|
Description |
Downloads |
Specs |
Ordering |
|
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
M8199A
|
|
- 14Ah internal lithium-ion battery
- 100W modified sine wave 240V AC inverter
- 6A 4 x USB output (Type A, C & QC3.0)
- 3 x 2.1mm DC jack output (180W max)
- MPPT solar charger in-built
- Recharge by solar panel, mains or car charger
- In-built LED torch
- In-built reading LED light panel
- Colour LCD screen with capacity readout
- Ultra quiet operation
|
|
A complete mobile AC/DC power solution designed to be recharged via solar panels with in-built MPPT charging circuit. |
 |
M8636A |
|
- Operates 8-60V DC
- Ideal for 12V or 24V DC electrical systems
- Displays volts, amps, watts and average watts
- Backlit LCD Screen
- Anderson style connectors for easy connection
- Use with fridges, solar panels, dual battery systems and battery packs.
|
|
The perfect solution for measuring input and output currents and wattage from solar panels or batteries. |
 |
SL4576B
|
|
|
|
This 12.8V 100Ah lithium battery (LiFePO4) is compatible in size with traditional 90-100Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
N0706A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
Monitor your battery from your phone! Ensure your battery doesn’t go flat with this handy Bluetooth® battery monitor. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
S4532 |
|
- General
- Dimensions: 90L x 70W x 107H mm (including tabs)
- Weight: 1.45kg
- Capacity
- 20 Hour Rate (10.5V): 4.5Ah
- 10 hour Rate (10.5V): 4.2Ah
- 1 Hour Rate (9.60V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 45MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4540 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.2kg
- Capacity
- 20 Hour Rate (10.5V): 7.2Ah
- 10 Hour Rate (10.5V): 6.7Ah
- 1 Hour Rate (9.6V): 4.67Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: <25mΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.16A
- Maximum Discharging Current: 108A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 7.2Ah sealed lead acid (SLA) battery is perhaps the most common size SLA battery in use. |
 |
SL4541A
|
|
|
|
This 8Ah LiFEPO4 replacement battery is compatible in size with traditional 7Ah/9Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4557A
|
|
|
|
This 30Ah LiFEPO4 replacement battery is compatible in size with traditional 26Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
T5098
|
|
- Suits batteries up to 100Ah
- Dual 50A Anderson Plugs
- 12V Cigarette Socket
- 2 x 50A maxi blade fuses in circuit for extra protection.
- Lid with dual side clips for extra secure fit.
- Dual USB Ports with high current output (2 x 2.4A)
- Handy bar graph LED Voltmeter
- Circuit Breaker Switch
|
|
This 12V battery box features all the common connections that would typically be required for outdoor recreation power needs. |
 |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
SL4580W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 25kg. |
|
SL4576W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 20kg. |
 |
M8639 |
|
- Ideal for connection between vehicle and caravan or trailer.
- 1m length
- Anderson style plugs
- Suitable for solar panels
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
M8064 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8538 |
|
- Simple plug and charge operation
- Can be left permanently on charge
- Interchangeable charge leads
- Includes crocodile clip and ring terminal connections
- Two state LED charge indicator
- Ideal for charging back up auxiliary batteries and LiFePO4 battery powered vehicles, scooters etc.
