|
Description |
Downloads |
Specs |
Ordering |
|
 |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
 |
SL4599BT NEW
|
|
|
|
This 25.6V 200Ah lithium battery (LiFePO4 chemistry) is compatible in size with traditional 24V SLA batteries, but with all the benefits of cutting edge lithium technology. With Bluetooth monitoring in-built. |
 |
SL4587BT NEW
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries with Bluetooth. |
 |
SL4580W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 25kg. |
 |
SL4584BT NEW
|
|
- Our Powerhouse battery monitoring app is currently in development, however in the mean time customers can utilise the XiaoXiangElectric battery monitor app available on the GooglePlay and Apple App stores at the links below:
- iOS App Store
- Android Devices
|
|
This 12V 200Ah LiFePO4 replacement battery is compatible in size with traditional 200Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries with Bluetooth. |
 |
SL4596BT NEW
|
|
|
|
This 25.6V 100Ah lithium battery (LiFePO4 chemistry) is compatible in size with traditional 24V SLA batteries, but with all the benefits of cutting edge lithium technology. With Bluetooth monitoring in-built. |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4581B
|
|
|
|
The latest generation in maintenance free batteries is here! LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus, weigh less than HALF as much as SLA batteries. |
 |
M8067 |
|
- Galvanic isolation between AC and DC for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
SL4576W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 20kg. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
SL4578BT NEW
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology with Bluetooth. |
 |
M8133 |
|
- 3000W surge rating
- 1500W continuous
- Pure AC output
- 3 stage MPPT solar regulator in-built
- Sturdy construction for use in rugged environments
- Soft starting
- High efficiency
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
|
|
A versatile and high spec inverter with MPPT solar charger in built. |
 |
SL4576B
|
|
|
|
This 12.8V 100Ah lithium battery (LiFePO4) is compatible in size with traditional 90-100Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
SL4576BT NEW
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-120Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. With Bluetooth monitoring in-built. |
 |
M8066 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
N1117A NEW
|
|
- Top grade monocrystalline panels
- Durable encapsulated panels with anti-reflective design
- Tough canvas outer with double stitched panels
- Four pop out stands on rear for freestanding use
- Metal hanging hooks on each panel
- Weather resistant design
- 5m Anderson connection cable
|
|
Provide portable charging power for your campsite set up. Double stitched panels, durable webbing straps and metal hanging loops and zippered cable pocket. Folds up and secures with velcro for a fast getaway! 5m Anderson cable connection. |
 |
M8065 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8027 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
S4579 |
|
- General
- Dimensions: 410L x 176W x 227H mm (including tabs)
- Weight: 36kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 125Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current: 1300A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 40A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 126Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SL4566B |
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4566BT NEW
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology with bluetooth. |
 |
SG4577 |
|
- Physical Size
- Length: 330mm
- Width: 171mm
- Height (Total inc. tabs): 215mm
- Weight: 31kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 110Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤5mΩ
- Max. Discharge Current (5s): 1000A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8) /NB (F16)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 33A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 110Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
M8064 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
N0225F
|
|
- Maximum power: 225W
- Nominal voltage: 24V
- Short circuit current (ISC): 6.44A
- Open circuit voltage: 43.20V
- Maximum power current (IMP): 6.25A
- Maximum power voltage: 36.0V
- Connection: MC-4 Plug
- Dimensions: 992 x 1316 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 225W 24V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This model is suitable for use in 24V battery systems or grid connected systems, large commercial solar installations etc. |
 |
S4576 |
|
- General
- Dimensions: 330L x 173W x 220H mm (including tabs)
- Weight: 30.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 100Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): <5.5mΩ
- Max. Discharge Current: 950A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 100Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N1114A NEW
|
|
- Top grade monocrystalline panels
- Durable encapsulated panels with anti-reflective design
- Tough canvas outer with double stitched panels
- Metal hanging hooks on each panel
- Weather resistant design
- 5m Anderson connection cable
|
|
Provide portable charging power for your campsite set up. Double stitched panels, durable webbing straps and metal hanging loops and zippered cable pocket. Folds up and secures with velcro for a fast getaway! 5m Anderson cable connection.
|
 |
S4574 |
|
- General
- Dimensions: 303L x 169W x 215H mm (including tabs)
- Weight: 27kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 90Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6mΩ
- Max. Discharge Current: 1080A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 90Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SG4571 |
|
- Physical Size
- Length: 258mm
- Width: 166mm
- Height (Total inc. tabs): 215mm
- Weight: 24.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current (5s): 900A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 24A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
N2089A NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with MPPT solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
N0200F
|
|
- Maximum power: 200W
- Nominal Voltage: 12V
- Short circuit current (ISC): 10.34A
- Open circuit voltage: 24.8V
- Maximum power current (IMP): 9.62A
- Maximum power voltage: 20.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1630 x 35 mm
- Operating Temperature: -40°C to +85°C
|
|
This quality 200W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
M8195C NEW
|
|
- Compact design with 24000mAh (88.8Wh) internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- 90W USB type C PD input and output
- Can be used as a USB power bank to keep devices charged on the go.
