|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
Q1255A |
|
- Use on wood, wall board, sheet rock, cardboard, plaster, concrete, mortar and more
- Big backlit LCD display
- Replaceable electrode pins
- 2-in1 Digital LCD readout and analog bargraph
- Simultaneous measurement, display of moisture and temperature readings
- Materials selection measurements
- MAX/MIN/DATA hold
- Auto power off
|
|
Designed to measure moisture in wood and building materials this handheld meter can test levels in sawn timber, plaster, concrete, mortar and many other hard materials. |
 |
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
 |
Q1360 |
|
|
|
This pocket tester detects DC continuity and short circuits in coaxial leads and cable runs. It provides LED and audible feedback when testing is complete ensuring connection integrity. Fitted with male F connector, may be combined with many other adaptor |
 |
R2274S |
|
|
|
Mixed 10 pack of 24mm Dual Gang D Shaft Pots. Contents may vary.
|
 |
S4733
|
|
- Max. continuous discharge current: 20A
- Safe pulse discharge ratings: 95A < 0.5 sec, 65A < 1 sec, 40A < 5 sec, 30A < 6 sec
- Nominal capacity: 2500 mAh
- Nominal voltage: 3.6 V
- Discharge end voltage: 2.5 V
- Charging voltage: 4.20 +/- 0.05 V
- Standard charging current: 1.25 A
- Length: 65.85 mm
- Diameter: 18.33 mm
- Weight: 45.0 g
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. PCB mount version. |
 |
S4734
|
|
- Nominal Capacity: 2500mAh (0.2C, 2.5V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.6V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1250mA, Rapid charge : 4000mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 20A (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.5V
- Cell Weight: 45.0g max
- Cell Dimension: Height: 64.85±0.15mm, Diameter: 18.33±0.07mm
- Operating Temperature: Charge: 0 to 50°C, Discharge: -20 to 75°C
- Storage Temperature 1 year: -30~25°C, 3 months: -30~45°C, 1 month: -30~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. They offer a higher maximum current output than the standard 18650 batteries. |
 |
S5184A |
|
- SPST
- 760 x 530mm
- 6mm thick.
- 50cm fly lead.
- Normally OPEN contacts
- Activates with approximately: 2.5kg
- Maximum load bearing weight: 158kg
|
|
Ultra thin pressure mat for under carpet or rugs.
SPST
760 x 530mm
6mm thick.
50cm flylead.
Normally OPEN contacts |
 |
S5276A |
|
- 8 alarm zones
- Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
- 56 user codes can be programmed to operate by keypad PIN, radio key or access card.
- Optional Ness Radio Interface for fully integrated wireless security.
- Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
- Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
- 3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
- Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter.
- Home Mode allows partial arming, (eg, perimeter security overnight).
- Day Mode feature allows daytime monitoring of fire doors, coolrooms etc.
- Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
- Keypad Panic and Duress feature.
- Two button arming feature.
- Fire Alarm feature with different siren tones.
- Highly flexible zone to output mapping.
- Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Nessensor™ vibration sensors.
- Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
- Siren chirp and strobe flash on arming with radio key.
- Quiet chirps option on arm/disarm by radio key.
- True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
- 4 programmable auxiliary outputs (Up to 8 Aux outputs optional).
- Optional output expander.
- Enhanced serial data input/output via RS232.
- Automatic reset fuses.
- Programmable Reset Output lockout.
- 30 event memory from KPX and Saturn keypads. 80 event memory can be accessed using Navigator keypad or NessComms™.
- Standard defaults to suit most applications.
- Easy programming by keypad or NessComms™ software by direct connect.
- All programming data is permanently stored in a non-volatile memory.
- All inputs and outputs are heavily protected against lightning and high voltage supply transients.
