|
Description |
Downloads |
Specs |
Ordering |
|
![S1160A 200V 1.0A Horizontal Float Switch](https://images.altronics.com.au/thb/s/S1160A.jpg) |
S1160A |
|
- Switch type: SPST
- Switching current: 1A DC
- Contact rating 1.5A @ 200VDC (Max)
- Contact resistance: 90mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -55 to 70 degrees C
|
|
New model with increased current handling. Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. Includes a waterp |
![S1700 DPST Mom. Red Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1700.jpg) |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
![S1702 DPST Mom. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1702.jpg) |
S1702 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1704 DPST Mom. Orange Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1714.jpg) |
S1704 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1706 DPST Mom. White Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1706.jpg) |
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1722 DPST Alt. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1702.jpg) |
S1722 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1724 DPST Alt. Orange Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1714.jpg) |
S1724 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1726 DPST Alt. White Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1706.jpg) |
S1726 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1730 4PST Alt. Red Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1730.jpg) |
S1730 ROHS
|
|
- Colour: Red
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the colour |
![S1732 4PST Alt. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1732.jpg) |
S1732 ROHS
|
|
- Colour: Green
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1734 4PST Alt. Orange Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1704.jpg) |
S1734 ROHS
|
|
- Colour: Orange
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
![S1736 4PST Alt. White Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1736.jpg) |
S1736 ROHS
|
|
- Colour: White
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. |
![S2682 Dual Battery Isolator Kit](https://images.altronics.com.au/thb/s/S2682.jpg) |
S2682 |
|
- Emergency override feature
- LED status indicator
- Suitable for 12VDC Marine, 4WD, caravan and solar applications
|
|
This dual battery isolator kit allows you to charge two batteries at the same time from your engine alternator. The isolator kit will begin charging the second battery simultaneously when the start battery is sufficiently charged whilst engine is on.
|
![S2694 Power Hub and Battery Isolator Switch](https://images.altronics.com.au/thb/s/S2694.jpg) |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
![S2750 3 Way Switch Panel With Breakers](https://images.altronics.com.au/thb/s/S2750.jpg) |
S2750 |
|
|
|
Features 3 x 20A 12V DC rated switches with red illuminated with individual 15A DC breakers.
114W x 96H x 60Dmm. |
![S4732 18650 2600mAh Li-Ion Rechargeable Battery Solder Tag](https://images.altronics.com.au/thb/s/S4732.jpg) |
S4732
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
![S4733 18650 2600mAh Li-Ion Rechargeable Battery PCB Mount](https://images.altronics.com.au/thb/s/S4733.jpg) |
S4733
|
|
- Max. continuous discharge current: 20A
- Safe pulse discharge ratings: 95A < 0.5 sec, 65A < 1 sec, 40A < 5 sec, 30A < 6 sec
- Nominal capacity: 2500 mAh
- Nominal voltage: 3.6 V
- Discharge end voltage: 2.5 V
- Charging voltage: 4.20 +/- 0.05 V
- Standard charging current: 1.25 A
- Length: 65.85 mm
- Diameter: 18.33 mm
- Weight: 45.0 g
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. PCB mount version. |
![S4734 18650 2500mAh High Output Li-Ion Rechargeable Battery](https://images.altronics.com.au/thb/s/S4734.jpg) |
S4734
|
|
- Nominal Capacity: 2500mAh (0.2C, 2.5V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.6V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1250mA, Rapid charge : 4000mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 20A (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.5V
- Cell Weight: 45.0g max
- Cell Dimension: Height: 64.85±0.15mm, Diameter: 18.33±0.07mm
- Operating Temperature: Charge: 0 to 50°C, Discharge: -20 to 75°C