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8025 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8057 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 1500W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
S4571 |
|
- General
- Dimensions: 259L x 168W x 215L mm (including tabs)
- Weight: 24kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6.6mΩ
- Max. Discharge Current: 900A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 22.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N0160F |
|
- Maximum power: 160W
- Nominal voltage: 12V
- Short circuit current (ISC): 9.25A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 8.89A
- Maximum power voltage: 18V
- Connection: MC-4 Plug
- Dimensions: 664 x 1479 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 160W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
SL4557BT NEW
|
|
|
|
This 30Ah LiFEPO4 replacement battery is compatible in size with traditional 26Ah SLA batteries, but with all the benefits of cutting edge lithium technology and bluetooth. |
 |
M8062 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
N1130F |
|
- High quality 130W mono-crystalline solar panel
- Portable camping power ensuring your batteries don't run flat
- Great for campers and caravan owners running a fridge or lighting from their vehicle batteries.
- 12V/10A regulator with USB output
- 5m cable with alligator clips
- Carry bag included
- 5 year workmanship warranty
- 25 year output warranty
|
|
Portable folding solar panel system (130W mono-crystalline type) for camping and caravans. This kit provides quick site power for your batteries ensuring your camping fridge is always on the go without the danger of your batteries running flat. It features a high performance weatherproof solar regulator with 3-stage battery charging circuit. |
 |
T5096 NEW
|
|
- A complete pre-wired DC connection solution for your auxiliary battery.
- Ideal for caravans, 4WDs and motorhomes.
- Backlit display readout with input volts DC, temperature, watts (input) and connection statuses.
- Power up to 13 different devices/appliances at once!
- USB charging: 2 x 2.4A USB-A outputs, 2 x QC3.0 USB-A outputs, 1 x USB-C PD 20W output, 1 x USB-C PD 100W output.
- Four 50A Anderson style connections (1 input, 3 output).
- Appliance power: 2 x car accessory sockets, 2x DC coaxial barrel outputs (5.5 x 2.1mm).
- Top mount LED torch light.
- Includes brackets for surface mounting.
|
|
A complete pre-wired DC connection solution for your auxiliary battery. Ideal for caravans, 4WDs and motorhomes. Backlit display readout with input volts DC, temperature, watts (input) and connection statuses. |
 |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
S4567 |
|
- General
- Dimensions: 229L x 138W x 213H mm (including tabs)
- Weight: 16.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate. FV (1.75/Cell)
- Internal Resistance (1KHz): 7.5mΩ
- Max. Discharge Current: 660A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N2087 NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
 |
M8056 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 1000W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
N0110F |
|
- Maximum power: 110W
- Nominal voltage: 12V
- Short circuit current (ISC): 6.6A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 6.16A
- Maximum power voltage: 17.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1006 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 110W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
 |
S4563 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 12.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 10mΩ
- Max. Discharge Current (5s): 380A
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand by:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SG4563 |
|
- Physical Size
- Length: 197mm
- Width: 165mm
- Height (Total inc. tabs): 170mm
- Weight: 14.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current (5s): 480A (5s)
- Battery Life: 6-9 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
SL4551BT NEW
|
|
|
|
This 20Ah LiFEPO4 replacement battery is compatible in size with traditional 20Ah SLA batteries, but with all the benefits of cutting edge lithium technology with Bluetooth. |
 |
M8194A NEW
|
|
- Compact design with 20000mAh (74Wh) internal battery pack
- 2 hour recharge
- Includes all neccessary adaptors, housed in a compact carry case with jumpstarter so users have everything they need on the go
- 1x USB Type-A USB Output
- 1x USB Type-C USB Input/Output
- 1W LED torch
- Includes two DC outputs with cigarette lighter socket lead (1x lead included) for powering car fridge, lighting, and other car accessories.
- Starts typical 4, 6 & 8 cylinder engines (inc diesels).
