Microphones
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Windsock to suit C8914C0348 |
| Spare windsock to suit | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
Black Gooseneck Microphone BaseC0421 ROHS |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base | ||
 |
Natural Gooseneck Microphone BaseC0420 |
| Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base | ||
 |
Spring Loaded Microphone HolderC0405 |
| Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
22mm Flexible Microphone HolderC0402 |
| Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Microphone HolderC0401 |
| Standard type mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. | ||
 |
Microphone Mini Tripod StandC0491 |
| Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread. | ||
 |
Large Wireless Microphone HolderC0404 ROHS |
| Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. | ||
 |
Windsock to suit C0361C0347 |
| Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. | ||
 |
Black desk Mount XLR Microphone SocketC0431 ROHS |
| Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black. | ||
 |
330mm Natural Gooseneck Microphone ExtensionC0410 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. | ||
|
450mm Natural Gooseneck Microphone ExtensionC0412 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome. | ||
 |
300mm Black Gooseneck Microphone ExtensionC0411 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 300mm Black. | ||
 |
Carry Bag To Suit Microphone Floor StandsC0513 |
| Heavy duty nylon zip lock bag specially designed to protect your microphone stands from the rough treatment dished out by life on the road. Features a convenient adjustable carry strap. | ||
 |
3 pin XLR Horizontal Steel Microphone Wall...C0442 |
| 3 Pin Horizontal Mount Stainless Steel Plates with 1 x XLR skt | ||
|
450mm Black Gooseneck Microphone ExtensionC0413 |
| Microphone gooseneck incorporating 5/8" thread male to female. Matching bench mount bases C 0420/21. 450mm Black. | ||
 |
3 Microphone Holder CrossbarC0400 |
| Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar. | ||
 |
3 pin XLR Horizontal Microphone WallplateC0446A |
|
| 3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 Pin XLR Horizontal Microphone WallplateC0444 |
|
| 3pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Black 3 pin XLR Horizontal Microphone Wall...CB0446 |
|
| 3pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
5 pin XLR Horizontal Microphone WallplateC0456A |
|
| 5pin XLR microphone connector mounted horizontally on a dual face wall plate. "One-Shot" versions with screw terminal connections for quick and easy connection on site. | |
 |
Black 5 pin XLR Horizontal Microphone Wall...CB0456 |
|
| 5pin XLR microphone connector mounted horizontally on a HPM wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 pin XLR Dual Horizontal Steel Microphone...C0447 |
| 3 Pin Horizontal Mount Stainless Steel Plates with 2 x XLR skts | ||
 |
Maono AU-402 Lapel Presenters Microphone 3...D0982 |
|
| The Maono AU-402 lapel/lavalier presenters microphone offers excellent audio quality for recording YouTube videos, live demonstrations, lectures or interveiws where a handheld microphone would be inconvenient. | |
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
Microphone Stand Tripod W/HolderC0493 |
| Robust mic stand with fold-up legs and adjustable centre stem. With standard 5/8" thread and mic holder. Height adjustable from 95mm to 150mm. | ||
 |
CB Type Curly 0.75m Microphone Lead With B...C0330B |
| 0.75m curly cable to suit CB fist type microphone. Bare end connection for terminating to OEM equipment or with the connector of your choice. | ||
 |
Gooseneck Shock Mount Microphone BaseC0484 |
| Flush mount friction fit gooseneck base. Suitable for C 0410-C 0413 goosenecks. Mounting hole size: 50.5mm. | ||
 |
Maono AU-B01 Desktop Microphone Arm StandC0506 |
|
| This Desktop Microphone Arm Stand is an ideal solution for anyone working with voice-related hobbies such as podcasting, studio work or streaming. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...C0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
Dual 3 Pin XLR Horizontal Microphone Wallp...CB0448 |
|
| Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | |
 |
3 pin XLR Wallplate with Microphone ClipC0449 |
|
| This 3 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. | |
 |
3 Pin XLR Microphone Shock Mount BaseC0482 |
| The elegant modern design of this base makes it ideal for use in conference rooms, board rooms, podiums, pulpits, etc. The rubber suspension of the XLR socket minimises shock or mechanical noise being transmitted to the microphone. | ||
 |
5 pin XLR White Wallplate with Microphone ...C0458 |
