Solar Charge Controllers - Altronics

1-16 of 16

Refine

Type

Products

Brands

Sort

Type 5MPPT Controllers 10PWM Controllers

Products 1New Only 16In Stock Only 3Not In Printed Catalogue

	Description	Downloads	Specs	Ordering
	12V 3A PWM Solar Charge Controller N2003	Instructions	Suits 12V systems only Adjustable run time for connected load or “always on” configuration Overcharge, discharge, over current, short circuit (with recommended 3A fuse) and reverse polarity protection. Three stage PWM charge control	ea $24.50 2+ $21.95 4+ $19.95 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	An ultra compact PWM solar charge controller for compact solar power systems using panels 40 Watts or less.
	6V/12V 5A PWM Waterproof Solar Charge Cont... N2005		Waterproof IP67 Rated Voltage:DC 6V/12V Max input VOC: 11V(6V) / 22V(12V) Max Current: 5A Voltage of solar panels: 30W (5A,6V)/60W (5A,12v) Float: 13.8V Charge reconnect: 6.5V (6V) / 13V (12V) Discharge stop: 5.6V(6V) / 11.2V(12V) Discharge reconnect: 6.3V(6V) / 12.6V(12V) Working Temp:-10- +40° Weight:80g Dimensions: 8L x 3.7W x 2.2Hcm	ea $34.95 4+ $31.50 6+ $27.95 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This compact PWM solar charge controller is ideal for 6V & 12V battery systems and provides a max charge current up to 5A (suits solar panels up to 60W).
	12V 10A 120W PWM Waterproof Solar Charge C... N2008		Fully sealed in epoxy for reliable performance in harsh environments Rated to IP68 for dust and moisture protection Easy in line connection Tough aluminium extrusion case design Over charge protection Over discharge protection Over current protection Reverse polarity protection Short circuit protection.	ea $45.95 4+ $41.95 6+ $37.50 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This compact PWM 4 stage solar charge controller is ideal for 12V battery systems.
	12V 20A 240W PWM Waterproof Solar Charge C... N2009		Fully sealed in epoxy for reliable performance in harsh environments Rated to IP68 for dust and moisture protection Easy in line connection Tough aluminium extrusion case design Over charge protection Over discharge protection Over current protection Reverse polarity protection Short circuit protection.	ea $54.95 4+ $49.45 6+ $43.95 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This compact PWM 4 stage solar charge controller is ideal for 12V battery systems. 20A model.
	20A 12V/24V DC PWM Solar Charge Controller N2012	Instructions	Suits lead acid or gel battery systems Automatic fuse protection Battery overload & deep discharge protection Automatic 12/24V voltage selection Reverse polarity protection Short circuit protection Status LEDs Diode protection	ea $115.00 2+ $105.00 4+ $95.00 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	A basic solar charge controller for permanent installations of lead acid or gel battery solar panel systems. It features a 3 stage charging sequence (boost, float and equalise). LEDs are provided to indicate working status - normal, fault, overload and low battery. Suitable for 12V or 24V systems, the charger automatically detects the connected b
	Sealed MPPT 10A 12V Solar Charge Controller N2015	Instructions	Utilises Maximum Power Point Tracking (MPPT) circuitry Multi chemistry for lead acid batteries Over temperature & short circuit protection Under input voltage shutdown Battery under voltage shutdown Fully sealed IP67 rated design Suits 12V battery systems.	ea $66.95 4+ $60.00 6+ $53.50 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators.
	Sealed MPPT 20A 12V Solar Charge Controller N2016	Instructions	Utilises Maximum Power Point Tracking (MPPT) circuitry Suitable for lead acid batteries Over temperature & short circuit protection Under input voltage shutdown Battery under voltage shutdown Fully sealed IP67 rated design Suits 12V battery systems	ea $79.95 4+ $71.95 6+ $63.95 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators.
	12/24V 20A PWM Solar Charge Controller Wit... N2018	Instruction Manual	Suits lead acid or gel battery systems USB 2A charging output Automatic fuse protection Adjustable night load mode Adjustable battery charging/discharging voltages Automatic 12/24V voltage selection Reverse polarity protection Short circuit and overload protection Over temperature protection	ea $56.95 2+ $51.25 4+ $45.75 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	Featuring intelligent charge control, adjustable parameters, LCD screen and USB charging outputs this solar regulator represents outstanding value for under $100. It is suitable for permanent installations of lead acid and gel battery solar panel systems. The LCD allows for easy selection of charging parameters such as PV switch off voltage, load s
	12/24V 30A PWM Solar Charge Controller Wit... N2019D NEW	Instructions	Suits lead acid type batteries Suits lithium chemistry batteries, including Li-NiCoMn & LiFePO4. Adjustable daytime start, night off mode Auto battery identification Intelligent PWM charging Temperature compensation USB 2A charger (4 ports) Overload, reverse polarity, reverse discharge, over heat, under voltage protections	ea $77.50 2+ $69.75 4+ $62.00 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	Suitable for permanent installations of lead acid, gel battery and lithium chemistry (including Li-NiCoMn & LiFePO4) solar panel systems.