- Storage Temperature 1 year: -30~25°C, 3 months: -30~45°C, 1 month: -30~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. They offer a higher maximum current output than the standard 18650 batteries. |
![S5298 PIR Lux Wireless](https://images.altronics.com.au/thb/s/S5298.jpg) |
S5298 |
|
- 15m x 15m wide angle coverage
- Look down 'Creep Zone'
- White LED motion activated night-light
- Adjustable Pulse Count
- Adjustable Range
- High R.F. and E.S.D. immunity
- High white light immunity
- SAWR stabilised radio transmitter
- Capsule design with sealed electronics
- Front cover tamper protection
- Long life Lithium batteries supplied
- Low battery warning signal
- Hourly Supervision radio signals
- Includes wall mounting bracket
- Optional ceiling bracket available
|
|
The PIR Lux Wireless motion detector features a white LED night light, long battery life (up to 10years) and allows for ceiling mounting |
![S5317 Economy PIR Detector with 20kg Pet Immunity](https://images.altronics.com.au/thb/s/S5317.jpg) |
S5317 |
|
- Low standby current - only 5mA
- NC/NO alarm contacts
- 12x12m 110° detection range
- 9-16V DC operation
- 2/3 selectable pulse count
- Walk test LED
- Compact size, 109x65x46mm
|
|
These compact, easy to install, passive infra red
detectors offer excellent movement detection
for alarm systems at an affordable price. They
feature NC or NO contact output, 2/3 selectable
pulse count and 12m detection range. An internal
tamper switch ensures units cannot be deactivated
by intruders. The pet immune model ignores
movement fr |
![S8866 60cm (23.6”) 12 Volt LED Full HD Digital Television](https://images.altronics.com.au/thb/s/S8866.jpg) |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
![S9017A Smart Wi-Fi Pan/Tilt + Digital Zoom Indoor Camera](https://images.altronics.com.au/thb/s/S9017A.jpg) |
S9017A |
|
- 1080p recording
- 100° vertical tilt
- Pan: 355°
- 2.4GHz WiFi wireless connection
- MicroSD card slot (up to 128GB)
- Intelligent auto tracking follows moving people and pets
- Two way audio (mic & speaker in-built)
- Motion detect with push notifications to iOS/Android phones
- Support Tuya cloud storage for motion detected recordings
- Makes a great pet cam or baby monitor
- 5m night time infra-red coverage
- USB powered - requires 5V DC @ 1A (cable included)
|
|
Get the full picture of any space in your home with this 1080p wi-fi camera. Features pan & tilt ( horizontal 355° & vertical 100°) with intelligent motion tracking of moving people & pets. |
![S9109 4 Megapixel Fish Eye Lens Wi-Fi IP Dome Camera](https://images.altronics.com.au/thb/s/S9109.jpg) |
S9109 |
|
- H.264, H.265, JPEG compression
- 4 megapixel
- 2 way audio
- Micro SD card slot
- Alarm input
- Simultaneous multiple streams
- Supports ONVIF
- Internal PoE receiver
- 802.11b/g/n Wi-Fi on board
- Motion detect triggering
|
|
This "FISH EYE" lens camera is ideal for open plan office installations this camera allows you to record everything with a 360° panoramic view. The fish eye footage is then viewed via NVR/mobile app/VMS. This can reduce the number of cameras required to cover the same area with standard cameras. It captures a maximum of 2160x2160 @ 15fps. |
![S9119B IR Colour Dome Camera 4MP White AHD/960H](https://images.altronics.com.au/thb/s/S9119B.jpg) |
S9119B |
|
- Resolution : 2560H x 1440V (4MP)
- Sensor: 1/3” CMOS
- Lens: 2.8mm lens
- Min. Illumination: 0.01 Lux
- IR: 30m range (18 LEDs)
- Power requirement: 12V DC 500mA
- S/N Ratio: >50dB
- IP Rating: IP66
- Dimensions: 94Ø x 76Hmm
|
|
Surface mount dome camera housed in vandal resistant aluminium housing with infra red illumination for night time viewing. High resolution 4MP sensor produces clear crisp video signal. Lens has an fixed 2.8mm wide focal length. |
![S9128B Vandal Resistant Vari-Focal IP66 Colour Dome Camera](https://images.altronics.com.au/thb/s/S9128B.jpg) |
S9128B |
|
- 1/2.8"SONY Starvis Back-illuminated CMOS sensor
- AHD/CVI/TVI/CVBS 4 IN 1
- 2.7-13.5mm motorised Lens
- IR Distance max 30m
- IP66 outdoor, OSD & UTC support
|
|
This Vandal Resistant Vari-Focal IP66 Colour Dome Camera has been specifically designed for installation in applications where damage resistance is paramount eg bus or train stations, concourses, carparks etc. |