12V 12Ah Lithium LiFePO4 Battery 4.8mm/F1
SL4547A
$145.00 per ea |
|
|---|---|
| Quantity | Price |
| ea | $145.00 |
| 4+ | $132.00 |
| 10+ | $118.50 |
| per ea | |
| Packaging | |
| All prices shown are (inc. GST) | |
Overview
This 12V 12Ah LiFePO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. LiFePO4 also provide more usable life per cycle, allowing for longer run times by holding a higher voltage until capacity is almost exhausted. These batteries will also maintain 80-90% charge when in storage - far higher than their lead acid counterparts. The latest generation in maintenance free batteries is here!
Each battery is fitted with an internal battery management system to provide safe charging and discharging at all times. This system provides internal short circuit, over temperature and under/over voltage cut off. Can be wired in series and/or parallel. Regardless of your wiring configuration it is technically best to individually charge each battery to 100% capacity using the same charger before connecting them. This ensures all batteries are at the same terminal voltage and will charge/discharge evenly.
Factory supplied at 30% charge for safety compliance. Must be charged fully before use.
Suitable for recharging with the mains battery charger models listed in the accessories below.
Excessive temperatures over 65ºC can effect the ABS housing. Need to be well ventilated in warm conditions. Not for use in engine bays.
IMPORTANT NOTE: A fixed installation of this battery in a recreational vehicle such as a caravan, camper or 4WD must adhere to Australian Standard AS/NZS 3001:2. We recommend all customers familiarise themselves with the standards requirements before using these batteries in fixed installations of this type. A professional installer should be consulted when a fixed battery installation is required in a recreational vehicle.
What are LiFePO4 type batteries?
Check out our handy article explaining the benefits of using LiFePO4 batteries.
Each battery is fitted with an internal battery management system to provide safe charging and discharging at all times. This system provides internal short circuit, over temperature and under/over voltage cut off. Can be wired in series and/or parallel. Regardless of your wiring configuration it is technically best to individually charge each battery to 100% capacity using the same charger before connecting them. This ensures all batteries are at the same terminal voltage and will charge/discharge evenly.
Factory supplied at 30% charge for safety compliance. Must be charged fully before use.
Suitable for recharging with the mains battery charger models listed in the accessories below.
Excessive temperatures over 65ºC can effect the ABS housing. Need to be well ventilated in warm conditions. Not for use in engine bays.
IMPORTANT NOTE: A fixed installation of this battery in a recreational vehicle such as a caravan, camper or 4WD must adhere to Australian Standard AS/NZS 3001:2. We recommend all customers familiarise themselves with the standards requirements before using these batteries in fixed installations of this type. A professional installer should be consulted when a fixed battery installation is required in a recreational vehicle.
Features
- 5 year warranty.
- Internal battery management system for safe charging and discharging.
- Drop in replacement for standard lead acid 12Ah batteries
- Half the weight of traditional lead acid batteries.
- Less discharge when in storage compared with traditional lead acid batteries.
- Longer service life compared to lead acid.
- Longer run time compared to lead acid.
What are LiFePO4 type batteries?
Check out our handy article explaining the benefits of using LiFePO4 batteries.
Information & Downloads
- Altronics Code: SL4547A
- I/N: 16969
- Barcode: 9321758241073
- Shipping Weight: 1.65000Kg
- Packaging Sizes
- EACH: 1
- CARTON: 6
- PALLET: 300
- SHPPER: 360
- Printed Catalogue Page 271
- Large Image 1
- Datasheet
- LiFePO4 Fact Sheet
- Guide To Recovering From Safe/Sleep Mode
- AS/NZS 3001.2 Installation Guide
Specifications
- For extended specfications, please refer to our datasheet PDF download
- General
- Dimensions: 151L x 98W x 101Hmm
- Overall Weight: 1.3kg
- Terminal Type: F1
- Connection: 12-48V max 4 in series, no limit in parallel.
- Note: When used in series each battery will need to be discharged to cut off before connecting so that all cells are all balanced.
- Case Material: ABS
- Case IP Rating: IP65
- Certification: CB/CE
- Shipping Class: UN3480, Class 9
- Battery Module
- Nominal Voltage: 12.8V
- Capacity: 12Ah
- Charging Voltage: 14.8V max, (Recommended 14.2V)
- Discharging Voltage: 8.8V max, (Recommended 10.8V)
- Charging Current: 12A max, (Recommended 2.4A)
- Max Constant Discharge: 12A
*Specifications are subject to change without notice.
Warranty & Returns
5 YEARS
We offer 5 years warranty on this product from its date of purchase. This is available from Altronics stores, online purchases or Altronics resellers. In accordance with our full warranty terms we will repair, replace or refund if goods you have purchased from us are defective.
30 DAY MONEY BACK GUARANTEE
Not withstanding our warranty policy, if you are dissatisfied with our goods or service you may return the goods within 30 days of our despatch date. Simply contact us for a return authorisation number and we will refund your purchase in full, less transport costs on receipt of goods. All returned goods must be in as sold condition including all packaging, instructions, invoices etc.
