|
Description |
Downloads |
Specs |
Ordering |
|
|
N2087 NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
|
D0520 NEW
|
|
- High 65W output for high capacity devices such as laptops
- 20,000mAh capacity
- 74Wh capacity - OK for air travel
- USB type A and type C outputs on front panel
- Study aluminium casing.
|
|
This 20,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
|
P8164 NEW
|
|
- Great for the workbench - connect your mains devices and charge your smart devices!
- USB C PD charging - 20W.
- USB A Type charging (max 2.1A).
- 10W wireless charging in-built for your phone.
- 2 standard GPO outlets.
- Compact low profile case.
- 1.5m mains connection cable.
|
|
Ideal for the work bench, this 2 way power extension board features 2 x type A USB chargers and 20W USB type C PD charging output. Plus a 10W wireless charger holder to keep your phone charged up while you work. |
|
D0521 NEW
|
|
- High 100W outputs for high capacity devices such as laptops
- 30,000mAh capacity
- 111Wh capacity - NOT SUITABLE FOR AIR TRAVEL.
- USB type A and type C outputs on front panel
- Study aluminium casing.
- Torch with 3 modes on back panel
|
|
This 30,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
|
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
|
D2208A NEW
|
|
- Qi Wireless Charging
- Motorised to fit your phone automatically
- Comes with a USB Type C lead
- Safely use navigation apps in the car
- Air vent spring mount
- Suction cup mount
|
|
This 15 Watt Qi Wireless Charging Universal Phone Car Mount will not only charge your phone with its wireless fast charge feature but it will also allow you to safely use navigation apps in the car. |
|
S4737A NEW
|
|
- Nominal Capacity: 3500mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 3350mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1700mA
- Charging Time: Standard charge : 4hours
- Max. Charge Current: 2000mA (ambient temperature 25°C)
- Max. Discharge Current: 8A (continuous discharge)
- Discharge Cut-off Voltage: 2.65V
- Cell Weight: 50.0g max
- Cell Dimension: Height: 65.25mm max, Diameter: 18.55mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -10 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
M8971A NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. |
|
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
|
D2321 NEW
|
|
|
|
A stylish bedside or desktop radio alarm clock with in-built 15W wireless charging for your phone. |
|
M8623C NEW
|
|
- Standard USB charging and QC 3.0 charging ports.
- Easy to use - just plug in and turn on your ignition to charge.
- Great for keeping your devices charging whilst in the car.
- Sleek design with light up ring so you can find it at night.
- Battery voltage meter in-built.
|
|
This dual charger allows you to power up to two devices in your car. Max combined current output is 5.5A. |
|
S4732A NEW
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ± 0.05 V
- Nominal Voltage: 3.63V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 45.0g max
- Cell Dimension: Height : 65.00mm max, Diameter : 18.40mm max
- Operating Temperature: Charge : 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature: 1 month: -20~60°C, 3 months: -20~45°C, 1 year: -20~25°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
SL4576BT NEW
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-120Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. With Bluetooth monitoring in-built. |
|
M8969 NEW
|
|
- MEPS efficiency level V
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC 2A switch mode plug pack. |
|
S4736A NEW
|
|
- Nominal Capacity: 2600mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 2550mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1300mA, Rapid charge : 2600mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 5200mA (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.75V
- Cell Weight: 47.0g max
- Cell Dimension: Height: 65.00mm max, Diameter: 18.40mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -20 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
P8600C NEW
|
|
- EN50521:2008 approval suitable for AS/NZS 5033:2012 standard.
|
|
Water & dust proof - IP68 rated. Commonly used on photovoltaic solar panel arrays. Fully sealed design is suitable for use in exposed installations. Rated 30A |
|
M8994A NEW
|
|
- Slimline and lightweight case design reduces the need to carry bulky chargers around.
- 112W power delivery 2.0 output for modern USB C type devices.
- Auxiliary USB type A charging output (2.4A max).
- Compatible with a wide range of brands and models which utilise USB C type charging.
- Wide AC input range (100-240V AC) allows overseas use when paired with standard travel adaptors.
- Includes power cable.
|
|
This slim & lightweight 112W USB-C power delivery (PD) charger offers fast recharging for MacBooks, Nintendo Switch and other type “C” devices. |
|
M8658 NEW
|
|
- Length: 300mm
- Cable type: 2 x 8AWG
- Input Connection: Anderson 50A 2 Pole
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Fuse: In-line 50A Maxi blade fuse
- Output Quantity: 2pc
- AC current rating: 50A
- DC current rating: 50A
- Current Draw: 50A
|
|
This Anderson style ring terminal adaptor cable allows you to permanently connect an Anderson style connection cable to your vehicles battery. |
|
PB8264 NEW
|
|
|
|
All feature 10A overload circuit breaker and 0.9m lead. Black. |
|
M8865 NEW
|
|
- Power delivery passthrough up to 100W.
- Portable and lightweight design.
- 5 way USB type C charging up to 20W per port (dependant on connected power supply).
- Weighs less than 100 grams!
|
|
Ideal for the workbench, the office or even at home. This compact and portable 5 port USB C extension charger hub provides multiple ports for charging devices up to a total output of 100W. |
|
M8561A NEW
|
|
- 88% efficient switchmode power supply design.
- Protections: overload / over voltage / short circuit / under voltage / reverse polarity.
- 5A max connected load. 650mA battery charging circuit.
- LEDs provide quick status indication.
- Fits a standard size 7.2Ah 12V SLA battery.
- Patented design with simple wall mount installation.
- 100% full load burn-in tested.
- 2 year warranty.
|
|
A complete 12V DC power supply and UPS battery backup in one compact enclosure. When operating from 240V, it automatically charges the internal battery (available separately) and powers the connected load (max 5A). |
|
S4739A NEW
|
|
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
A0292 NEW
|
|
- Suits Ni-MH, N-Cd, Li-ion & LiFePO4
- Intelligent fast charging up to 2A
- Independent charging slots
- LCD screen
|
|
This intelligent charger has four independent charging slots to charge any combination of Ni-MH, Ni-Cd, Li-ion, or LiFePO4 cells at the same time. |
|
P8434 NEW
|
|
- Fitted with IEC C13 connector and IEC C14 connector.
- 3m metre length.
- 3 x 0.75mm2 conductors.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
IEC Female to IEC Male 3m. Energy Authority approved |
|
P8159 NEW
|
|
- This feature keeps your connected appliances from getting damaged in a power surge condition. These conditions can be storm related or due to local power supply fluctuations. Unprotected power surges can seriously damage or shorten the life of your equipment.
|
|
Provides connection for all your appliances with surge protection and 4 way USB charger (max total 3.1A output. 2.1 single port). |