|
Description |
Downloads |
Specs |
Ordering |
|
 |
K9670A |
|
- Utilises a half rack 1RU size case
- 16x2 alphanumeric display
- Rotary encoder control
- 4 push buttons
- Compatible with Arduino UNO/mega boards
- 5 2A 5V relay outputs
- 8 opto isolated inputs
- On board reset and LEDs
- All main board pins broken out to header sockets
|
|
Developed in house by Altronics, this new revised MegaBox is an upgrade of our original K 9670 - adding space for two shields, plus FIVE 2A 5V relay outputs and eight opto isolated outputs. All UNO/Mega pins are broken out to header sockets for easy connection to other breakouts. |
 |
Z6313 |
|
- UNO R3 compatible board
- I2C1602 LCD
- Plastic packing box
- USB cable
- 3 pin sensor wires x 5
- Light sensor
- Triaxial accelerometer
- Sound Sensor
- LM35 temp sensor
- Smoke sensor
- Temp and humidity sensor
- Water level sensor
- Soil moisture sensor
- XY joystick module
- Ultrasonic sensors
- Mini Breadboard
- Acrylic plate
|
|
This kit includes an LCD readout for visualising data from a variety of included analog sensors. It is supplied with an Arduino UNO compatible board, USB cable, sensor connection leads and 10 breakout boards. The boards included ultrasonic distance detector, moisture sensor, water sensor, joystick, mic and accelerometer. |
 |
Z6520 |
|
- Voltage: 5V or 3.3V
- Max power consumption: 110mA at 5v
- Interface: SPI
- Pixel resolution: 128x64
- Display size: 2.7 inch
- Module size: 85x58x6.5mm
|
|
This display provides 128x64 pixels, which is highly suitable for the Arduino controller. Thus by using hardware SPI, the response can be very fast. Meanwhile the powerful "u8glib" library for Arduino makes it easy to use. |
 |
Z6315A NEW
|
|
|
|
A handy parts kit containing everything you need to start learning Arduino and building projects. Includes a huge selection of sensor boards, LEDs, pots, jumper wires, a breadboard, LCD screen and much more! |
 |
Z6560 |
|
- 11 levels of speaking speed
- Supports Chinese and english languages
- Both male and female voice supported
- Use the Serial ports of your Arduinos only
|
|
This Speech Synthesis Shield is designed to be easily stacked upon any standard arduinos. It uses a XFS5051CE speech synthesis chip from IFLYTEK which combines world leading technology and high degree of integration. |
 |
Z6244 |
|
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU Clock at 84MHz.
- 96KB of SRAM.
- 512KB of Flash memory for code.
- A DMA controller that can relieve the CPU from doing memory intensive tasks.
|
|
The Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. |
 |
Z6435 |
|
- Microcontroller Atmel ATmega32U4
- Touch IC Resurgent Semiconductor MPR121
- MP3 decoder IC VLSI Solution VS1053b
- Audio output 15mW into 32Ω via 3.5mm stereo socket
- Removable storage up to 32GB via micro SD card
- Input voltage 3.0V DC – 5.5V DC
- Operating voltage 5V DC
- Max. output current (5V rail) 400mA (100mA at startup)
- Max. output current (3.3V rail) 300mA
- LiPo cell connector 2-way JST PH series - pin 1 +ve, pin 2 -ve
- LiPo charge current 200mA
- Capacitive touch electrodes 12 (of which 8 can be configured as digital I/O)
- Digital I/O Pins 20 (of which 3 are used for the MPR121 and 5 are used for the VS1053b — the latter can be unlinked via solder blobs)
- PWM channels 7 (shared with digital I/O pins)
- Analogue input channels 12 (shared with digital I/O pins)
- Flash memory 32 kB (ATmega32U4) of which 4kB used by boot loader
- SRAM 2.5kB (ATmega32U4)
- EEPROM 1kB (ATmega32U4)
- Clock speed 16MHz (ATmega32U4), 12.288MHz (VS1053b)
- DC current per I/O pin 40mA sink and source (ATmega32U4), 12mA source / 1.2mA sink (MPR121)
- Analogue input resistance 100MΩ typical (ATmega32U4)
|
|
The Touch Board is a microcontroller board with dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as having 12 capacitive touch electrodes. It is based around the ATmega32U4 and runs at 16MHz from 5V. It has a micro USB connector, a JST connector for an external lithium po |
 |
Z6332 |
|
|
|
A GPS shield for Arduino featuring a 28dB high performance antenna and SD card slot. 3.3/5V input. |
 |
Z6270 ROHS
|
|
- Freescale MC13224V 32-bit ARM7 Processor
- Integrated 2.4GHz 802.15.4 transciever
- Up to 100mW Output Power
- 96k RAM
- Arduino Shield Compatible
- 12-bit ADC, 2 UARTS, I2C and SPI
- SNAPpy Interpreter (Python-like language)
|
|
A shield compatible development board featuring the Synapse SM700 wireless network module. Designed to set up wireless mesh networks with a 32-bit ARM7 processor & plenty of on-board memory. |
 |
ZW6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- HID support for keystrokes and mouse movement.
