|
Description |
Downloads |
Specs |
Ordering |
|
 |
C0870A NEW
|
|
- In-built wifi (802.11b/g/n) 2.4GHz with smartphone, tablet or PC control
- In-built 2 x 30W RMS amplifier
- Includes active [Master] speaker and passive speaker units - 60W RMS
- High performance Polypropylene woofer and silk dome tweeter
- Supports multi-room/zone installations
- In-app content, zone and output level control [Smartsonix]
- Tool-FreeAuto Locking Mechanism
- Phoenix Type Connectors
- Tweeter Bridge Handle
- Includes 24V d.c. 2.5A power supply
|
|
Experience wireless music streaming throughout your home with these high performance kevlar cone speakers. They connect to your home wireless router and allow you to stream music directly from your device. Playback can be via stored music, podcasts, Spotify etc. |
 |
C5215 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
C5216 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
A4414 NEW
|
|
- Balanced input and outputs
- 3 pin XLR connections
- Mic or line level operation for individual input/outputs
- Loop output for connection to multiple distributors
- Compact half rack 1RU cabinet
- 24V DC operation
- Australian designed and manufactured
|
|
This compact half rack distributor comprises of a single 3 pin balanced XLR input to four 3 pin balanced XLR outputs. Great for splitting a single audio source out to multiple zones without interference between channels. |
 |
A4496 NEW
|
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4496 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
 |
H1312 NEW
|
|
|
|
Tapped to suit metric M2 machine Screws
Length: 16mm
Pack Qty: 1000 |
 |
S9367D NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording 10 channels up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 8 x 15.4W PoE network interfaces
- One internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.8
- Support Plug and Play
- Support network cable extended mode - Max. 200M
|
|
This multi channel network video recorder offers 8MP resolution recording at 25fps for up to 10 cameras (or 14ch of 5MP @ 25fps). |
 |
A4022A NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
 |
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
 |
K8600A NEW
|
|
- Simple set up - get printing within 20 minutes.
- Worry free automatic levelling.
- Easy to understand user interface with colour display.
- Auto filament loading and unloading.
- Direct extrusion for most common filament types.
- Ultra stable design with rigid dual Z-axis.
- Compact design fits easily on the workbench.
- Standard 0.4mm nozzle.
- 220 x 220 x 250mm build volume.
|
|
The Ender-3 V3 SE 3D printer is an enhanced and upgraded version of Creality's hugely popular Ender 3 platform. Creality have built in more features and optimisation for an intuitive and efficient FDM 3D printing experience. This Ender 3 has been tailored for those wanting a no compromises approach to features. |
 |
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
P7465A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. |
 |
H5394B NEW
|
|
|
|
Captive nuts M6
Pack Qty: 1000 |
 |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
S9847 NEW
|
|
- 4MP 1440P quad HD recording
- 2.4GHz Wi-Fi
- 123° wide angle lens
- Secure cloud storage
- Motion detection up to 10m away
- Colour & IR night vision modes
- Micro SD card storage up to 128GB
- Two way audio intercom
- Cloud AI detection
- Indoor or outdoor use
- Rechargeable li-ion battery (via USB or solar panel)
- IP65 rated
- Siren & flashing light
- 3 activity zones
- Simply DIY install - no cabling!
|
|
A 4MP security camera that requires no wiring at all due to its internal battery and external solar panel (which can be remote mounted up to 4m away in a sunny spot). |
 |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
 |
S9833B NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.7-13.5mm Motorized Lens
- IR Distance 25M Max.
- With Internal POE and External SD Card Slot
|
|
This compact 8MP dome/turret camera utilises a 1/2.8' SONY Starvis Back-Illuminated CMOS Sensor for a crisp clear view day or night. |
 |
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
 |
A4515 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
|
S9832C NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS Sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.7-13.5mm Motorized Lens
- IR Distance 25M Max.
- Internal POE
|
|
A day/night high resolution IP dome camera with multi-codec support. |
 |
N1114A NEW
|
|
- Top grade monocrystalline panels
- Durable encapsulated panels with anti-reflective design
- Tough canvas outer with double stitched panels
- Metal hanging hooks on each panel
- Weather resistant design
- 5m Anderson connection cable
|
|
Provide portable charging power for your campsite set up. Double stitched panels, durable webbing straps and metal hanging loops and zippered cable pocket. Folds up and secures with velcro for a fast getaway! 5m Anderson cable connection.
|
 |
P7464A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. 40m |
