|
Description |
Downloads |
Specs |
Ordering |
|
|
M9449C NEW
|
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
- Includes multiple interchangeable tips.
|
|
Tips Included:
2.1 x 5.5mm
2.5 x 5.5mm
1.35 x 5.5mm
1.7 x 4.0mm
1.5 x 5.0mm
0.75 x 2.35mm |
|
P1946A NEW
|
|
- Metal connector bodies
- Type A or Type C charging input connector.
- Micro USB, Apple Lighting onr USB Type C charging output connectors.
- 1.2m length.
- Duable braided sheath and rubber strain reliefs.
|
|
A handy 1.2m charging cable with three ends to suit USB type C, Apple lightning and micro USB devices. Handy to keep around the house or in the car glovebox |
|
M8513 NEW
|
|
|
|
Supplied pre-terminated in a 30cm loop with mating SAE bullet connectors on each end. 18AWG cable 7.5A rated. |
|
S4343 NEW
|
|
- Max DC switching: 75V @ 200A / 1500W
- Contact material: Silver alloy
- Coil resistance: 120Ω
- Max coil power: 4.8W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for automotive applications such as alarms, driving lights, horns, fog lights etc. |
|
S4344 NEW
|
|
- Max DC switching: 75V @ 100A / 2800W
- Contact material: Silver alloy
- Coil resistance: 30Ω
- Max coil power: 4.8W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for automotive applications such as alarms, driving lights, horns, fog lights etc. |
|
P6136 NEW
|
|
|
|
Uses high quality, low loss Mil-Spec ML RG316 50 ohm coaxial cable. 15cm SMA Female to TS-9 Right Angled Male RG316 Lead |
|
M8822B NEW
|
|
- Slimline and lightweight case doesn't foul with other power outlets when plugged in.
- 27W power output for small/medium USB C type devices.
- Maximum current output 5A
- Compatible with a wide range of brands and models which utilise USB C type power.
- Wide AC input range (100-240V AC) allows overseas use when paired with standard travel adaptors.
|
|
This slimline plugpack style USB power supply is ideal for powering and charging a variety of USB type C equipped devices, such as laptops, game consoles, phones, IoT boards (including Raspberry Pi) and other Type C devices. |
|
Z6587 NEW
|
|
- Easy, wireless communication up to 100m
- Create your own network of connected devices.
- Compact, on-board antenna
- 915MHz is suitable for amateur use in Australia.
- No soldering necessary
- 2x LEDs: Rx/Tx indicator, and user-controllable
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
|
|
With this Transceiver users can unlock some very cool capabilities like collecting data from some distant sensor, or remote-controlling hardware. |
|
M9487 NEW
|
|
- Output Voltage: 14V DC 150mA
- Operating Voltage: 230-240V AC
- F-Type Female Connections
- Short Circuit Protection
- Fully Compliant with Australian and New Zealand Safety and MEPS Regulations
|
|
14V DC 150mA plugpack with F-Type socket arrangement designed to plug in line with Kingray range of masthead amplifiers. |
|
P7750 NEW
|
|
|
|
Anderson style grey 175A DC power connector. |
|
S4737A NEW
|
|
- Nominal Capacity: 3500mAh (0.2C, 2.75V discharge)
- Minimum Capacity: 3350mAh(0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.7V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1700mA
- Charging Time: Standard charge : 4hours
- Max. Charge Current: 2000mA (ambient temperature 25°C)
- Max. Discharge Current: 8A (continuous discharge)
- Discharge Cut-off Voltage: 2.65V
- Cell Weight: 50.0g max
- Cell Dimension: Height: 65.25mm max, Diameter: 18.55mm max,
- Operating Temperature: Charge: 0 to 45°C, Discharge: -10 to 60°C
- Storage Temperature 1 year: -20~25°C, 3 months: -20~45°C, 1 month: -20~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. |
|
P7814 NEW
|
|
|
|
This Anderson Style (SB50 120A type) connector provides easy connection to solar panels and auxiliary batteries/appliances. Snap fit cover provides protection from dust and moisture when not in use. Includes connectors. |
|
PM7883 NEW
|
|
- Cavities: 3
- Contact Size: 16 (13 Amps)
- Current Rating: 13 Amps
|
|
World famous Deutsch weatherproof IP68 flange mount connectors for automotive and industrial wiring. DT3-1-L012. Genuine Deutsch brand. |
|
S9265A NEW
|
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x USB C Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. USB C 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
|
P0772A NEW
|
|
- Locking 20 A / 240 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. Power Out version. NAC3FXXB-W-S 20A 240V. SAA approved. |
|
P0795A NEW