- Wi-FI and Bluetooth connectivity on board.
- Qwiic connector for I2C compatible sensors and actuators.
- LED matrix on board.
- Supports battery powered RTC.
|
|
The Funduino UNO R4 with WiFi is an Arduino compatible board integrating the powerful RA4M1 microcontroller with the robust wireless capabilities of the ESP32-S3 from Espressif. Additionally, it features an on-board 12x8 LED matrix, a Qwiic connector, a VRTC, and an OFF pin, making it an ideal choice for all your maker projects. |
 |
Z6502 |
|
- Power Supply: 4.5～5.5V
- Microcontroller: ST7920
- Resolution: 128×64
- Display Colour: Blue lit with white character
- View angle: 170 °C
- LCD module: STN
- Control interface: 8/4 bits Parallel (Default) or 3 bits serial (SPI)
- Module size: 93x70x22mm (3.7x2.8x0.87'"")
- Visuable size: 73x39mm (2.9x1.5'"")
|
|
This LCD module uses a 128x64 liquid crystal display that supports Chinese characters, English characters and even graphics. It is suitable for interactive work with Arduino.
|
 |
Z6342 |
|
|
|
Allows you to connect USB peripherals and mass storage devices to your Arduino. Uses the MAX3421E chipset. Fitted with stackable connectors. |
 |
Z6542 |
|
- Working Voltage: 3.3v or 5v
- Host Interface: UART
- Integrate PN532 NFC controller
- Supports ISO 14443A/MIFARE
- Supports ISO 14443B in reader/writer mode only
- Typical max operating distance for detecting NFC tags from 20 to 50mm depending on the antenna *size of the tag
- Serve for contactless communication at 13.56MHz
- Size: 11cm x 5cm
|
|
The NFC Module for Arduino is designed to extend this powerful feature for your project or application based on Arduino.It integrates a PN532 NFC controller from Philips.The driver interface for this product is UART interface of the microcontroller. |
 |
Z6527 |
|
- Support Arduino Mega2560 Directly inserted
- With Full-angle IPS TFT panel
- On Board level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board.
- Provided 12-examples with Arduino ,3-examples with STM32
- With SD Card Socket
- With SPI FLASH circuit
|
|
A 480x320 display shield for the Arduino Mega utilising the ILI9481 chipset. Ideal for projects requiring sensor monitoring. 5V/3.3V input. |
 |
Z6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- SWD connector for debugging.
- HID support for keystrokes and mouse movement.
|
|
Introducing the Funduino UNO R4 Minima compatible Arduino board. Equipped with the RA4M1 microprocessor, this board offers enhanced processing power, expanded memory, and more, all while maintaining the reliable UNO form factor and practical 5V operating voltage. Get ready for a remarkable upgrade! |
 |
Z6500 |
|
- Multi-function expansion board
- Compatible with Arduino
- Supports SPI Interface, IIC interfaces, SD card, TLC5940
|
|
This interface shield supports multi-interfaces, SPI, IIC and SD Card. |
 |
Z6495 NEW
|
|
- Non-contact detection, moving object detecting.
- This module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.
- Provide various frequency range standards: -UK,-F.
- Advanced low consumption PHEMT oscillator.
- Independent transmitting and receiving route, can get the big gain.
- High sensibility, high flexibility, low cost, operating distance is 15m.
- Single channel operation
|
|
The CDM324 is a 24GHz Millimeter Wave Radar Sensor Module designed for reliable non-contact motion detectionand moving object detection. |
 |
Z6319 NEW
|
|
- Large 3-digit display of measured temperature
- Operates in both a heating and cooling mode of operation
- Programmable settings for temp set point, temp hysteresis, compressor delay and temperature calibration.
