|
Description |
Downloads |
Specs |
Ordering |
|
 |
N2089A NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with MPPT solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
M8195C NEW
|
|
- Compact design with 24000mAh internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
N2087 NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
M8194A NEW
|
|
- Compact design with 20000mAh internal battery pack
- 2 hour recharge
- Includes all neccessary adaptors, housed in a compact carry case with jumpstarter so users have everything they need on the go
- 1x USB Type-A USB Output
- 1x USB Type-C USB Input/Output
- 1W LED torch
- Includes two DC outputs with cigarette lighter socket lead (1x lead included) for powering car fridge, lighting, and other car accessories.
- Starts typical 4, 6 & 8 cylinder engines (inc diesels).
|
COMING SOONThis item is arriving soon. |
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles. The 20000mAh rating provides up to 1000A peak output when cranking. 60W USB C power delivery charging in built. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
M8585 |
|
- Compact design
- Short circuit protection
- Current limiting
- Fused output
- Selectable output (6V,12V or 24V)
- Simple installation
- LED power indicator
|
|
These modules are a complete regulated power supply and battery charger in one compact package. With the appropriate transformer they can be configured to deliver either 6V, 12V or 24V DC. Voltage selection is via an on board DIP switch. Both models incor |
 |
M8528 |
|
- Suitable for recharging of lead acid batteries or permanent maintenance charging.
- 3 stage charging.
- Reverse polarity protected
- Short circuit protected
- Easy plug in design fits a standard GPO.
- LED charge status indicators
- Automatic trickle charging.
- Suits 6V or 12V batteries
- 2600mAH charge current.
- Suits batteries from 6-12Ah (6V), 11-60Ah (12V)*
|
|
All models automatically switch from boost charge to trickle charge once full capacity is reached. |
 |
M8538 |
|
- Simple plug and charge operation
- Can be left permanently on charge
- Interchangeable charge leads
- Includes crocodile clip and ring terminal connections
- Two state LED charge indicator
- Ideal for charging back up auxiliary batteries and LiFePO4 battery powered vehicles, scooters etc.
|
|
This compact charger is suitable for charging Lithium Iron Phosphate batteries (LiFePO4 type) from mains power. |
 |
N2130 |
|
|
|
Extend Battery Life up to 3x Times! The all new ANBI Battery Conditioner transmits a high frequency digital pulse within the battery. These digital pulse frequencies break down the sulphates in the battery, extending battery life and increasing battery reliability. |
 |
M8544 |
|
|
|
These compact desulphation units connect between the positive and negative terminals of your battery and provide high frequency pulses to break down sulfation on battery plates and provide additional service life. |
 |
A0712 |
|
- Operating voltage: 12V battery
- Maximum switching current: 20A with cooling, 10A no cooling
- Switching voltage: 10.4V - 13.3V
- Reset voltage: 0.8V±0.3V above switching voltage
- Cutoff device: powerMOS transistor in the negative line
- Device current consumption: <0.7mA in OFF condition, <1.6mA in ON condition (LED lights)
- Dimensions: 87W x 60D x 33Hmm including mounting flanges
|
|
This battery saver protects your 12V car battery from discharge by disconnecting loads to prevent voltage dropping below a preset limit (10.4 to 13.3V). The module automatically reconnects the loads once the battery recharges, typically 0.8V above cut-off |
 |
N2099A |
|
- Receive notification alerts when Bluetooth in range
- Check vehicle cranking system automatically while engine starting
- Check charging system (alternator)
- List driving periods
- Alert smartphone if abnormalities occur.