	12/24V MPPT Solar Charge Controller 20A N2024		Utilises Maximum Power Point Tracking (MPPT) circuitry USB 1A charging output Suits lead acid or gel battery systems Charge indicators Reverse polarity protection Short circuit and overload protection Over temperature protection	ea $159.00 2+ $145.00 4+ $129.00 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	These compact regulators utilise Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. This essentially allows you to get more power from your existing panels, or alternatively reduce the overall required panel wattage for new systems. It is suitable for permanent installations of
	12/24V MPPT Solar Charge Controller 20A N2024A	Instructions	Advanced MPPT technology Multi-chemistry design suits Sealed, Gel, Flooded Lead, Acid, LiFePO4, Li(NiCoMn)O2 type batteries Super fast tracking speed whilst ensuring efficiency Accurate Identification Reliable maximum input power 12/24V automatic voltage identification LCD display screen Various load controls Temperature sensor Suits lead acid, gel type and lithium chemistry batteries	ea $159.00 2+ $145.00 4+ $129.00 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This dual input design connects to a solar panel and your cars alternator (12 or 24V) to provide 3 stage charging for secondary batteries such as those used in campers, caravans and trades service vans/trailers. It is compatible with the latest smart alternators and start/stop systems found in modern vehicles.
	12/24V MPPT Solar Charge Controller 40A N2026A	Instructions	Advanced MPPT technology Multi-chemistry design suits Sealed, Gel, Flooded Lead, Acid, LiFePO4, Li(NiCoMn)O2 type batteries Super fast tracking speed whilst ensuring efficiency Accurate Identification Reliable maximum input power 12/24V automatic voltage identification LCD display screen Various load controls Battery temperature compensation Power statistics recording function Supports PC monitor, external display unit and other peripherals, real-time date view and parameter setting function Suits lead acid, gel type and lithium chemistry batteries	ea $239.00 2+ $215.00 4+ $195.00 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This dual input design connects to a solar panel and your cars alternator (12 or 24V) to provide 3 stage charging for secondary batteries such as those used in campers, caravans and trades service vans/trailers. It is compatible with the latest smart alternators and start/stop systems found in modern vehicles.
	Temperature Sensor Lead N2073		3M long cable with 3.5mm stereo plug Aluminum plate Probe :20X90mm. Temperature Min deg.C Cont’ -40 Temperature Max deg.C Cont’ 100 Operating Output Voltage: (25 C) 2.98 V Sensor Gain: 10mV/Deg C DYNAMIC Impedance Ohm: 0.6 MAXIMUM Reverse Current: 15mA MAXIMUM Forward Current: 10mA	ea $29.95 2+ $26.75 4+ $23.50 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	Optional Accessory to N 2071A, Temperature sensor automatically disconnects the charging circuit if the batteries overheat. An integrated circuit temperature sensor, sealed in Epoxy mounted on an aluminum plate probe for larger exposure of sensing area. It has a sensing temperature range of minus 40C to 100C . Application with charge co
	6A 12VDC PWM Night Switch Solar Charge Con... N2075	Brochure User Manual	Compact design Simple to install and use 6A charging current Reverse current protection Epoxy encapsulated Low voltage disconnect	ea $66.75 3+ $60.50 5+ $57.50 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	This unit operates as a solar charger by day which then switches on a load at night. It features auto-dusk detection circuit for activating the DC load output when night falls. It is suitable for sealed or wet cell batteries and utilises the latest in
	6A 12V DC PWM Solar Charge Controller N2077	Instructions	Compact design. Simple to install and use. 6A charging current. Reverse current protection. Epoxy encapsulated. Suitable for sealed or wet batteries.	ea $59.95 3+ $53.95 5+ $47.95 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	Operating as a simple and effective charger controller, this unit is suitable for sealed or wet cell batteries and utilises the latest in solid state MOSFET switching for reliable operation.
	6A 12V DC PWM Solar Charge Controller N2078			ea $41.00 per ea Northbridge,WA Balcatta,WA Cannington,WA Midland,WA Myaree,WA Joondalup,WA Auburn,NSW Springvale,VIC Airport West,VIC Virginia,QLD Adelaide,SA Delivery In Stock Low - Call	A simple solar charge controller offering 6A current input. It is suitable for sealed or wet cell batteries and is sealed in epoxy for reliable operation. Suitable for solar cells with an open circuit voltage between 14-30V DC. LED indicators show when unit is charging or battery is at full capacity. Suits 12V battery systems only. Size: 72 x 50 x