|
|
This compact charger is suitable for charging Lithium Iron Phosphate batteries (LiFePO4 type) from mains power. |
 |
N2087 NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
S4550 |
|
- General
- Dimensions: 181L x 76W x 167H mm (including tabs)
- Weight: 5.4kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 18Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤16mΩ
- Max. Discharge Current: 180A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M5/F13
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 5.4A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 18Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N0160F |
|
- Maximum power: 160W
- Nominal voltage: 12V
- Short circuit current (ISC): 9.25A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 8.89A
- Maximum power voltage: 18V
- Connection: MC-4 Plug
- Dimensions: 664 x 1479 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 160W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
M8060 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
N0225F |
|
- Maximum power: 225W
- Nominal voltage: 24V
- Short circuit current (ISC): 6.44A
- Open circuit voltage: 43.20V
- Maximum power current (IMP): 6.25A
- Maximum power voltage: 36.0V
- Connection: MC-4 Plug
- Dimensions: 992 x 1316 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 225W 24V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This model is suitable for use in 24V battery systems or grid connected systems, large commercial solar installations etc. |
 |
S4491 |
|
- Capacity
- 20 Hour Rate (5.25V): 4.5Ah
- 10 Hour Rate (5.25V): 4.2Ah
- 1 Hour Rate (4.8V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 25MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
- General
- Dimensions: 70L x 47W x 107H mm (including tabs)
- Weight: 0.75kg
|
|
This 6V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
 |
M8070A |
|
- Output power: 150W
- Surge power: 450W
- Output voltage: 230V AC @ 50Hz
- Output wave form: Modified sine wave
- DC input voltage: 12V DC nominal
- Efficiency (typical): 90%
- No-load current draw: <0.5A
- Low battery shutdown: 10 ± 0.5V
- High battery shutdown: 15.5 ± 0.5V
- Alarm & thermal shutdown: 60 ± 0.5°C
- Short circuit protection: Yes
- Dimensions (mm): 135L x 60W x 60H
- Net weight: 0.4kg
|
|
Designed in the shape of a soft drink can, this compact inverter mounts snugly in your vehicle's cup/drink holder. |
 |
N0200F
|
|
- Maximum power: 200W
- Nominal Voltage: 12V
- Short circuit current (ISC): 10.34A
- Open circuit voltage: 24.8V
- Maximum power current (IMP): 9.62A
- Maximum power voltage: 20.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1630 x 35 mm
- Operating Temperature: -40°C to +85°C
|
|
This quality 200W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
N0110F |
|
- Maximum power: 110W
- Nominal voltage: 12V
- Short circuit current (ISC): 6.6A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 6.16A
- Maximum power voltage: 17.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1006 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 110W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
N1130F |
|
- High quality 130W mono-crystalline solar panel
- Portable camping power ensuring your batteries don't run flat
- Great for campers and caravan owners running a fridge or lighting from their vehicle batteries.
- 12V/10A regulator with USB output
- 5m cable with alligator clips
- Carry bag included
- 5 year workmanship warranty
- 25 year output warranty
|
|
Portable folding solar panel system (130W mono-crystalline type) for camping and caravans. This kit provides quick site power for your batteries ensuring your camping fridge is always on the go without the danger of your batteries running flat. It features a high performance weatherproof solar regulator with 3-stage battery charging circuit. |
 |
N0704A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
S4528 |
|
- General
- Dimensions: 79L x 56W x 107H mm (including tabs)
- Weight: 1.1kg
- Charging
- 20 Hour Rate (10.5V): 2.9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 34MΩ
- Max Discharge Current: 43.5A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 0.87A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 2.9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
Q0592 |
|
|
|
This meter is used to monitor all kinds of battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy, running time and display the measurement data through the LCD screen. |
 |
M8062 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8642 |
|
- Length: 300mm
- Cable type: 2 x 8AWG cable
- Input Connection: Ring Terminal (M8)
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- DC current rating: 50A
- Current Draw: 50A
|
|
This series of high current connectors are ideal for automotive, 4WD and caravan uses. The connectors are also suitable for industrial interconnection. |
 |
N0004F |
|
- Maximum power: 4W
- Nominal voltage: 6V
- Short circuit current (ISC): 0.71A
- Open circuit voltage: 7.2V
- Maximum power current (IMP): 0.67A
- Maximum power voltage: 6V
- Connection: 0.5m bare end fly lead
- Dimensions: 239 x 189 x 18 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 4W 6V Polycrystalline solar panel module is designed for direct connection to a charge controller for battery charging (typically lithium cells). The compact size makes it perfect for battery maintenance in low power equipment. |
 |
N0040F |
|
- Maximum power: 40W
- Nominal voltage: 12V
- Short circuit current (ISC): 2.50A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 2.33A
- Maximum power voltage: 17.2V
- Connection: MC-4 Plug (1m lead)
- Dimensions: 664 x 408 x 25 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 40W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
M8649 |
|
- Cable length: 0.3m
- Cable type: 2 x 8AWG
- Dimensions details: Counduit
- Length: 220mm
- Diameter: 15mm
- Device: Plug and Socket Set
- DC current rating: 30A
|
|
This lead is ideal for automotive, 4WD and caravan uses. One end is an Anderson connector (50A) and on the other end is a PV connector. |
 |
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
N2003 |
|
- Suits 12V systems only
- Adjustable run time for connected load or “always on” configuration
- Overcharge, discharge, over current, short circuit (with recommended 3A fuse) and reverse polarity protection.