- Short-circuit and reverse connection protection
- Data stored in battery monitor for up to 31 days
- Automatic synchronisation when in Bluetooth range
- Compatible with all 12V vehicle batteries
- Graphical historical data display
- Engine starting detection automatically
- Free BM2 app for both iOS and Android devices
|
|
Monitor your battery from your phone! Ensure your battery doesn’t go flat with this handy Bluetooth® battery monitor. Provides live feedback on your vehicle or auxiliary battery, plus long term stats. |
 |
A0292 NEW
|
|
- Suits Ni-MH, N-Cd, Li-ion & LiFePO4
- Intelligent fast charging up to 2A
- Independent charging slots
- LCD screen
|
|
This intelligent charger has four independent charging slots to charge any combination of Ni-MH, Ni-Cd, Li-ion, or LiFePO4 cells at the same time. |
 |
M8572 |
|
- Compact design
- Short circuit protection
- Current limiting
- Fused output
- Selectable output (6V,12V or 24V)
- Simple installation
- LED power indicator
|
|
These modules are a complete regulated power supply and battery charger in one compact package. With the appropriate transformer they can be configured to deliver either 6V, 12V or 24V DC. Voltage selection is via an on board DIP switch. Both models inco |
 |
M8550 |
|
- 12V cut off point: 9-10V
- 24V cut off point: 19.2-20.3V
- Relay contact rating: 7A @ 30VDC
- LED indicators:
- Green: AC
- Red: 12VDC
- Blue: 24VDC
- Connections:
- AC input: Terminal block
- AC output: Grey wire leads
- DC Quick-connect terminal (battery side)
- On-board male spade terminal
- Dimensions 60 x 45 x 22 mm.
|
|
Compatible with both 12 and 24V batteries, this cut off module prevents deep discharge of SLA backup batteries in security & UPS backup systems. This ensures longer battery service life. Simple in-line connection between battery and control panel. Cut off |
 |
M8620B ROHS
|
|
|
|
This compact adaptor simply plugs into your car's cigarette lighter socket, and allows you to power many portable appliances.
Fantastic for portable radios, TVs, CD players, electronic games, calculators etc. Includes reversible polarity connectors and |
 |
A0291 NEW
|
|
- Suits Ni-MH, N-Cd, Li-ion & LiFePO4
- Intelligent fast charging up to 2A
- Independent charging slots
- LCD screen
|
|
This intelligent charger has two independent charging slots to charge any combination of Ni-MH, Ni-Cd, Li-ion, or LiFePO4 cells at the same time. |
 |
M8521A |
|
- Suitable for all 6V and 12V lead acid and gel batteries
- Suits battery recharging or maintenance (may be permanently connected).
- Protection against short circuit
- Ideal for battery storage or seldom used vehicles
- Light weight ‘plug in’ design
- Ring terminal or crocodile clip connection
|
|
This 6V/12V battery charger maintainer offers 600mA charging suitable for lead, gel cell and lead-acid batteries, including maintenance-free batteries. |
 |
A0289A |
|
- Charges 2 cells at once
- Charging / Fully charged indication
- Powered by any USB charger at home or in the car
- Compatible with Lithium-Ion, NiMH and NiCd cells
- Over-charge protection
- Short-circuit protection
- Reverse polarity protection
- 0V activation function to charge the Li-ion cells with Protection PCB design
|
|
This compact USB battery charger gives you the flexibility of charging both lithium ion (Li-Ion), nickel metal hydride (Ni-MH) and nickel cadmium (Ni-Cd) cells. USB charging allows it to be connected to any mains or car charger. |
 |
Q3203 |
|
- Input: DC 1.5V (1pc LR03 battery): 1-5 columns (POOR) ; 6-10 columns (FAIR) ;11-18 columns (GOOD)
- Battery tester for: 1.5V, 3V button cells and 1.5V, 3V, 9V Cylindrical cell( non-rechargeable lithium)
- Sizes for cylindrical cells include: AA/AAA/AA/C/D/N/CR-V3/2CR5/CRP2/9V/CR2/CR123A .
|
|
Allows quick voltage testing on consumer battery cells, including rechargeable cells. Suitable for use with AAA, AA, C, D, 9V, CR123A, CR2, CRV3, 2CR5, CR-P2. |
 |
A0290A |
|
- Charges 4 x AA/AAA or 2 x 9V cells at once
- Charging / fully charged indication
- Powered by any USB charger at home or in the car
- Compatible with NiMH or NiCad cells
- Over-charge protection
- Short-circuit protection
- Reverse polarity protection
|
|
Charges up to four AA/AAA or 2 x 9V Ni-MH or Ni-Cad cells at once for keeping your devices powered up. Indicators display charging mode at a glance. Automatically stops once cells are charged. |