| This 5 Pin XLR wall plate are fitted with a clip for holding supermarket microphones. | ||
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | ||
 |
5 Pin XLR Black Wallplate With Microphone ...CB0458 |
| This 5 Pin XLR wall plate is fitted with a clip for holding supermarket style microphones (C0325 & C0326). | ||
 |
Microphone Desk StandC0500 |
| Diecast base, telescopic height adjustment from 220mm to 380mm. Weight 1.4kg. 5/8" mic holder threaded adaptor included. | ||
 |
3 pin XLR Horizontal Microphone Wallplate ...PC0446 NEW |
| 3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
5 pin XLR Horizontal Microphone Wallplate ...PC0456 NEW |
| 5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
3 pin XLR Black Horizontal Microphone Wall...PC0446B NEW |
| 3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
Maono AU-100 Lapel Presenters Electret Mic...D0984 |
|
| The Maono AU-100 lapel/lavalier presenters microphone offers excellent audio quality for recording YouTube videos or live demonstrations where a handheld microphone would be inconvenient. | |
 |
5 pin XLR Black Horizontal Microphone Wall...PC0456B NEW |
| 5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. | ||
 |
5 Pin XLR CB Type Balanced MicrophoneC0334 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
Wireless Lapel Microphone To Suit USB-C De...D0986 |
|
| This product is a smart wireless lapel microphone that provides professional quality recordings. | |
 |
Microphone Tie Clip Lavalier for C7195A/B/...C7197A |
| Lapel microphone to suit C7195A, C7195B and C7195C beltpack. | ||
 |
Lapel Condenser MicrophoneC0398 |
|
| A miniature electret lapel microphone with integral clip. Supplied with a balanced lead with mini 3 pin XLR plug. Features excellent pickup characteristics, dynamic range and requires phantom power (see C 0358). Perfect for lecturers, spruikers, presente | |
 |
Microphone Banquet Type Desk StandC0505B |
|
| Telescopes both vertically and horizontally. Swivel adjustment on horizontal arm. 5/8" thread adaptor supplied. Heavy cast base. Compatible with both 3/8" and 5/8" thread mounts | |
 |
Microphone Banquet Type Desk StandC0505A |
| Telescopes both vertically and horizontally. Swivel adjustment on horizontal arm. 5/8"" thread adaptor supplied. Heavy cast base. | ||
 |
Drop-Proof 600 Ohm Handheld MicrophoneC0383 ROHS |
|
| This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala | |
 |
Wireless Lapel Microphone To Suit iPhoneD0987 |
| This product is a smart wireless lapel microphone that provides professional quality recordings. | ||
 |
Microphone Tie Clip Mini XLR LavalierC8907 |
|
| The Redback Lapel microphone is designed to provide clear microphone pick-up in a discrete package. Incorporating a high definition microphone insert for crystal clear pickup of speech.The microphone simply clips onto your garment and plugs into the Redba | |
 |
Phantom Power Supply with Mini XLRC0358 |
| Powered by 1 AA battery, this module provides phantom power for mics equipped with a 3 pin mini XLR plug. A handy 'bass cut' switch is provided, giving the user ability to reduce breath and movement noise. It provides a standard 3 pin XLR output for conne | ||
 |
145cm Microphone Stand Diecast Round BaseC0512A |
|
| Sturdy telescopic stem with friction grip adjustment. Includes screw adaptor attachment (5/8") for mic holder etc. 80cm to 145cm | |
 |
Maono AU-GM31 USB Gaming MicrophoneD0981 |
|
| This omnidirectional microphone provides quality audio for gaming streams, YouTube recording and video calls. It features an adjustable gooseneck in a paging console style desktop case. | |
 |
Lightweight Presenter 3.5mm Microphone Hea...C7116 |
| A comfortable presenters headset microphone for use with equipment with 3.5mm TS input. Fitted with braided lead for added durability and adjustable boom mic for excellent audio pick up. | ||
 |
154cm Microphone Stand Fold-up LegsC0511A |
| Sturdy telescopic stem with friction grip adjustment and foldup legs. Includes screw adaptor attachment (5/8"") for microphone holder etc. Height adjusts from 96 to 154cm | ||
 |
USB Conference MicrophoneD0985 |
|
| It plugs into your laptop via USB type C connection and provides clear and crisp audio for group conferencing and one on one communications. | |
 |
Desktop Phantom Power SupplyC0357 |
|
| A compact single channel phantom power supply with 3 pin XLR female balanced input and 3 pin XLR male balanced 48V output. Includes power supply. Size: 88W x 47H x 92Dmm | |
 |
Lectern Dynamic Low Impedance MicrophoneC0370 |
|
| This microphone features speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits a | |
 |
Microphone Floor Stand With BoomC0515A |