- Three stage PWM charge control
|
|
An ultra compact PWM solar charge controller for compact solar power systems using panels 40 Watts or less. |
 |
S4517 |
|
- General
- Dimensions: 97L x 43W x 58H mm (including tabs)
- Weight: 0.55kg
- Capacity
- 20 Hour Rate (5.25V): 1.3Ah
- 10 Hour Rate (5.25V): 1.1Ah
- 1 Hour Rate (4.8V): 0.78Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 95MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 0.36A
- Maximum Discharging Current: 18A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8065 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
N0020F |
|
- Maximum power: 20W
- Nominal voltage: 12V
- Short circuit current (ISC): 1.25A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 1.16A
- Maximum power voltage: 17.2V
- Connection: 0.5m bare end fly lead
- Dimensions: 410 x 351 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 20W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
S4552 |
|
- General
- Dimensions: 181L x 77W x 167H mm (including tabs)
- Weight: 5.9kg
- Capacity
- 20 Hour Rate (10.5V): 20Ah
- 10 Hour Rate (10.5V): 18.7Ah
- 1 Hour Rate (9.6V): 13Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- Charging
- Internal Resistance: Approximately 14MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 6A
- Maximum Discharging Current: 300A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 20Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
 |
M8656 |
|
- Length: 300mm
- Cable type: 2 x 8AWG
- Input Connection: Ring Terminal (M8)
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Fuse: In-line 50A Maxi blade fuse
- Output Quantity: 2pc
- AC current rating: 50A
- DC current rating: 50A
- Current Draw: 50A
|
|
This Anderson style ring terminal adaptor cable allows you to permanently connect an Anderson style connection cable to your vehicles battery. |
 |
N0700A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
N2016 |
|
- Utilises Maximum Power Point Tracking (MPPT) circuitry
- Suitable for lead acid batteries
- Over temperature & short circuit protection
- Under input voltage shutdown
- Battery under voltage shutdown
- Fully sealed IP67 rated design
- Suits 12V battery systems
|
|
This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. |
 |
P7760 |
|
|
|
Anderson style grey 50A DC power connector. |
 |
M8640 |
|
- Length: 300mm
- AC current rating: 50A
- DC current rating: 50A
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Output Quantity: 1pc
|
|
This double Anderson style piggyback adaptor cable allows you to split a single Anderson connector output into two. Ideal for connecting between battery and solar panels or between battery and DC appliances. Pre-made with tinned copper cable and machine crimped terminations. |
 |
M8072 |
|
- Converts 12V DC to 240V AC mains power
- All metal construction for use in rugged environments
- Soft starting
- Modified sine wave
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
- Car accessory plug connection
|
|
This compact rugged inverter is ideal for portable TVs, laptops, printers, battery chargers, portable Hi-Fi's, power drills, power tools, small pumps, lighting, etc. Supplied complete with integral mounting base plate for securing to a vehicle or caravan. |
 |
P7810 |
|
|
|
Provides easy connection to solar panels and auxiliary batteries/appliances utilising 50A Anderson connection. |
 |
M8643 |
|
- Length: 300mm
- Cable type: 16AWG twin core
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Cigarette lighter/Merit plug
- Output Quantity: 1pc
- Current Draw: 15A max.
|
|
This merit/car accessory plug to Anderson style adaptor allows connection between solar panels and DC powered appliances and your vehicles car accessory socket (cigarette lighter socket). |
 |
SL4584A
|
|
|
|
This 12V 200Ah LiFePO4 replacement battery is compatible in size with traditional 200Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
 |
M8067 |
|
- Galvanic isolation between AC and DC for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
N2015 |
|
- Utilises Maximum Power Point Tracking (MPPT) circuitry
- Multi chemistry for lead acid batteries
- Over temperature & short circuit protection
- Under input voltage shutdown
- Battery under voltage shutdown
- Fully sealed IP67 rated design
- Suits 12V battery systems.
