Description Ordering
A4818 Dante Mic/Line 4 Input, 4 Output Dual Wallplate

Dante Mic/Line 4 Input, 4 Output Dual Wall...

A4818

Dante Interface 4 x Mic/Line Inputs, 4 x Outputs
A4820 3 Pin XLR Line/Balanced Input UTP Balun Wallplate

3 Pin XLR Line/Balanced Input UTP Balun Wa...

A4820

This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4821 Stereo RCA and 3.5mm Jack Input UTP Balun Wallplate

Stereo RCA and 3.5mm Jack Input UTP Balun ...

A4821

This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4822 Stereo RCA Input UTP Balun Wallplate

Stereo RCA Input UTP Balun Wallplate

A4822

This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4824 3 Pin XLR & Stereo RCA Input UTP Balun Wallplate

3 Pin XLR & Stereo RCA Input UTP Balun Wal...

A4824

This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4825 Dual 3 Pin XLR Input UTP Balun Wallplate

Dual 3 Pin XLR Input UTP Balun Wallplate

A4825

This Dual 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4826 3 Pin XLR Balanced & Stereo RCA Output UTP Balun Wallplate

3 Pin XLR Balanced & Stereo RCA Output UTP...

A4826

This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4827 3 Pin XLR Line/Balanced Output UTP Balun Wallplate

3 Pin XLR Line/Balanced Output UTP Balun W...

A4827

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4828 Stereo RCA Jack Output UTP Balun Wallplate

Stereo RCA Jack Output UTP Balun Wallplate

A4828

This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4830 Dante Input/Output Converter Interface Box

Dante Input/Output Converter Interface Box

A4830

Interfaces 1 input and 1 output CSP UTP wallplates with Dante® systems.
A4831 Dante 2 Input 4 Output Converter Interface Box

Dante 2 Input 4 Output Converter Interface...

A4831

Interfaces 2 input and 4 output CSP UTP wallplates with Dante® systems
A4832 Local Input/Output Hub Interface Box

Local Input/Output Hub Interface Box

A4832

A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources.
A4834 Active Three Pair Audio Signal Distribution Transmitter

Active Three Pair Audio Signal Distributio...

A4834

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
A4835 Active Three Pair Audio Signal Distribution Receiver

Active Three Pair Audio Signal Distributio...

A4835

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
A4903A 100V Line to Low Level Adapter

100V Line to Low Level Adapter

A4903A

This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier.
A4904 1 In to 2 Out Audio Splitter

1 In to 2 Out Audio Splitter

A4904

This compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity.
A4905 Mic/Line Pre-Amplifier to Line Level Out Converter

Mic/Line Pre-Amplifier to Line Level Out C...

A4905

This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary
A4906 Mic/Line/100V Input to Line +24V Switched Output

Mic/Line/100V Input to Line +24V Switched ...

A4906

The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier.
A4928 Single Output Microphone/Line Hub

Single Output Microphone/Line Hub

A4928

A single mic/line output box designed to operate with A 4931 and A 4932 zone connection boxes.
A4930 Four Output Microphone/Line Hub

Four Output Microphone/Line Hub

A4930

This Microphone/Line Hub is designed to accept audio from up to four A 4931 Mic/Line Preamp wallplates. The Hub has a dedicated output for each wall plate, with front mounted volume controls for each output.
A4931 Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4931V Microphone/Line Pre Amplifier Wallplate

Microphone/Line Pre Amplifier Wallplate

A4931V

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4932 Balanced Microphone/Line Pre Amplifier

Balanced Microphone/Line Pre Amplifier

A4932

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4935 3 Input XLR Mic/Line Pre-Amplifier Wallplate

3 Input XLR Mic/Line Pre-Amplifier Wallplate

A4935

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier.
A4937 3 Input XLR Mic/Line Pre-Amp Bluetooth Wallplate

3 Input XLR Mic/Line Pre-Amp Bluetooth Wal...

A4937 NEW

These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.

All prices include GST