- High efficiency DC power supply with dual 17VAC/20VDC power input
|
|
This 8 Zone Alarm Panel features flexible 8 Zone control panel & 4G Cellular communicator. Supplied with 4G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.
|
 |
S5288B |
|
- Plug-and-go operation - no programming required
- Alarm Panel Compatibility Compatible with all Ness PSTN alarm diallers in Contact ID DTMF and Voice formats
- Antenna with magnetic base supplied - long cable allows the unit to be installed in a secure housing
- Compatible with all Ness PSTN control panels and most third party panels
- LCD status display
- 12V Plug pack powered (included)
- On board battery backup
|
|
With this NESS 3G/4G Dialler you no longer need to worry about the absence of PSTN phone lines with the NBN roll out. The Ness 4G Dialler provides a 3G or 4G pathway for alarm diallers to communicate in the absence of a land line. |
 |
S5377 |
|
- Weather resistant design (IP54)
- Vandal resistant
- Compatible with 125KHz 64-bit EM cards & key fobs
- Built-in logics for stand alone, split-decoded and multi-station operations
- Controls “Going In” with user codes/cards
- “Going Out” with feature programmable egress button
- Door Bell for guests/service persons /tradesmen
- Stainless steel faceplate
|
|
This weatherproof vandal resistant door keypad controller is designed for controlling a door strike in home or business security installations. It combines a digital keypad and proximity EM card reader in one unit. |
 |
S6018 |
|
|
|
This high current fuse block uses MEGA type fuses. Suits M8 ring terminals. 250A max. Gold plated connections. Size: 129Wx44Hx37Wmm.
Fuse not included. |
 |
S9292B |
|
|
|
Downscales a VGA signal to a composite video signal for connecting the VGA output of a DVR to a standard monitor input. Supports resolutions up to 1920 x 1024 @ 60Hz. No software required. NTSC or PAL switchable. USB powered. |
 |
S9349K |
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 8MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 16CH HD or 32CH IP Camera Input
- Support 2 SATA up to 16TB Capacity
|
|
This 16 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). Each channel can be individually recorded in real time 25fps @ 1080p to the internal SATA hard drive (available separately). Or 8fps @ 8MP (2592×1944px) resolution on all 16 channels. |
 |
S9367D |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
 |
S9369 |
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 25 channels up to 5MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 16 x 15.4W PoE network interfaces
- Four internal SATA interface, max 32TB
- Remote control & mouse
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.4 support
|
|
This multi channel network video recorder offers 5MP resolution recording at 25fps for up to 25 cameras (or 12ch of 4K @ 25fps). For ease of installation, 16 dedicated PoE ports are in-built. It utilises H.264/H.265+ compression to maximise your hard disk space and has wide camera compatibility with ONVIF 2.4 support. |
 |
S9379 |
|
- HD Video Recording
- HD real-time recording brings users clear images while video recording and playback
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- Multi-platform Remote Access
- Fully compatible with iPhone & iPad, and Internet Explorer on Windows operating system
- AVTECH free CMS program on both Windows and MAC OS
- Powerful Storage Capacity
- Support up to 3 hard disks for long-term recording and saving large amount of recording data.
- Smart Recording
- High video resolution switch for events to optimize the recording efficiency of the hard disk.
- External Disk Array Support for More Video Storage
- eSATA interface built-in to connect a disk array (up to 4-bay disk array with RAID 0 and 1) for more video storage.
- Full HD HDMI Video Output
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- RS485 Communication
- Capable of external device connection to extend the functionality and flexibility of your NVR.
|
|
These network video recorders are designed to capture streams from up to 25 IP cameras with event notification via a remote monitoring app for Android or iOS devices. |
 |
S9380A |
|
- Installations of CCTV systems can vary greatly in configuration and technical complexity. We recommend that unless you have skills in computer networking that you engage a CCTV installer or professional to set up your installation. The process can involve opening router ports, setting up IP routes etc which can be daunting for a beginner. Every installation is different, as a result, it can be difficult to diagnose set up issues over the phone or via email.
|
|
This compact DVR can achieve up to 25x 12MP channels at 25fps or 36x 5MP channels at 25fps! Suitable for use with an external dedicated PoE switch (see below) it offers high resolution surveillance solution for installations requiring a large number of cameras. |
 |
S9445 |
|
- 4K Ultra Full HD video
- 30MP still shot capability
- Internal battery pack with solar recharging
- Adjustable triggering, intervals and duration.
