Description Ordering
A4818 Dante Mic/Line 4 Input, 4 Output Dual Wallplate

Dante Mic/Line 4 Input, 4 Output Dual Wall...

A4818

Dante Interface 4 x Mic/Line Inputs, 4 x Outputs
A4460 4x8 Stereo Audio Switcher System

4x8 Stereo Audio Switcher System

A4460

Designed to distribute 4 stereo audio input sources to 8 stereo output zones, this system is ideal for use in function centres, hotels, meeting rooms and domestic homes etc. It sends audio sources from one room to another with total ease.
A4816 Dante Mic/Line 4 Input, 2 Output Dual Wallplate

Dante Mic/Line 4 Input, 2 Output Dual Wall...

A4816

Dante Interface 4 x Mic/Line Inputs, 2 x Line Outputs
A4831 Dante 2 Input 4 Output Converter Interface Box

Dante 2 Input 4 Output Converter Interface...

A4831

Interfaces 2 input and 4 output CSP UTP wallplates with Dante® systems
A5332 2 Channel 31 Band EQ With Feedback Detection

2 Channel 31 Band EQ With Feedback Detection

A5332

This professional unit delivers outstanding equalisation both in live or studio applications. Invaluable for counteracting poor room or venue acoustics. The design employs ultra low noise audio amplifiers with high quality components for outstanding sou
A3164 Audio Over IP Dante POE Receiver

Audio Over IP Dante POE Receiver

A3164

This device is designed to receive two channels audio signal from the Dante network, and converts to analogue RCA outputs. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to receive the low latency of signal from other devices which already connected on the same Dante network.
A3165 Audio Over IP Dante POE Transmitter

Audio Over IP Dante POE Transmitter

A3165

This device is designed to provide two channels audio signal to the Dante network by the Euro terminal input. Simply use Cat5 cable to connect the RJ45 port to an Ethernet switch, and using "Dante controller" to route the low latency of signal to other devices which already connected on the same Dante network.
A4830 Dante Input/Output Converter Interface Box

Dante Input/Output Converter Interface Box

A4830

Interfaces 1 input and 1 output CSP UTP wallplates with Dante® systems.
A4930 Four Output Microphone/Line Hub

Four Output Microphone/Line Hub

A4930

This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output.
A2080B Selection Panel 10 Zone PA

Selection Panel 10 Zone PA

A2080B

Enables the control of paging and background music over 10 speaker zones. An incoming signal is thus selectable to the zones required. An &ldquoall call&rdquo button is provided. The design allows multiple units to be connected together to create an infinite number of zones.
A2080C Selection Panel 10 Zone PA

Selection Panel 10 Zone PA

A2080C

Enables the control of paging and background music over 10 speaker zones. An incoming signal is thus selectable to the zones required.
A4825 Dual 3 Pin XLR Input UTP Balun Wallplate

Dual 3 Pin XLR Input UTP Balun Wallplate

A4825

This Dual 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4937 3 Input XLR Mic/Line Pre-Amp Bluetooth Wallplate

3 Input XLR Mic/Line Pre-Amp Bluetooth Wal...

A4937 NEW

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.
A4935 3 Input XLR Mic/Line Pre-Amplifier Wallplate

3 Input XLR Mic/Line Pre-Amplifier Wallplate

A4935

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier.
A4832 Local Input/Output Hub Interface Box

Local Input/Output Hub Interface Box

A4832

A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources.
A4835 Active Three Pair Audio Signal Distribution Receiver

Active Three Pair Audio Signal Distributio...

A4835

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
A4928 Single Output Microphone/Line Hub

Single Output Microphone/Line Hub

A4928

A single mic/line output box designed to operate with A 4931 and A 4932 zone connection boxes.
A4932 Balanced Microphone/Line Pre Amplifier

Balanced Microphone/Line Pre Amplifier

A4932

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4824 3 Pin XLR & Stereo RCA Input UTP Balun Wallplate

3 Pin XLR & Stereo RCA Input UTP Balun Wal...

A4824

This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4931 Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4931V Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931V

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4826 3 Pin XLR Balanced & Stereo RCA Output UTP Balun Wallplate

3 Pin XLR Balanced & Stereo RCA Output UTP...

A4826

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4821 Stereo RCA and 3.5mm Jack Input UTP Balun Wallplate

Stereo RCA and 3.5mm Jack Input UTP Balun ...

A4821

This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4828 Stereo RCA Jack Output UTP Balun Wallplate

Stereo RCA Jack Output UTP Balun Wallplate

A4828

This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4906 Mic/Line/100V Input to Line +24V Switched Output

Mic/Line/100V Input to Line +24V Switched ...

A4906

The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier.

All prices include GST