|
|
This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. |
 |
M8644 |
|
- Length: 300mm
- Cable type: 16AWG twin core
- Input Type: Anderson 50A 2 Pole
- Output Type: Cigarette Lighter 15A
|
|
This car accessory (cigarette lighter) socket to Anderson plug adaptor cable allows connection of DC appliances fitted with car accessory plugs to be powered from an Anderson extension cable. Ideal for powering portable appliances from auxiliary batteries. |
 |
P7811 |
|
|
|
This connector features a 12V car accessory ideal for charging compatible devices. |
 |
Q0586 |
|
- Electrical parameter measurement (voltage, current, load resistance, dump energy (symbol display))
- Backlight (you can control the backlight on/off through the button)
- LCD display (display voltage, current, resistance, energy at the same time)
|
|
This compact flush mount panel display provides an easy way to monitor battery voltage, approximate level, load current and resistance. |
 |
M8655 |
|
|
|
A 2m Anderson style cable fitted with USB type C Power Delivery Charger (18W) & USB QC 3.0 port for keeping devices charged in remote battery systems. |
 |
S4547 |
|
- General
- Dimensions: 151L x 98W x 101H mm (including tabs)
- Weight: 3.6kg
- Capacity
- 20 Hour Rate (10.5V): 12Ah
- 10 Hour Rate (10.5V): 11.2Ah
- 1 Hour Rate (9.6V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0515A
|
|
- Perfect for travel and in the home
- MagSafe Charging Function for iPhone 12 or later
- Qi Wireless Charging Function for Qi compatible devices
- USB Charge lead for powerbank included
- Easy to charge phone if out of reach from mains
- Doesn't need a USB lead to charge if your phone has wireless charge capabilities
|
|
This wireless charging battery bank allows you to charge your phone wirelessly and more conveniently as you simply place your Qi - enabled smartphone on the powerbank. |
|
M8646 |
|
- Anderson style plugs
- Suitable for solar panels
- Provides 3m extension to assist you chase the sun or include an additional solar panel in your system
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
N0080F |
|
- Maximum power: 80W
- Nominal voltage: 12V
- Short circuit current (ISC): 4.9A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 4.55A
- Maximum power voltage: 17.6V
- Connection: 1m Dual MC-4 Plug Lead
- Dimensions: 760 x 664 x 25 mm
- Operating temperature: -40° to +85°C
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
SL4566A
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SG4560 |
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 33Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
P2180 |
|
- Allows for terminating of heavy-duty cables for one or more connections
- Red colour allows for easy and clear colour coding for wiring
- Glass Fibre reinforced Nylon base ensures great mechanical strength and durability
- Heavy duty terminal studs (up to M10)
|
|
This Dual Red M8 Power Distribution Post with Bridge Plate is a heavy duty stainless steel post that is mounted on a moulded plastic base. 48V DC max. |
 |
P2172 |
|
- Allows for terminating of heavy-duty cables for one or more connections
- Red colour allows for easy and clear colour coding for wiring
- Glass Fibre reinforced Nylon base ensures great mechanical strength and durability
- Heavy duty terminal studs
|
|
This Single Red M8 Power Distribution Post is a heavy duty stainless steel post that is mounted on a moulded plastic base. 48V DC max. |
 |
M8650A |
|
|
|
This Anderson style plug adaptor cable suits a Waeco fridge. |
 |
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
|
M8647 |
|
- Anderson style plugs
- Suitable for solar panels
- Provides 5m extension to assist you chase the sun or include an additional solar panel in your system
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
S4482 |
|
- Cell Per Unit: 3
- Nominal Voltage (V): 6
- Nominal Capacity (Ah): 1.3Ah @ 20hour rate F.V (1.75/Cell)
- Weight: Approx. 0.33kg
- Internal Resistance (1KHz): 38mΩ
- Max Discharge Current (5s): 19.5A (5s)
- Battery Life: Stand by 3~5 years
- Terminal Type: F1
- Container Material: ABS
- Charge 0°C to 40°C
- Discharge -15°C to 50°C
- Storage -15°C to 40°C
- Max Charge Current: 0.39A
- Charge Voltage: 7.2V to 7.5V
- Stand By: Charge Voltage: 6.75 to 6.90V
- Physical Size (mm): 97L x 25W x 57H mm (including tabs)
- Weight: 0.32kg
|
|
This 6V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
Q0591 |
|
- Electrical parameter measurement function (voltage, current, active power, energy)
- Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm).
