|
Description |
Downloads |
Specs |
Ordering |
|
 |
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
 |
C0870A NEW
|
|
- In-built wifi (802.11b/g/n) 2.4GHz with smartphone, tablet or PC control
- In-built 2 x 30W RMS amplifier
- Includes active [Master] speaker and passive speaker units - 60W RMS
- High performance Polypropylene woofer and silk dome tweeter
- Supports multi-room/zone installations
- In-app content, zone and output level control [Smartsonix]
- Tool-FreeAuto Locking Mechanism
- Phoenix Type Connectors
- Tweeter Bridge Handle
- Includes 24V d.c. 2.5A power supply
|
|
Experience wireless music streaming throughout your home with these high performance kevlar cone speakers. They connect to your home wireless router and allow you to stream music directly from your device. Playback can be via stored music, podcasts, Spotify etc. |
 |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1063 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
 |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C2270 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- White RAL9003 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C5215 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
C5216 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
 |
C2039 NEW
|
|
- Material/Colour: Flame retardant antistatic nylon, black
- Rated Power Taps: 5W/10W/15W/30W
- Power Tap Wiring: 5W Yellow, 10W Orange, 15W Red, 30W Brown, Black Common.
- Built-in Audio Transformer: 70V/100V, 5W/10W/15W/30W
- Effective Frequency Range: 300 Hz - 8000 Hz
- Ingress Protection Rating: IP66
- Ambient Temperature: -40 to +55°.
- Relative Humidity: 10% - 95%
- Input AC Resistance: 8±15%Ω
- Sound Coil DC Resistance: 6.4 ±7%Ω
- Explosion Proof Standard: EN IEC 60079-0:2018, EN 60079-1:2014, EN IEC 60079-7:2015/A1:2018, EN 60079-31:2014, EN 60079-14-2014
- Dimensions: 250Ø x 325D mm
- Weight: 4kg
|
|
C 2039 is an anti-static nylon material, anti-ultraviolet and durable explosion-proof speaker with ATEX / IECEx certification for dust and gas atmosphere. |
 |
C0891A NEW
|
|
- Stylish low profile sloping profile case.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- 100V line monitoring capacitor.
- Twin cone driver.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
 |
C0895A NEW
|
|
- Stylish low profile sloping profile case.
- Twin cone driver.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- Side mount volume level control with evacuation system override relay
- 100V line monitoring capacitor.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
 |
C2026A NEW
|
|
- Impedance: 8Ω
- Power Rating: 25W
- IP Rating: IP65
- SPL: 108dB, 1W @ 1m
- Freq. Resp.: 250Hz - 10kHz
- Dimensions: 300 x 180 x 290mm
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
 |
C1035 NEW
|
|
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality birch plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- Dual 8" woofers in each subwoofer unit (total 4 drivers)
- Column features multiple Italian designed Lavoce® 3" high power drivers.
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
|
|
This 1200W PA column speaker system is a plug and play active speaker system ideal for small live shows, small parties, bands, musicians or anywhere foreground sound reinforcement is required. |
 |
C1034 NEW
|
|
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality birch plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- 12" driver in each subwoofer unit.
- Column features multiple Italian designed Lavoce® 3" high power drivers.
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth 5.0 module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
|
|
This 1000W PA Column Speaker system is a plug and play active speaker system ideal for small live shows, small parties, bands, musicians or anywhere foreground sound reinforcement is required. |
 |
C2271 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- Black RAL9004 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
P8099 NEW
|
|
|
|
All slimline wall mounting plate to suit C5215 and C5216 Biema slimline subwoofers. |
 |
C5162 NEW
|
|
- Lightweight & easy to carry.
- Simple top mounted controls.
- Handy device holder slot in top.
- USB & microSD playback and recording.
- Wired aux input
- Wired microphone inputs (2)
- FM radio
- Multi-function front panel display
- True wireless stereo operation - pairs to a second unit for more sound.
- RGB party light ring.
- 3600mAh battery for up to 8 hours use.
- 2 x 40W RMS 6.5" woofers & 1" tweeter.
|
|
The Dynalink Entertainer Pro XL provides great sound for your next gathering with True Wireless Stereo (TWS) and RGB party lighting for added atmosphere. 3-8 hours use per charge. Lightweight and ready to set up anywhere. |
 |
C5161 NEW
|
|
- Lightweight & easy to carry.
- Simple top mounted controls.
- Handy device holder slot in top.
- USB & microSD playback and recording.
- Wired aux input
- Wired microphone inputs (2)
- FM radio
- Multi-function front panel display
- True wireless stereo operation - pairs to a second unit for more sound.
- RGB party light ring.
- 3600mAh battery for up to 8 hours use.
- 40W RMS 6.5" woofer & 1" tweeter.
|
|
The Dynalink Entertainer Pro X provides great sound for your next gathering with True Wireless Stereo (TWS) and RGB party lighting for added atmosphere. 3-8 hours use per charge. Lightweight and ready to set up anywhere. |
 |
C2065 NEW
|
|
- Ideal for the following applications; siren, playback or pre-recorded content or real time reinforment through microphone
- High on SPL, small in size
- Weather proof housing
- Complimentary grey colour housing
- Mountable to either the bonnet or top of vehicle
- Heavy duty low profile metal bracket
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
 |
C5205 NEW
|
|
- Subwoofer: 10"
- Frequency response: 30Hz - 250Hz (-10dB), 50Hz - 250Hz @ 18dB / octave.
- Inputs: Line level RCA, Speaker level binding posts.
- Output power: 200 Watts @ THD< 0.5%
- Enclosure material: Matte black laminated wood, black speaker cloth grille.
- Power: 240V AC input.
- Dimensions: 442 x 246 x 410mm.
|
COMING SOONThis item is arriving soon. |
This stunning high power home cinema subwoofer adds plenty of bottom end bass reproduction to any home theatre or hi-fi system. Very compact considering the high spec 10 inch bass driver employed. The inbuilt 200W amp accepts either a speaker or a line level input. |
 |
C2035 NEW
|
|
|
|
A durable weather resistant horn speaker designed for use in conjunction with the Merlaud IP communicator PA system. It features an in-built amplifier and can be powered by 12-24V DC power supply or PoE as required. The sturdy mounting bracket is u shaped and secured with stainless steel hardware. |
 |
C2095 NEW
|
|
- Active speaker with network audio source built in
- High performance ARM processor
- Built-in amplifier
- Integrates with the Merlaud IP communicator system over a standard network switch.
- Tool free easy spring ceiling mounting
- White RAL 9010 epoxy coated aluminium grill and ABS chassis.
- Communication delay <50ms.
|
|
A compact low profile in-ceiling speaker designed for use in conjunction with the Merlaud IP communicator PA system. It features an in-built amplifier and can be powered by 12-24V DC power supply or PoE as required. Requires 170mm mounting hole. |
