|
Description |
Downloads |
Specs |
Ordering |
|
 |
A3607 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts a HDMI source device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
These wireless extension cables provide a simple way to send 1080p 60Hz signals from a HDMI source device to TV or monitor in another room up to 50m away (line-of-sight). |
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
A3608 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts from a USB type C device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
HDMI wireless sender capable of sending 1080p 60Hz signals from your device to a TV or monitor in another room up to 50m away (line-of-sight). |
 |
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
 |
S8864A NEW
|
|
- Sturdy adjustable back stand
- 1280x800 resolution
- USB PVR recording support
- HDMI input
- AV input
- HD tuner
- Headphone output
- SD card slot
- IR Remote control
|
|
A must have for your next caravan, boating or camping trip. This portable 14 inch TV allows you to enjoy high definition entertainment on the go thanks to its in-built lithium battery. |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
 |
X0604C NEW
|
|
- FM transmitter
- Easily portable
- Dual USB car charger
- USB Port for playing music
- Car battery voltage monitor
|
|
Works as a hands free system, retransmitting audio over your FM radio for calls plus plays audio from your phone. Fitted with USB C 20W PD charger. |
 |
C9021B NEW
|
|
- Hybrid Active Noise Cancelling
- Be heard loud and crystal clear with FutureTour. The device is shielded with proprietary technology that continuously monitors and measures outside noise and cancels it with the opposite signal. The advanced audio signal processing smartly eliminates the need for a mic arm and reduces background noises.
- Long Play Battery
- FutureTour never kills your vibe. Offering you 40 hours of continuous playtime and amazes you with quick charging to continue listening all day.
- Crystal-Clear Call
- FutureTour features an advanced mic system with HD Voice that provides clarity in conversation.
- All-Day Comfort with Soft Fit Foam Cover
- Enjoy your music in comfort with a beautifully finished newly developed foam cover. FutureTour has the highest quality soft material that provides less pressure on the ears while keeping out external sounds.
- Built Better Sound
- FutureTour headphones deliver carefully balanced, high-fidelity audio for a quality listening experience.
- Faster connection and enhanced connection
- Experience faster and more stable connections with our wireless 5.2 technology, so you can move freely without any interruptions for an unparalleled wireless listening experience.
- Auxiliary Cable
- Running out of battery and you're almost on the way to reaching the finish line? FutureTour gives you an add-on feature of aux cable connection so you can continue listening.
|
|
The Hifuture Futuretour headphones provide excellent noise canceling performance, allowing you to work and listen without interference from outside sources of noise. |
 |
P8034 NEW
|
|
|
|
A double width wallplate with matching fascia cover. |
 |
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
 |
A3247 NEW
|
|
- Supports four 4K @ 60Hz sources.
- Combines up to four sources onto one display.
- RS-232 controllable via third party software.
- Audio extraction via S/PDIF & stereo RCA.
- HDMI 2.0b, HDCP 2.2/1.x compliant.
- 18Gbps video bandwidth.
- Up to 8 display modes.
- Seamless display switching.
- EDID management.
- Includes IR remote.
|
|
This product is designed for the purpose of connecting four 4K @ 60Hz UHD HDMI sources, and displaying each on a single display |
 |
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3104 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 48Gbps video bandwidth
- Supports resolutions up to 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM supported
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.
- 2x1 switch output, auto switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
|
|
Offering 8K @ 60Hz resolution switching, this 2 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
A3081F NEW
|
|
|
|
The 4 port HDMl 4K switch lets you share a display with four HDMl™-enabled A/V devices. |
 |
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
C9014C NEW
|
|
- Detachable cable with both 6.35mm and 3.5mm jack inputs
- High quality audio reproduction with low latency
- Extra-large thick earmuffs for comfort and noise isolation
- Coiled cable for added durability and tangle prevention
- Adjustable headband with rotatable earmuffs
- Folding design for added portability
|
|
Exceptional quality headphones suitable for use as studio monitors or high fidelity music appreciation. They provide superb reproduction and are very comfortable. The headphones produce balanced sound with a wide dynamic range. |
 |
C9037C NEW
|
|
- Bluetooth 5.0 offers superior range (up to 20m) & audio quality - plus automatic connection.
