700 wireless network module. Designed to set up wireless mesh networks with a 32-bit ARM7 processor & plenty of on-board memory. |
 |
W3110 ROHS
|
|
- Outside diameter: ≈9.5mm
- Video shielding size: 16/6/0.11
- 75Ω video conductor size: 30/0.11
- Video conductor area / gauge: 0.29mm2 (23AWG)
- Audio size: 20/0.11
- Audio shielding size: 32/0.12
- Audio conductor area / gauge: 0.19mm2 (24AWG)
- Roll Size: 100m
|
|
Low loss stereo audio cable with central video transmission cable. Twin shielded with copper braid and mylar foil. |
 |
W3100 ROHS
|
|
- Shielding
- Size: 7/16/0.12
- No. of Strands per Braid: 7
- No. of Braids: 16
- Strand Diameter: 0.12mm
- Video Inner Conductor
- Size: 45/0.11
- Conductor Area: 0.43mm2
- Audio Inner Conductors
- Size: 35/0.11
- Conductor Area: 0.33mm2
- Dimensions: 19.5 x 7.5mm
- Roll Size: 50m
|
|
Low loss stereo audio cable with central video transmission cable. Twin shielded with copper braid and mylar foil. |
 |
D2359A ROHS
|
|
|
|
A compact hub providing connection for an external monitor via HDMI up to 4K @ 30Hz. Connects to USB type C devices and provides connection for external peripherals via 2 x USB 3.0 ports, SD card slot, Micro SD card slot and external monitor connection via HDMI. |
 |
P1773 ROHS
|
|
- Foil shield gives increased protection against EMI/RFI
- Molded backshells provide durability and increased strength at cable entry point
- nickel plated contacts provide reliable connections with repeated mating cycles
- 1.8m Length.
|
|
DE15 H/D Male to DE15 H/D Male |
 |
H0260 ROHS
|
|
|
|
This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.
Note: C |
 |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
 |
S1730 ROHS
|
|
- Colour: Red
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the colour |
 |
S1704 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
S1722 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1702 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
|
S1724 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S1726 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S1734 ROHS
|
|
- Colour: Orange
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S1732 ROHS
|
|
- Colour: Green
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S1736 ROHS
|
|
- Colour: White
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. |
|
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
P1261 ROHS
|
|
|
|
Used in high end video & RF signal leads such as RGB, component, digital television & pay TV applications. See tools section for the T 1562 crimping tool to suit. Cable entry size 5mm to suit RG59 coaxial cable. |
 |
P1273 ROHS
|
|
|
|
Used in high end video & RF signal leads such as RGB, component, digital television & pay TV applications. See tools section for the T 1562 crimping tool to suit. Cable entry size 8.5mm to suit RG6 coaxial cable
PLEASE NOTE: THESE CONNECTORS CAN ONL |
 |
P1263 ROHS
|
|
|
|
Suits RG59 coaxial cable. Right angle design is perfect for tight spaces. Cable entry 7.1mm. |
