|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4582 |
|
- 2U 19" rack mount
- Monitors up to 10 100V line amplifiers
- Analogue VU output level display
- No power required
- Built in monitor speaker
- Speaker volume control
- Minimal circuitry for low noise
|
|
A handy aid to test and adjust 100V line PA amplifier output levels. Capable of monitoring 10 individual amplifiers (electrically isolated from each other to prevent cross talk). Audible and visual monitoring is available from the built in speaker and VU |
 |
A4512 |
|
- Mains failure battery backup operation: With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger is specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.
|
|
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance. |
 |
A4500C |
|
- MP3 bell, prebell & music timing outputs.
- Emergency tones conform to AS 1670.4.
- Random play for prebell and music.
- Easy PC based timing event setup.
- Remote triggering of alert, evac and bell.
- Provision for connection to A4660 touchscreen paging console.
- Switched 24VDC out for bell, alert/evac.
- Pluggable screw terminal connections.
- Auxiliary level output.
- Battery backup of current time.
- 24V DC operation.
- Standard 1U 19” rack mount case.
- Suitable for any amp with an aux input.
- 10 Year Warranty
- Australian Designed and Manufactured
- Includes Power Supply
|
|
A weekly timer and evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 200 “event” switching times are available through the timing functions. Each event can be set to turn on from 1 sec up to 24 hours. |
 |
A1709 |
|
- Powered by 24V DC
- 50 event times
- 4 outputs
- Manual override
- LCD readout
- Switching time between 1 second and 24 hours
- Stylish 1RU half rack case
- Includes Power Supply
|
|
A versatile timer which has four switched 24V outputs and four closing contacts which activate simultaneously. It permits a total of 50 event switching times. Each can be set to turn on any single day of the week or on multiple days for up to 24 hours. |
 |
A4577 |
|
- Six monitored Inputs/triggers.
- 12 to 30V DC powered.
- Audible alert by buzzer.
- Visual alert by LED (individual LED per trigger).
- LEDs stay illuminated until trigger is deactivated.
- Cancel switch to stop audible alert.
- Pluggable terminal block for Triggers and DC in.
|
|
Designed to operate on 12 to 30VDC. This six input wall plate will sound a buzzer and
illuminate a specific LED when an input is activated/triggered by a closing contact. A
Cancel button allows the buzzer to be switched off whilst the LED indicator rema |
 |
A4506 |
|
- With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger is specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.
|
|
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance. |
 |
A4505C |
|
- MP3 for bell, prebell & music timing output.
- Emergency tones conform to AS 1670.4
- Random play of MP3 for prebell and music triggers.
- Easy PC based timing event setup
- Local & remote triggering of lockdown, fire and bell.
- Provision for connection to A4660 touchscreen paging console.
- MP3 voice over message (available in the lockdown and the fire cycle)
- Switched 24VDC outputs
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- 1RU 19” rack case
- Suitable for any amplifier with aux input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. For scheduled announcements a total of 200 “event” switching times are available through the timing functions. |
 |
A1982B |
|
|
|
Megaphone fitted with an alert/evac tone generator. The required function (alert/evac/megaphone) is selected via a toggle switch and is activated by pressing the trigger. To recharge batteries (NiMH batteries only) simply plug in the included AC plugpack. It requires 15 hours to fully charge. Rechargeable batteries sold separately. |
 |
A2078B |
|
-
 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A 4565 or A 4574 alert/evac unit to be activated remotely. Featuring alert, evacuation and cancel buttons with protective “flip up” covers to prevent accidental operation. Connects to main unit via multi core cable (7 core). |
 |
A2081 |
|
|
|
Allows the A 4574, A 4500A and A 4565 units to be activated remotely. Featuring alert, evacuation, chime and cancel buttons with protective “flip up” covers to prevent accidental operation.
|
 |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
A4565A |
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A4597 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This remote wallplate interfaces with a building fire evacuation control board to offer simple fire alarm test triggering. |
 |
A2096 |
|
- Selectable line impedance 600Ω or 4.7kΩ
- Separate speaker for call tone
- Simple two wire connection
- Designed to comply with AS2220.1
- Includes wall mounting bracket
- 80db call tone
- 73mm overall height with the spacer and bracket removed
|
|
Designed specifically for use in emergency warning systems. Warden intercom points (WIPs) are used to communicate between floor wardens and the main emergency evacuation panel. When the handset is lifted the firephone automatically rings the emergency evacuation panel. When the emergency evacuation panel calls the WIP, the call tone sounds through |
 |
A4566 |
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A simple in-line connection box fitted with a line monitoring capacitor. Since many 100V speakers do not have 22μF capacitors fitted, this box allows you to easily add it into the circuit for connection to a line monitoring system. |
 |
A4567C |
|
- This unit is designed for “loop in loop out” serial wiring to loudspeakers with a 47KΩ terminating resistor at the end of the line. Star wiring or tee offs are prohibited. Each loudspeaker requires a series connected 22µf bipolar capacitor for correct operation. A delay of 10 seconds is provided before registering a fault to minimise false alarms.
|
|
Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Many large commercial installations have speaker circuits in excess of 250W. |
 |
A2064 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The Redback A 2064 Remote Plate allows the Redback® A 4505B Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire and Cancel buttons, the plate can be located up to 100m away from the main unit. Connections up to 30m away can be made via standard Cat 5 cabling. |
 |
A2069 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The Redback® A 2069 Remote Plate allows the Redback® A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. Connections up to 30m away can be made via standard Cat 5 cabling. |
 |
A4599V |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
 |
A4599 |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
|
A1980B |
|
- Bright fire engine red casing.
- 35W max internal amplifier.
- In-built electronic siren to gain attention when required.
- Lightweight, easy to use with trigger to talk button.
- Be heard over distances up to 100m.
- Ideal for addressing large crowds at any event.
- Requires C size batteries (8 of).
|
|
A traditional hand held megaphone or bullhorn for announcing. Suitable for sports rallies, school carnivals, conventions, demonstrations etc. Includes inbuilt electronic siren for gaining instant attention. Light weight and easy to use. Up to 100m in ideal conditions. |
 |
A4579 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Designed for use with the A 4500B Timer and A 4505B Lockdown Timer |
 |
A4581V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4581V wall plate allows remote triggering of the Alert, Evacuation and Bell tones and the cancel function of the A4565A Alert/Evacuation Controller. |
 |
A4581 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A & A4500B alert/evac units to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
 |
A4578 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A alert/evac unit to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
