Rack Panels
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
1U 19" Dual Gooseneck LED Lamp Rack PanelH5195 |
| This recessed rack mounting dual gooseneck light is ideal for illuminating equipment within a rack. The flexible goosenecks enables the light to be directed where desired. It includes an inbuilt dimmer to adjust the light intensity. Goosenecks length app | ||
 |
Rack Mounted Surge Protected 10 Way Power ...P8167 |
|
| The neat solution to supplying mains power to your mounted equipment. | |
 |
2U / 2RU Black Anodised Aluminium 19" Rack...H5132 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
Rack Mounted Surge Protected 7 Way Power B...P8166 NEW |
|
| The neat solution to supplying mains power to your mounted equipment. | |
 |
Half Rack 19" Rack BracketH4990 |
|
| H 4990 allows the mounting of two "half rack" units into a 19" 1RU space on a rack frame. Depth: 90mm. Note: Pictured with product. | |
 |
18U Rack Cable Support TrayH5578 |
|
| ||
 |
1U 19" Rack Support Bracket PairH5161 |
|
| These simple to install brackets provide rear or front support for equipment when installing into a rack. For instance when bolting a heavy amplifier into a rack, these brackets can hold the unit level allowing one person to easily bolt the amplifier into | |
 |
3U 4 x Wall Plate 19" Rack Mount PanelH5157 |
| This 3RU plate provides mounting for up to 4 standard electrical wall plates. This allows installers to mount zone control wall plates (such as the Redback A 4490 series) into a rack environment. Supplied with three blanking plates and hardware. | ||
|
3U Black Anodised Aluminium 19" Rack PanelH5133 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces in rack frames. All models feature integral ribs on the rear for extra strength and rigidity. | |
 |
1U Cable Support 19" Rack PanelH4605 |
| This 19" cable support bar is great for organising and supporting all your interconnect cables to the patch panels. Cables can be anchored to the panel by using cable ties to secure the cables to the supports. Black powdercoated finish. | ||
|
15U Rack Cable Support TrayH5575 |
|
| These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. | |
 |
2U Enclosed Cable Hanger 19" Rack PanelH4607 |
| Slotted panels for management of patch leads in IT and comms racks. Durable black powdercoated finish. Features plastic slotted tabs and slide on rear panel cover for a neat finish. 2 RU | ||
|
12U Rack Cable Support TrayH5572 |
|
| These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. Suits all Altronic | |
 |
2U 24 Way 'D' Series Connector 19" Patch R...H5173 |
|
| Pre-punched with either 12(1U) or 24(2U). Tough black powdercoated finish. H 5171 & H 5173 suit the following connectors: P 0881 Plastic 3 Pin Male XLR P 0883 Plastic 3 Pin Female XLR P 0833 Neutrik HDMI Chassis D Series Silver. P 0850 Neutrik 3 | |
 |
1U 12 Way 'D' Series Connector 19" Patch R...H5171 |
|
| Pre-punched with either 12(1U) or 24(2U). Tough black powdercoated finish. H 5171 & H 5173 suit the following connectors: P 0881 Plastic 3 Pin Male XLR P 0883 Plastic 3 Pin Female XLR P 0833 Neutrik HDMI Chassis D Series Silver. P 0850 Neutrik 3 Pin | |
 |
1U XLR 12 Way Patch Panel 19" Rack PanelH5170 |
|
| Pre-punched with either 12(1U) or 24(2U). Tough black powdercoated finish. H 5170 & H 5172 suit the following connectors: P 0804 XLR 3 Pin Female P 0824 XLR 5 Pin Female P 0904 Amphenol XLR 3 Pin Female P 0924 Amphenol XLR 5 Pin Female Note: Thi | |
 |
2U XLR 24 Way Patch Panel 19" Rack PanelH5172 |
|
| Pre-punched with either 12(1U) or 24(2U). Tough black powdercoated finish. H 5170 & H 5172 suit the following connectors: P 0804 XLR 3 Pin Female P 0824 XLR 5 Pin Female P 0904 Amphenol XLR 3 Pin Female P 0924 Amphenol XLR 5 Pin Female Note: Thi | |
 |
2U Cable Hanger 19" Rack PanelH4603A |
| Keeps your leads neat and tidy with this cable support panels. They will not only take the strain off the connections, but also give you a means to organise your cables so you can find the lead you want quickly. | ||
 |
1U Enclosed Cable Hanger 19" Rack PanelH4606 |
| Slotted panels for management of patch leads in IT and comms racks. Durable black powdercoated finish. Features plastic slotted tabs and slide on rear panel cover for a neat finish. 1 RU | ||
 |
Half Rack Metal In Fill Panel to Suit H4990H4992 |
| H4991 is used to fill in the unused section when only one unit is fitted to the H4990. | ||
 |
2U / 2RU Vented Snap In Steel 19" Rack Bla...H5150 |
| A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. Ideal for any 19" rack system which requires additional airflow to help keep equipment cool. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inward | ||
 |
3U / 3RU Raw Aluminium 19" Rack Blanking P...H5113 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
1U / 1RU Raw Aluminium 19" Rack Blanking P...H5111 |
|
| A 1RU raw aluminium 19 inch rack blanking panel. Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. Integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