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles. The 20000mAh rating provides up to 1000A peak output when cranking. 60W USB C power delivery charging in built. |
 |
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
 |
SG4560A |
|
- Physical Size
- Length: 197mm
- Width: 130mm
- Height (Total inc. tabs): 163mm
- Weight: 10.3kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
|
|
This 12V 33Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
 |
S4561 |
|
- General
- Dimensions: 195L x 130W x 155H mm (including tabs)
- Weight: 10.7kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 35Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 525A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 10.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 35Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8060 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
M8024 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
A compact 24V 300W inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
SG4560 |
|
- Physical Size
- Length: 195mm
- Width: 130mm
- Height (Total inc. tabs): 155mm
- Weight: 10.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 5-7 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9.9A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 33Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
SG4554A |
|
- Physical Size
- Length: 166mm
- Width: 175mm
- Height (Total inc. tabs): 125mm
- Weight: 8.8kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 28Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 390A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: M5 (F12)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
Deep cycle batteries are designed for regular discharge. These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
N0065G |
|
- Maximum power: 65W
- Nominal voltage: 12V
- Short circuit current (ISC): 3.9A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 3.72A
- Maximum power voltage: 17.5V
- Connection: MC-4 Plug
- Dimensions: 664 x 664 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This 65 Watt model is an excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RVs, caravans, boats etc. |
 |
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
T5098
|
|
- Suits batteries up to 100Ah
- Dual 50A Anderson Plugs
- 12V Cigarette Socket
- 2 x 50A maxi blade fuses in circuit for extra protection.
- Lid with dual side clips for extra secure fit.
- Dual USB Ports with high current output (2 x 2.4A)
- Handy bar graph LED Voltmeter
- Circuit Breaker Switch
|
|
This 12V battery box features all the common connections that would typically be required for outdoor recreation power needs. |
 |
S4554 |
|
- General
- Dimensions: 165L x 175W x 125H mm (including tabs)
- Weight: 8.3kg
- Terminal: M5 bolt (F12)
- Capacity
- 20 Hour Rate (10.5V): 26Ah
- 10 Hour Rate (10.5V): 24.1Ah
- 1 Hour Rate (9.6V): 16.4Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 15MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 7.8A
- Maximum Discharging Current: 390A (5 sec.)
- Designed Floating Life: 5 years.
|
|
his 12V 26Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8561A NEW
|
|
- 88% efficient switchmode power supply design.
- Protections: overload / over voltage / short circuit / under voltage / reverse polarity.
- 5A max connected load. 650mA battery charging circuit.
- LEDs provide quick status indication.
- Fits a standard size 7.2Ah 12V SLA battery.
- Patented design with simple wall mount installation.
- 100% full load burn-in tested.
- 2 year warranty.
|
|
A complete 12V DC power supply and UPS battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). |
|
SG4554 |
|
- Physical Size
- Length: 166mm
- Width: 175mm
- Height (Total inc. tabs): 125mm
- Weight: 8.8kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 28Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 390A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: M5 (F12)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 26Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
N0050F NEW
|
|
- Maximum power: 50W
- Nominal voltage: 12V
- Short circuit current (ISC): 2.97A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 2.78A
- Maximum power voltage: 18V
- Connection: MC-4 Plug
- Dimensions: 524 x 664 x 25 mm
- Operating temperature: -40°C to 85°C
|
|
This 50W monocrystalline silicon solar panel is designed for long life (up to 25 years) and high efficiency output. They may be wired in series or parallel arrays. |
 |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
 |
M8054 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 600W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
N0040F |
|
- Maximum power: 40W
- Nominal voltage: 12V
- Short circuit current (ISC): 2.50A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 2.33A
- Maximum power voltage: 17.2V
- Connection: MC-4 Plug (1m lead)
- Dimensions: 664 x 408 x 25 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 40W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
M8538 |
|
- Simple plug and charge operation
- Can be left permanently on charge
- Interchangeable charge leads
- Includes crocodile clip and ring terminal connections
- Two state LED charge indicator
- Ideal for charging back up auxiliary batteries and LiFePO4 battery powered vehicles, scooters etc.
