|
Description |
Downloads |
Specs |
Ordering |
|
 |
H8952 |
|
- Sleek minimal design
- NUC-like design (all connectors are brought around to one side).
- Excellent WiFi signals thanks to the plastic base
- Brilliant passive cooling (the whole top part of the case is a heatsink)
- Built-in fan with programmable speeds
- Power button with soft-shutdown
- Accessible GPIO with colour coded pinout
|
|
This Raspberry Pi 4 Argon ONE Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
H8930 |
|
- Supports a single SSD drive
- Accepts M.2 SSD NGFF Key B and Key B+M
- SSD Size: NGFF M.2 2280 2260 2242 2230
- Chipset: ASMedia Technologies - ASM1153E
- Compliant with USB3.0 Specification Revision 1.0
- Up to 6Gbps transfer speeds
- 2 Standard (type A) HDMI Ports
- Aluminium Alloy Top for Passive Cooling
- Programmable 30mm Fan
- Programmable IR Receiver
- Clean Power Shutdown
- Multi-Function Power Button
- Power Management Modes (with always ON)
- Magnetic Top Access to GPIO Pins
- Colour Coded GPIO Pins
- Easy Installation
|
|
A R-Pi 4 enclosure supporting one M.2 SATA SSD drive, plus two full size HDMI ports, power management modes and built in IR control support. Features both active and passive cooling from an internal fan and aluminium heatsinking case. |
 |
H8952A |
|
- Sleek minimal design
- 2 x Standard 'type A' HDMI ports
- Aluminium Alloy top for passive cooling
- Programmable 30mm fan
- Clean Power Shutdown
- Multi-function power button
- Power management modes (with Always ON)
- Magnetic top access to GPIO pins
- Colour coded GPIO pins
- Easy installation
|
|
This Raspberry Pi 4 Argon ONE V2 Case not only has brilliant passive cooling (the whole top part of the case is a heatsink) but also protects the Raspberry Pi without compromising the full functionality of the motherboard. |
 |
Q1089 NEW
|
|
- True RMS Auto Range.
- Large easy to read reverse backlit screen.
- Simple push button operation.
- Large multifunction display.
- Indicates correct connection jacks.
|
|
This compact true RMS digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
 |
M8521A |
|
- Suitable for all 6V and 12V lead acid and gel batteries
- Suits battery recharging or maintenance (may be permanently connected).
- Protection against short circuit
- Ideal for battery storage or seldom used vehicles
- Light weight ‘plug in’ design
- Ring terminal or crocodile clip connection
|
|
This 6V/12V battery charger maintainer offers 600mA charging suitable for lead, gel cell and lead-acid batteries, including maintenance-free batteries. |
 |
H8950A ROHS
|
|
- Square form factor
- Compatible with Raspberry Pi B+, Pi-2, Pi-3
- Media server function with space for internal 2.5” HDD
- Multiple mount options including VESA
- Non-slip rubber feet
- LED guides for Power & Action on Pi B+ , Pi-2, Pi-3
- Internal space for addition of a HAT
- Internal space for hidden front facing Pi-Camera
- Removable panel for SD card access
- Secure/lockable Top Cover with 4 security screws
- Exceptional ventilation + space for onboard heat-sinks
- Top cover with easy clip system for PCB access if required
- Recessed pockets for access to all external connectors
|
|
A square case for your Raspberry Pi with internal 2.5&rdquo HDD bay and space for HATs & a camera. Ideal for desktop use, may also be VESA mounted. |
 |
M8632A |
|
- Input: 12-24V
- Output: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A
- Total Power: 48W. (30W PD, 18W QC3.0)
- Colour: Black
|
|
This car accessory provides USB C PD output @ 30W and QC3.0 USB A type socket @ 18W. 12-24V DC input. |
 |
A1168 |
|
- Foxtel compatible (channel & volume controls only)
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
 |
T2196 |
|
|
|
Designed to crimp solid pins used in Deutsch DT multi-pole connectors. Suits size 12, 16 and 20 DT series pins. Included in the kit are a terminal housing release tool, pin removal tool and screwdriver. |
 |
T1533B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. |
 |
T1552A |
|
- Heavy duty all metal construction
- Ratchet action handle
|
|
Professional grade crimper ideal for automotive terminals and connectors. Crimping range 0.25mm - 6.0mm (suits red, blue and yellow size connectors). Ratchet action handles. Heavy duty all metal construction. |
 |
T2457 |
|
- Easy to start, reliable piezo ignition
- Torch stays lit after initial ignition
- Gas feed flame adjustment
- Refillable gas chamber (can be detached from head)
- All metal gas chamber and feed system
- Wind proof jet flame
- Safety ignition lock to prevent accidental lighting
- Refills with standard butane gas
|
|
This handy blow torch kit features three individual nozzles for different types of jobs. Ideal for trades requiring both precision brazing and high output wide spread flames. Iroda model: CT-610 |
 |
S5276A |
|
- 8 alarm zones
- Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
- 56 user codes can be programmed to operate by keypad PIN, radio key or access card.
- Optional Ness Radio Interface for fully integrated wireless security.
- Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
- Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
- 3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
- Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter.
- Home Mode allows partial arming, (eg, perimeter security overnight).
- Day Mode feature allows daytime monitoring of fire doors, coolrooms etc.
- Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
- Keypad Panic and Duress feature.
- Two button arming feature.
- Fire Alarm feature with different siren tones.
- Highly flexible zone to output mapping.
- Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Nessensor™ vibration sensors.
- Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
- Siren chirp and strobe flash on arming with radio key.
- Quiet chirps option on arm/disarm by radio key.
- True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
- 4 programmable auxiliary outputs (Up to 8 Aux outputs optional).
- Optional output expander.
- Enhanced serial data input/output via RS232.
- Automatic reset fuses.
- Programmable Reset Output lockout.
- 30 event memory from KPX and Saturn keypads. 80 event memory can be accessed using Navigator keypad or NessComms™.
- Standard defaults to suit most applications.
- Easy programming by keypad or NessComms™ software by direct connect.
- All programming data is permanently stored in a non-volatile memory.
- All inputs and outputs are heavily protected against lightning and high voltage supply transients.
- High efficiency DC power supply with dual 17VAC/20VDC power input
|
|
This 8 Zone Alarm Panel features flexible 8 Zone control panel & 4G Cellular communicator. Supplied with 4G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.
|
 |
A2698A |
|
- DAB+ Digital Tuner / decoder.
- FM Radio Tuner.
- Bluetooth Player for pairing with handheld devices (phones, tablets etc).
- Station Presets (10 for DAB+, 10 for FM) from remote control.
- Remote control with Mute button and Bluetooth transport controls.
- DLS and RDS enabled.
- Autoscan tuning feature for both DAB+ and FM (Seek).
- Jog wheel for volume control and menu navigation and function execution.
|
|
Experience the crystal clear signal quality that digital radio can provide by using this compact hi-fi component style DAB+/FM tuner. It is an ideal replacement for your non-DAB+ analog hi-fi or home theatre receiver. |
 |
T2370 |
|
- Deburring is a finishing method used mainly in industrial and manufacturing settings. Many materials can be finished by deburring, such as metals like steel, woods and plastic. A deburring tool is placed along the edge of the item to be finished, and used to cut away a small area. Deburring is important for aesthetics, functionality and quality.
|
|
It's suitable for scraping cooper and aluminium filings inside the tubing. This hand tool features a SUJ2 blade which follows shapes and contours easily allowing chamfering and deburring. |
 |
D2323 |
|
- Two USB QuickCharge 3.0 charging ports.
- USB type C Power Delivery charging port.
- Can charge a phone, tablet and laptop simultaneously.
- Suits standard 60mm desk cabling hole.
- Protective sliding dust cover.
- Near flush mount finish.
|
|
This USB power delivery charger allows you to build fast convenient device charging into your desk and is capable of charging a phone, laptop and tablet simultaneously thanks to a generous 96W power supply (included). |
 |
A3194 |
|
- Allows digital signals to be transmitted using a single Cat5e or Cat6 cable
- Supports multichannel audio
- Select one input from Coaxial or Toslink input ports, and send S/PDIF audio signal to both Coaxial and Toslink output ports simultaneously
- 2 Emitter output connections
- Convenient IR confirmation LED
- Power receptacle with LED indicator
|
|
Allows digital signals to be transmitted using a single Cat5e or Cat6 cable. |
 |
T2247A |
|
- 0.01mm, 0.0005" and 1/128" display
- Internal and external measuring jaws
- Depth blade
- Imperial and metric scales
- LCD readout
- Stainless steel construction
|
|
High quality metal calipers for precision measuring with ease. 150mm capability, suitable for measuring internal, external and depth dimensions. Fitted with easy to read LCD allowing measurements within 0.01mm or 0.0005". |
 |
T5036A |
|
|
|
New lower price! Unique parts case features adjustable dividers on each side. Two sets of clips allow you to open one side at a time. 340x280x80mm |
 |
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
 |
M8868A |
|
- 65W USB type C Power Delivery Charger
- Ideal for phones, tablets and laptops
- USB type A QC3.0 charging
- Fully electrical authority approved
- 100-240V AC input suitable for use with travel adaptors when overseas
|
|
This powerful 65W USB charger features a QuickCharge 3.0 port as well as a USB C port to suit the latest devices. |
 |
T1574 |
|
- All steel construction
- Rubberised grips
|
|
Compact pocket size design suitable for use with solid core “through wire” or open-pass modular crimp plugs. Crimps and trims ends in one motion. All steel design with comfortable rubberised grips. |
 |
X4106 |
|
- Diameter: 1.3mm
- Length: 3.0m
- Life (hour): 3,000-5,000Hrs
- Operating Voltage: 90-110VAC
- Operating Frequency: 1,800-2,000Hz
- Stretching Resistance: 1KG
- Bending Diameter: > 40mm
- Swing: <30º
|
|
Electroluminescent (EL) wire is commonly used in costumes, decorations and DIY signs. EL wire is a flexible phosphor coated copper wire which glows a particular colour when an alternating current is applied to it. |
 |
X4101 |
|
|
|
This compact controller features two flashing speeds or constant on and is small enough to fit in your pocket. Note that the controller has a small inverter built in and will emit a low volume high pitch sound when switched on (this is typical of almost all EL wire controllers). |
 |
X4102 |
|
|
|
Capping for cut Electroluminescent (EL) wire ends |