- Waterproof NTC temperature sensor has -50 to +99.9°C measurement range with ±1°C accuracy
- Over temperature and sensor failure audible and visual alarm
- Unit temperature reading can be calibrated
- Relays switch up to 120/240VAC @ 10A or 15VDC @ 10A
- 12VDC module operation
|
|
The STC-1000 temperature controller is a self contained heating / cooling controller that operates on 12VDC and controls either AC or DC loads up to 10A max current. |
 |
Z6333X |
|
- The module is equipped with a ceramic antenna with super strong signal
- EEPROM power-off saves configuration parameter data
- With data backup battery
- With LED signal indicator
- Antenna size: 25*25mm
- Module size :25mm*35mm
- Installation aperture :3mm
- Default baud rate: 9600
|
|
Add GPS location to your Arduino/Pi project, aircraft or drone. 3.3/5V input. Includes 6x20mm ceramic antenna. |
 |
Z6316 NEW
|
|
- Easy to set up and pair - Android or iOS eWeLink app available for direct control.
- Onboard Bluetooth status indicator and relay indicator.
- With 2 optocoupler isolation, strong anti-interference ability.
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module.
- Compact board design.
- Module with diode effusion protection short response time
|
|
A combined relay and control board with the ability to switch on and off connected loads using an App on your phone via Bluetooth. The eWeLink app offers seamless power switching using your device when in range of the relay board (typically 10m). |
 |
Z6343 |
|
- Pin 1, sense a
- Pin 2, output 1, motor 1 -ve
- Pin 3, output 2, motor 1 +ve
- Pin 4, supply vs
- Pin 5, input 1, d8
- Pin 6, enable a, d9 (pwm)
- Pin 7, input 2, d11
- Pin 8, ground,
- Pin 9, logic vss
- Pin 10, input 3, d12
- Pin 11, enable b, d10 (pwm)
- Pin 12, input 4, d13
- Pin 13, output motor 2 -ve
- Pin 14, output motor 2 +ve
- Pin 15, sense b
|
|
Uses an L298 H-Bridge designed to drive inductive loads, such as relays, solenoids, DC and stepping motors. It can also drive two independent DC motors, controlling the speed and direction of each. Standard Arduino shield dimensions with analog and digital output headers. 5V input. |
 |
Z6493 NEW
|
|
- The PCA9685 offers 16 fully programmable PWM outputs with a 12-bit resolution, providing 4096 steps for precise duty cycle adjustments on each channel.
- The module uses the I2C bus for communication, ensuring easy integration with microcontrollers like Arduino or Raspberry Pi.
- Supports frequency control across all 16 channels, programmable between 24Hz and 1526Hz.
- The duty cycle (pulse width) can be fine-tuned from 0% to 100% for accurate output control.
- The on-board PWM controller manages all 16 channels independently, reducing processing load on the microcontroller compared to direct pin-based servo control.
- Multiple modules can be daisy-chained together. With up to 62 boards on a single I2C bus, you can control up to 992 servos using just two pins.
|
|
This 16 Channel PWM Servo Control Board is a versatile module that allows you to control up to 16 servos using only 2 pins via I2C communication. |
 |
Z6381A |
|
- Adopts industrial chip esp8266, esp-12f module with metal shielding Case, strong Anti-slip potential;
- Used as an independent commission for the development of esp8266, uploading an official to the team Firmware, open source nodemcu, etc.
- Can also be used as an independent development board for Arduino, use the same as Arduino Development Board.
|
|
An Arduino compatible development board featuring WiFi making it ideal for plug-and-play projects.The board also features its GPIO broken out, a full USB-serial interface, NodeMCU pre-flashed and a power supply all on the one breadboard-friendly package. |
 |
Z6371 |
|
- The L3G4200D is a low-power three-axis angular rate sensor able to provide unprecedented stablility of zero rate level and sensitivity over temperature and time. It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI).
- The sensing element is manufactured using a dedicated micro-machining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.
- The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the sensing element characteristics.
- The L3G4200D has a full scale of ±250/±500/ ±2000 dps and is capable of measuring rates with a user-selectable bandwidth.
- The L3G4200D is available in a plastic land grid array (LGA) package and can operate within a temperature range of -40 °C to +85 °C.
|
|
3-axis gyroscope, providing very high resolution (16 bit) measurements at up to 2000 dps. Measures how much your device is rotating around three axes within a selectable range. Ideal for gaming, and robotics applications. Includes headers. 3-5V input. |
 |
J0080 NEW
|
|
- Working Temperature: 0℃ - 40 ℃
- Motor voltage: 12VDC
- Motor current: 200-300mA
- Flow Rate : >80ml/min
- Tube Size : 5mm tube
- Pump Head Material : ABS
- Pump Pipe : Transparent silicone pipe
- Pulsations : Three roller
|
|
This 12V Peristaltic Water Dosing Pump can be used in a variety of applications. |