- The reset function of energy key.
- Store data when power off.
- Large-screen LCD (display voltage, current, active power, energy at the same time)
- Backlight function.
|
|
A complete power monitoring panel with voltage, current, power and energy consumption (Wh) displayed simultaneously. |
 |
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
 |
N0010F |
|
- Maximum power: 10W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.65A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.56A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 364 x 230 x 18 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 10W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
M8641 |
|
- Length: 300mm
- Cable: 2 x 8AWG
- Item Connection: Anderson Plug
- Vehicle Connection: Alligator Clamps
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Alligator Clips
- Output Quantity: 1pc
|
|
This series of high current connectors are ideal for automotive, 4WD and caravan uses. The connectors are also suitable for industrial interconnection. |
 |
S4554 |
|
- General
- Dimensions: 165L x 175W x 125H mm (including tabs)
- Weight: 8.3kg
- Terminal: M5 bolt (F12)
- Capacity
- 20 Hour Rate (10.5V): 26Ah
- 10 Hour Rate (10.5V): 24.1Ah
- 1 Hour Rate (9.6V): 16.4Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 15MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 7.8A
- Maximum Discharging Current: 390A (5 sec.)
- Designed Floating Life: 5 years.
|
|
his 12V 26Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N0005F |
|
- Maximum power: 5W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.31A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.28A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 230 x 205 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 5W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
P7812 |
|
|
|
Provides easy connection to solar panels and auxiliary batteries/appliances utilising 50A Anderson connection. |
 |
M8645 |
|
- Length: 300mm
- Cable type: 16AWG twin core
- Input Type: Anderson 50A 2 Pole
- Output Type: Cigarette Lighter 2x15A
|
|
This dual car accessory (cigarette lighter) socket to Anderson plug adaptor cable allows connection of DC appliances fitted with car accessory plugs to be powered from an Anderson extension cable. |
 |
P2181 |
|
- Allows for terminating of heavy-duty cables for one or more connections
- Black colour allows for easy and clear colour coding for wiring
- Glass Fibre reinforced Nylon base ensures great mechanical strength and durability
- Heavy duty terminal studs (up to M10)
|
|
This Dual Black M8 Power Distribution Post with Bridge Plate is a heavy duty stainless steel post that is mounted on a moulded plastic base. 48V DC max. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4563 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 12.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 10mΩ
- Max. Discharge Current (5s): 380A
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand by:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SL4581B
|
|
|
|
The latest generation in maintenance free batteries is here! LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus, weigh less than HALF as much as SLA batteries. |
 |
S4561 |
|
- General
- Dimensions: 195L x 130W x 155H mm (including tabs)
- Weight: 10.7kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 35Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 525A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 10.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 35Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4501 |
|
- General
- Dimensions: 151L x 50W x 100H mm (including tabs)
- Weight: 1.75kg
- Capacity
- 20 Hour Rate (5.25V): 12Ah
- 10 Hour Rate (5.25V): 11Ah
- 1 Hour Rate (4.8V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 12MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 6V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
Q0587 |
|
|
|
An adjustable battery capacity readout allowing you to display approximate battery levels for any battery between 1V and 100V. |
 |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
P7772 |
|
|
|
Extra crimp lug to suit Anderson style 50A DC power connectors, Altronics part numbers P7760-4. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
P2173 |
|
- Allows for terminating of heavy-duty cables for one or more connections
- Black colour allows for easy and clear colour coding for wiring
- Glass Fibre reinforced Nylon base ensures great mechanical strength and durability
- Heavy duty terminal studs
|
|
This Single Black M8 Power Distribution Post is a heavy duty stainless steel post that is mounted on a moulded plastic base. 48V DC max. |
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
Powerhouse