- LED power display
- Auto power on, automatic pairing
- Comfortable to wear
- Can be used during intense sports and activities
- Double-eared design, each earphone can be used independently
- Large battery capacity can be used as an emergency mobile phone power bank (2000mAh capacity)
|
|
Keep your earbuds charged on the go with the new Bluetooth® 5.0 True Wireless Earbuds. The case features an in-built powerbank to replenish the charge on the earbuds when you're away from power. |
 |
L2015A NEW
|
|
- Precise antenna specifications within the desired UHF frequency band
- Boomlock™ manufacturing technology used to secure elements
- New mounting clamp for easier and safer installation
- Ultrasonically sealed balun housing for maximum reliability
- PCB balun for true matching and lowest insertion loss
- 4G filter included
- Strong and lightweight aluminium construction
- Designed and manufactured in Australia
|
|
The Hills Antenna Tru-Max 18 4G antenna is a superior phased array antenna used for regional UHF areas. |
 |
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
 |
L2012A NEW
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
 |
C9038A NEW
|
|
- Superbly constructed with secure fit ear hooks for all day wearing.
- Compact charging case keeps your earphones charged up and ready to go.
- On ear design provides comfort without sacrificing audio quality.
- Great audio performance for a wide variety of listening activities.
- Bluetooth 5.3 chipset for better transmission reliability.
- Auto power on with automatic pairing.
- Suitable for use when exercising (sweat resistant design).
|
|
Hate in ear earphones? No worries! These new true wireless bluetooth 5.3 open ear (OWS) headphones are perfect for you - they’re sweat resistant, light weight and provide 8hrs of listening time. |
 |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
H8232B NEW
|
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 17"-32" weighing up to 6kg. Includes 2 USB ports. |
 |
M9487 NEW
|
|
- Output Voltage: 14V DC 150mA
- Operating Voltage: 230-240V AC
- F-Type Female Connections
- Short Circuit Protection
- Fully Compliant with Australian and New Zealand Safety and MEPS Regulations
|
|
14V DC 150mA plugpack with F-Type socket arrangement designed to plug in line with Kingray range of masthead amplifiers. |
 |
PC5970 NEW
|
|
|
|
Flylead Wallplate fitted with HDMI high speed with Ethernet (2.0) connection. |
 |
PA7427 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 10m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
C9001C NEW
|
|
- Suits devices with 3.5mm TRRS jack
- In-built microphone with button for phone calls
- 1.2m cable
- High performance driver for great audio quality
- High gloss white finish
|
|
Lightweight universal earphones with in-line microphone and level controller. |
 |
PA7432 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 30m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
PP6882A NEW
|
|
|
|
Slim profile for fitting behind cabinets. Brush plate for cable entry through walls etc. Fitted to Clipsal Pro wallplate. |
 |
PC5962 NEW
|
|
|
|
HDMI and USB type A connections fitted to a Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. Rear is fitted with 150mm fly leads with HDMI and USB type A socket for easy connection. |
 |
M9493 NEW
|
|
- Output Voltage: 18V DC 1000mA
- Operating Voltage: 230-240V AC
- F-Type Male Connector
- Short Circuit Protection
- Fully Compliant with Australian and New Zealand Safety and MEPS Regulations
|
|
PSK18M. Kingray’s power supplies have constantly maintained their reputation as the highest quality and most reliable power supplies to the antenna industry. They feature posistor protection circuitry and fully comply with Australian and New Zealand Energy Standards. |
 |
A3107 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for four HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any four display devices. |
 |
PC5963 NEW
|
|
|
|
HDMI and USB type B connections fitted to a Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. Rear is fitted with 150mm fly leads with HDMI and USB type A socket for easy connection. |
 |
P5968 NEW
|
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead wallplate fitted with USB Type C. Supplied with two facia covers to suit your decor. |
 |
P7462A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
M9489 NEW
|
|
|
|
17.5V AC 100mA plugpack with F type socket arrangement designed to plug in line with Kingray range of masthead amplifiers. |
 |
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
 |
P6188 NEW
|
|
|
|
10m SpeakOn connector to SpeakOn connector audio lead. Made with 2 core flexible cable connecting 1+ & 1- of the connector. |
 |
P7463A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
 |
PP6880 NEW
|
|
|
|
This blank wallplate fits a standard electrical wallbox. It features a removable clip in insert which can be machined by OEMs to suit different connections or switches as required. |
 |
P7464A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. 40m |
 |
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
 |
L2011A NEW
|
|
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- Elevation / Tilt bracket included
- Can be vertically or horizontally mounted
- UV stabilised plastics
- Band 4 and Band 5 UHF Antenna
|
|
A compact multi element UHF band 4/5 antenna for inner metro area use. Provides a maximum gain of 9dB. Fitted with F-Type connection for easy installation. Durable all metal design. |
 |
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
 |
PP6883A NEW
|
|
|
|
Slim profile for fitting behind cabinets. Brush plate for cable entry through walls etc. Fitted to Clipsal Pro wallplate. |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