- Loop recording
- Large aperture lens
- WiFi connectivity
- 30MP clear night and day imaging
- IP66 rated
- 18 month indoor standby time
- Bluetooth 5.0 with low power consumption
- Full automatic IR filter
- Built-in microphone & speaker
- Moon phase/temperature/time/date stamp functions
|
|
This 4k solar powered Wi-Fi trail camera is a wildlife and surveillance camera with a 3 zone infrared sensor. |
 |
S9753B |
|
- 9 individually PTC protected outputs rated 0.8A (continuous) each.
- Short Circuit Protection
- Overcurrent Protection
- Overvoltage Protection
|
|
Designed for powering up to a maximum of nine 12V DC CCTV cameras. Each output is individually fused and can be set on or off via internal jumpers. There is a host of protection on each output to prevent spikes and surges damaging the connected cameras. S |
 |
S9810 |
|
- H.264, H.265+, JPEG, MJPEG compression
- 5 megapixel @ 20fps
- Offers night time colour video
- Ideal for domestic installations
- In-built LED security light
- Motion detect flashing mode
- Up to 30m night time illumination
- Metal housing
- 2.8mm lens
- Simultaneous multiple streams
- Supports ONVIF
- SD card slot
- PoE receiver
|
|
A new series of camera designed to provide full colour video day and night. The camera has a security light in-built which allows the high sensitivity sensor to reproduce colour night time imaging compared with traditional day/night cameras which only display B&W when IR is activated. Light can also flash upon detection to deter intruders. |
 |
S9810A |
|
- H.264, H.265+, JPEG, AVI compression
- 5 megapixel @ 30fps
- Offers night time colour video
- Ideal for domestic installations
- In-built LED security light
- Motion detect flashing mode
- Up to 30m night time illumination
- Metal housing
- 2.8mm lens
- Simultaneous multiple streams
- Supports ONVIF
- SD card slot
- PoE receiver
|
|
A new series of camera designed to provide full colour video day and night. The camera has a security light in-built which allows the high sensitivity sensor to reproduce colour night time imaging compared with traditional day/night cameras which only display B&W when IR is activated. Light can also flash upon detection to deter intruders. |
 |
S9815B |
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS Sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.8mm Fixed Lens
- IR Distance 25M Max.
- Internal POE and SD Card Slot
|
|
A day/night high resolution IP dome camera with multi-codec support. Offering a clear 2592x1944 image at 30fps for integration with HD network video recorders. |
 |
S9843B |
|
- 2 x 18650 replaceable batteries
- Ultra low power design
- Two way audio
- 166° wide angle lens
- iOS/Android Tuya SmartLife monitoring app
- 2.4GHz Wi-Fi connection
- Day/night mode with IR LEDs
- 1080p footage recording
- PIR motion detection
- Magnetic & screw mount bases included
- SD card slot
|
|
An instant security camera, anywhere you need it. Powered by an internal lithium battery pack, this camera provides 4-6 months of CCTV recording in 1080p resolution. |
 |
S9845A |
|
- 2 x 18650 replaceable batteries with solar panel recharging
- Includes wall mount bracket
- Two way audio (mic & speaker in-built)
- 3.6mm (90°) lens with digital zoom
- Day/night mode with IR LEDs
- 1080p recording
- Motion detect with push notifications to iOS/Android
- Micro SD card slot (up to 32GB)
- Compatible with 2.4GHz Wi-Fi
|
|
This 1080p wireless 2MP camera is ideal for use in situations where cabling for power and video are impractical. It provides superb clarity for both day and night use and can be configured to automatically record when motion is detected. Motion events can send push notifications to your phone. |