| Sturdy telescopic stem with friction grip adjustment and foldup legs. Includes screw adaptor attachment (5/8") for microphone holder etc. Height adjusts from 96 to 160cm with 70cm adjustable boom. | ||
 |
Lecture Light Weight Microphone BeigeC8914 |
|
| A lightweight beige coloured microphone designed for presenters, entertainers etc. Designed to sit around your ear comfortably even when used for long periods. | |
 |
Microphone Headset for C7316 / C8810C7326A |
| Headset microphone to suit C7316 beltback and C8810 tour guide system. | ||
 |
Digital Voice Recorder 32GBX0705A |
|
| This quality voice recorder features a sturdy diecast metal case for recording CD quality audio where ever you may need it. | |
 |
Microphone Headset for C7195B & C7195CC7198B |
| Headset microphone to suit C7195B and C7195C beltbacks. | ||
 |
Dynamic Screw Mount Gooseneck MicrophoneC0363 |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id | |
 |
Studio Quality Entertainers Handheld Unidi...C0392 |
|
| This fine quality microphone has been styled on the famous Shure&trade Bros SM58. In our opinion the reproduction is every bit as good as the genuine article. Housed in a sturdy diecast body and fitted with a silent action reed type on/off switch. | |
 |
5 Pin XLR Handheld Supermarket Paging Mic...C0325 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Dynamic Lectern MicrophoneC0373 |
|
| This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some | |
 |
Lecture Light Weight Microphone HeadbandC8913B |
|
| A lightweight microphone designed for hands-free use. The high definition microphone insert provides crystal clear speech pickup. It is designed for non-vigorous activity. Fantastic for lecturers, spruikers or live demonstrations. The microphone s | |
 |
90° 5 Pin XLR Handheld Supermarket Pagin...C0326 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
5 Pin XLR Desk Paging MicrophoneC0379 |
|
| This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with 5 pin XLR connector. Includes a PTT mute switching pair. | |
 |
3 Pin XLR Desk Paging MicrophoneC0377 |
|
| This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity. Fitted with a 2 metre lead and terminated with either a 3 pin XLR, 5 pin XLR or 5 pin DIN connector. The 5 pin XLR and 5 pin DIN type conn | |
 |
Maono AU-902 USB Cardioid Condenser Podcas...D0980 |
|
| This quality condenser desktop microphone by Maono provides high quality audio recording for voice chat, YouTube streaming, podcast recording, live streaming and more! AU-902 | |
 |
3 Pin XLR Handheld Supermarket Paging Mic...C0324 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Professional Handheld Unidirectional Dynam...C0388 |
|
| This excellent professional dynamic microphone is suitable for the most demanding vocal applications. It allows performers to deliver vocal power and clarity even in the most acoustically adverse venues. | |
 |
Dynamic Insert Gooseneck PTT MicrophoneC0354 |
|
| A high performance dynamic microphone with in-built PTT switch in the head for paging systems. Complete with flexible gooseneck and built in 3 pin male XLR connector, it is ideal for paging consoles and general announcing requirements in factories, warehouses, food outlets and venues. | |
 |
Redback Phantom Powered Lectern MicrophoneC0369 ROHS |
|
| This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It is ideal for installations requiring the use of a high performance non-obtrusive microphone. The slimline design of this mic | |
 |
Electret Shotgun MicrophoneC0361 |
|
| This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju | |
 |
Gooseneck Supermarket Paging MicrophoneC0327 |
|
| This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. | |
 |
Phantom Powered Choir MicrophoneC0356 |
|
| This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant | |
 |
Boundary Mic Pro ElectretC0351A |
|
| This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o | |
 |
Desk Paging Microphone PTT/PTLC0375 |
|
| An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock | |
 |
Maono Caster Lite Podcasting Console & Mic...D0990A |
|
| The Caster Lite package is a podcast production studio designed to work with smartphones, tablets and computers. It is plug-and-play on iOS, Android, Windows and MacOS with no additional drivers required. | |
 |
Aerobics Microphone HeadbandC8911A |
|
| The Redback Sports Headband Microphone is designed to provide trouble free performance even through the most vigorous of workouts. A semi-rigid gooseneck ensures the microphone remains steady during heavy exercise and is molded to fit comfortably over t |
Designed & manufactured in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.
All prices include GST