|
|
-
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
The Neutrik NL4FXX-W-S 4-pole speakON cable connector has a screw terminal assembly and chuck type strain relief for cable diameters 6 to 12 mm. |
|
P7816 NEW
|
|
|
|
This Dual Anderson Style (SB50 50A type) connector provides easy connection to solar panels and auxiliary batteries/appliances Snap fit cover provides protection from dust and moisture when not in use. Includes connectors. |
|
S4166 NEW
|
|
- Nominal voltage: 250V AC
- Nominal current: 6A
- Cradle input voltage: 220-240V AC/DC
- Nominal coil voltage: 60V DC
- Pick-up voltage (max): 45V DC
- Drop-out voltage (min): 3.0V DC
- Max voltage: 90V DC
- Coil resistance: 16,600Ω. (+/- 15%)
- Max switching power AC: 1500VA
- Max switching power DC: 180W
- Contact material: Silver alloy
- Max coil power: 210mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 4000V AC between coil & contact
- Life: 60,000 electrical, 10 million mechanical
|
|
A super slimline DIN rail mount relay designed for industrial switching applications. Suits standard 35mm DIN rail. Supplied with 60V DC coil relay. |
|
P0773A NEW
|
|
- IEC EN 60320-1 / UL 60320-1 / CSA C22.2 No. 60320-1 certified, thus accepted as a component for cord sets acc. to IEC 60799 / UL 817 and equipment acc. to IEC 62368-1
- Ergonomic design with slip-proof two-component moulded housing
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
- Unique NEUTRIK locking bushing and strain relief for cable diameters 6 mm to 12 mm
- Easy to assemble because the strain relief locks with the insert mechanically and aligns with the housing
- Superior NEUTRIK quality standard, extremely robust and reliable
- Easy and reliable twist lock system
- Improved kink protection by two-component bushing
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. NAC3FXXA-W-S 20A 250V. SAA approved. |
|
M2152C NEW
|
|
- Primary voltage: 240V AC
- Total VA rating: 12.5VA
- Insulation: Class E (120°C)
- Magnetising current: <45mA
- Temperature rise: <65°C
- Regulation: ˜11%
- Recommended AC fuse: 250mA
- Weight: ˜561g
- Primary connection: 200mm fly leads
- Secondary connection: 490mm fly leads
- AS/NZS 61558.2.6 approval: Q042028
- AS3108 approval: CS/813/Q
- Secondary Voltages Available: Voltage :12.5V / Current : 1A
|
|
Powertran EI-Core 240V AC mains transformer with 1A centre tapped secondary configuration. 6.25V and 12.5V secondary voltages available at 1A current output. Primary and secondaries fitted with 200mm flyleads. Fully electrical authority approved for AS/NZS 61558.2.6. |
|
M9489 NEW
|
|
|
|
17.5V AC 100mA plugpack with F type socket arrangement designed to plug in line with Kingray range of masthead amplifiers. |
|
Z6424 NEW
|
|
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
|
|
The Raspberry Pi Pico W is perfect for IoT and wireless projects, better still, it's such an affordable 32-bit microcontroller that is packed with peripheries including WiFi. |
|
X3061 NEW
|
|
|
|
Barrel up rough terrain with this remote control dune buggy thats perfect for small kids and big kids! 1:43 scale. |
|
Z6588 NEW
|
|
- A great guide to get you started with Raspberry Pi, Pico, or Micro:bit
- Backup power provided by a Supercapacitor - no batteries required!
- Tracks year, month, day, weekday, hour, minutes, seconds
- Schedule events or alarms
- Automatically switches between main power and backup power
- High accuracy clock - within 30 seconds per year
- PiicoDev Connector, compatible with Qwiic and STEMMA QT (3.3V Only)
|
COMING SOONThis item is arriving soon. |
The PiicoDev Precision Temperature Sensor features a low-power, high precision TMP117 with 16-bit resolution and an accuracy of ±0.1°C (across -20°C to +50°C) with no calibration required. |
|
S4999DP NEW
|
|
- High energy density (3V) with a flat and low self-discharge.
- Design, safety, manufacturing, and qualification follow Procell’s stringent battery standards, which incorporate parts of the ANSI and IEC battery standards.
- Economically packaged.
- Child safety: tamper-proof pack with double blister so that it is impossible for a child to open without scissors and a bitter taste layer applied on the back of the cell to discourage swallowing.
- Operating temperatures from -30°C to 70°C.
|
COMING SOONThis item is arriving soon. |
Procell Lithium Coin Intense 2032 industrial batteries are designed to deliver reliable and safe power in professional devices. |