|
|
This compact charger is suitable for charging Lithium Iron Phosphate batteries (LiFePO4 type) from mains power. |
 |
S4552 |
|
- General
- Dimensions: 181L x 77W x 167H mm (including tabs)
- Weight: 5.9kg
- Capacity
- 20 Hour Rate (10.5V): 20Ah
- 10 Hour Rate (10.5V): 18.7Ah
- 1 Hour Rate (9.6V): 13Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- Charging
- Internal Resistance: Approximately 14MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 6A
- Maximum Discharging Current: 300A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 20Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SL4541A
|
|
|
|
This 8Ah LiFEPO4 replacement battery is compatible in size with traditional 7Ah/9Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
M8647 |
|
- Anderson style plugs
- Suitable for solar panels
- Provides 5m extension to assist you chase the sun or include an additional solar panel in your system
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
N0706A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
N2016 |
|
- Utilises Maximum Power Point Tracking (MPPT) circuitry
- Suitable for lead acid batteries
- Over temperature & short circuit protection
- Under input voltage shutdown
- Battery under voltage shutdown
- Fully sealed IP67 rated design
- Suits 12V battery systems
|
|
This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. |
 |
S4550 |
|
- General
- Dimensions: 181L x 76W x 167H mm (including tabs)
- Weight: 5.4kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 18Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤16mΩ
- Max. Discharge Current: 180A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M5/F13
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 5.4A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 18Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8051 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 300W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
M8070A |
|
- Output power: 150W
- Surge power: 450W
- Output voltage: 230V AC @ 50Hz
- Output wave form: Modified sine wave
- DC input voltage: 12V DC nominal
- Efficiency (typical): 90%
- No-load current draw: <0.5A
- Low battery shutdown: 10 ± 0.5V
- High battery shutdown: 15.5 ± 0.5V
- Alarm & thermal shutdown: 60 ± 0.5°C
- Short circuit protection: Yes
- Dimensions (mm): 135L x 60W x 60H
- Net weight: 0.4kg
|
|
Designed in the shape of a soft drink can, this compact inverter mounts snugly in your vehicle's cup/drink holder. |
 |
D0515A
|
|
- Perfect for travel and in the home
- MagSafe Charging Function for iPhone 12 or later
- Qi Wireless Charging Function for Qi compatible devices
- USB Charge lead for powerbank included
- Easy to charge phone if out of reach from mains
- Doesn't need a USB lead to charge if your phone has wireless charge capabilities
|
|
This wireless charging battery bank allows you to charge your phone wirelessly and more conveniently as you simply place your Qi - enabled smartphone on the powerbank. |
 |
N2015 |
|
- Utilises Maximum Power Point Tracking (MPPT) circuitry
- Multi chemistry for lead acid batteries
- Over temperature & short circuit protection
- Under input voltage shutdown
- Battery under voltage shutdown
- Fully sealed IP67 rated design
- Suits 12V battery systems.
|
|
This compact IP67 weatherproof module provides MPPT solar charging for lead acid batteries. Maximum Power Point Tracking (MPPT) circuitry to provide up to 20% additional charge energy than conventional regulators. |
|
M8646 |
|
- Anderson style plugs
- Suitable for solar panels
- Provides 3m extension to assist you chase the sun or include an additional solar panel in your system
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
M8072 |
|
- Converts 12V DC to 240V AC mains power
- All metal construction for use in rugged environments
- Soft starting
- Modified sine wave
- Reverse polarity protection
- Output overload protection
- Over temperature protection
- High and low battery voltage shutdown
- Output short circuit protection
- Standard AC mains outlet for 240V connection
- Car accessory plug connection
|
|
This compact rugged inverter is ideal for portable TVs, laptops, printers, battery chargers, portable Hi-Fi's, power drills, power tools, small pumps, lighting, etc. Supplied complete with integral mounting base plate for securing to a vehicle or caravan. |
 |
N0704A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
N0020F |
|
- Maximum power: 20W
- Nominal voltage: 12V
- Short circuit current (ISC): 1.25A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 1.16A
- Maximum power voltage: 17.2V
- Connection: 0.5m bare end fly lead
- Dimensions: 410 x 351 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 20W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
Monitor your battery from your phone! Ensure your battery doesn’t go flat with this handy Bluetooth® battery monitor. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. |
 |
M8648 |
|
|
|
Turns an Anderson output into a USB charger and car accessory socket for powering devices. Max 2.1A current per USB port. |
 |
M8050 |
|
- Isolated design for maximum electrical safety
- Modified sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan
|
|
This compact 150W modified sine wave power inverter is ideal for providing AC power to appliances whilst away from mains power. |
 |
D0511C NEW
|
|
- Dual USB QC3.0 type A charging outputs
- USB C Power Delivery (18W) output / charging input.
- LED capacity indicators
- Universal design for charging all USB devices.
- Stylish design
|
|
Offering both QuickCharge 3.0 charging and 18 Watt USB-C PD output, this 20,000mAh power bank will keep your devices charged up on the go. |
 |
M8521B NEW
|
|
- Multi stage adaptive charging for most types of lead acid and LiFePO4 (lithium) batteries.
- Microcontroller smart charging.
- Suitable for permanent connection (maintenance charging).
- Reverse polarity protection.
- Spark proof connection.
- Quick connect harness.
- Suits 6V and 12V lead acid batteries.
- Suits 12V LiFePO4 (lithium) batteries.
|
|
This 6V/12V battery charger maintainer provides 1.5A charging current suitable for lithium, lead-gel and lead acid batteries, including maintenance free battery types. |
 |
S4547 |
|
- General
- Dimensions: 151L x 98W x 101H mm (including tabs)
- Weight: 3.6kg
- Capacity
- 20 Hour Rate (10.5V): 12Ah
- 10 Hour Rate (10.5V): 11.2Ah
- 1 Hour Rate (9.6V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
Powerhouse