2U / 2RU Raw Aluminium 19" Rack Blanking P...H5112 |
|
| A 2RU raw aluminium 19 inch rack blanking panel. Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. Integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
6U / 6RU Black Steel 19" Rack Blanking PanelH5146A |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. | ||
 |
1U / 1RU Brush Entry Cable Snap In 19" Rac...H5177 |
| Provides internal protection for racks from dust and debris whilst still allowing terminated cables to enter for quick connection when you need it. | ||
 |
2U / 2RU Vented Black Steel 19" Rack Blank...H5155A |
| 2 Unit vented panel for improving rack ventilation around hot equipment. Powdercoated black. | ||
 |
1U Cable Hanger 19" Rack PanelH4601A |
| Keeps your leads neat and tidy with this cable support panels. They will not only take the strain off the connections, but also give you a means to organise your cables so you can find the lead you want quickly. | ||
 |
1U / 1RU Black Steel Reinforcement 19" Rac...H5160 |
| Vented panel, specifically designed to add rigidity to our rack frames. Pre-drilled with extra mounting holes to install into the top and bottom of the rack frames. Tough powdercoated finish. | ||
 |
Half Rack Plastic Blanking Panel to Suit H...H4993 |
|
| H4993 is used to fill in the unused section when only one unit is fitted to the H4990. | |
 |
19" 1U Rack Panel Cable SupportH4602 |
| This 19" cable support panel is great for organising and supporting all your interconnect cables to the patch panels. Cables can be anchored to the panel by using cable ties.. Black powdercoated finish. Includes 10 hook and loop cable ties. | ||
 |
1U / 1RU Brush Cable Entry 19" Rack Blanki...H5179 |
| Provides internal protection for racks from dust and debris whilst still allowing terminated cables to enter for quick connection when you need it. Brush opening size 28H x 388Wmm. | ||
 |
4U / 4RU Black Steel 19" Rack Blanking PanelH5144A |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. | ||
 |
1U / 1RU Vented Snap In Steel 19" Rack Bla...H5149 |
| A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. Ideal for any 19" rack system which requires additional airflow to help keep equipment cool. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inward | ||
 |
3U / 3RU Snap In Steel 19" Rack Blanking P...H5138 |
| A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. | ||
 |
1U 2 Way 'D' Series Connector 19" Patch Pa...H5168 |
|
| Pre-punched 1RU rack panel with two sets of D series compatible mounting holes. This panel is ideal for test connections in 19" rack systems. Tough black powder coated finish. | |
 |
3U 3x120mm Fan 19" Rack PanelH5185A |
| Pre-punched with provision to suit 3 x 120mm fans. Tough powdercoated finish. Fans not supplied. | ||
 |
Blanking Plate to Suit H 5171 / H 5173 Pk6H5175 |
| Blanking panel for H 5171 and H5173 Pk. 6 | ||
|
Blanking Plate to Suit H 5170 / H 5172 Pk6H5174 |
| Blanking panel for H 5170 and H5172 Pk. 6 | ||
 |
1/2U Cable Support 19" Rack BarH4604 |
| This 19" cable support bar is great for organising and supporting all your interconnect cables to the patch panels. | ||
 |
1U / 1RU Vented Black Steel 19" Rack Blank...H5156 |
| 1 Unit vented panel for improving rack ventilation around hot equipment. Powdercoated black. | ||
 |
1U / 1RU Vented Black Steel 19" Rack Blank...H5154 |
| 1 unit (44mm) high. Ideal for any 19" rack system which requires additional airflow to help keep equipment cool. | ||
 |
1U 1 Way 'D' Series Connector 19" Patch Pa...H5167 NEW |
|
| Pre-punched 1RU rack panel with single set of D series compatible mounting holes. This panel is ideal for test connections in 19" rack systems. Tough black powder coated finish. | |
 |
3U / 3RU Black Steel 19" Rack Blanking PanelH5143A |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. | ||
 |
2U / 2RU Blank Snap In Steel 19" Rack Blan...H5137 |
| A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. | ||
 |
1U / 1RU Black Steel 19" Rack Blanking Pan...HA5141 |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. Screen printed in safety yellow. | ||
 |
Half Rack Desk Bracket PairH4991 |
| H 4992 enables a half rack unit to be mounted beneath a desktop or dash. | ||
 |
2U / 2RU Black Steel 19" Rack Blanking PanelH5142A |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. | ||
 |
1U / 1RU Snap In Steel 19" Rack Blanking P...H5136 |
| A real time saver for the installer, these snap in rack panels provide instant in-fill between equipment in 19" rack systems. They require no cage nuts, bolts or tools and are easily removed and relocated if required by pushing the two pressure clips inwards. Coated in a hard wearing stippled black powdercoat. | ||
 |
1U / 1RU Black Steel 19" Rack Blanking PanelH5141A |
| Manufactured from 1mm steel and finished in a textured powder coat. The top and bottom edges of each panel have a return for added rigidity. |
Designed & manufactured in Australia.
