|
Description |
Downloads |
Specs |
Ordering |
|
 |
S8866 NEW
|
|
- HDMI input
- AV input
- 1080p Full HD tuner
- 1080p Full HD resolution 23.6” LED panel
- 3.5mm headphone output
- USB PVR recording support
- IR Remote control
- Ideal for 4WD’s caravans, boats and camper vans
- 240V AC (plugpack) or 12V DC operation
- VESA 75 x 75mm compatible mounting
|
|
This 23.6” wide screen TV is designed for 12V vehicles, 4WDs, caravans and campers. Full HD 1080p. |
 |
P8164 NEW
|
|
|
|
Ideal for the work bench, this 2 way power extension board features 2 x type A USB chargers and 20W USB type C PD charging output. Plus a 10W wireless charger holder to keep your phone charged up while you work. |
 |
N2019D NEW
|
|
- Suits lead acid type batteries
- Suits lithium chemistry batteries, including Li-NiCoMn & LiFePO4.
- Adjustable daytime start, night off mode
- Auto battery identification
- Intelligent PWM charging
- Temperature compensation
- USB 2A charger (4 ports)
- Overload, reverse polarity, reverse discharge, over heat, under voltage protections
|
|
Suitable for permanent installations of lead acid, gel battery and lithium chemistry (including Li-NiCoMn & LiFePO4) solar panel systems. |
 |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
 |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3107 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for four HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any four display devices. |
 |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
A3104 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 48Gbps video bandwidth
- Supports resolutions up to 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM supported
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.
- 2x1 switch output, auto switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
|
|
Offering 8K @ 60Hz resolution switching, this 2 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
S0949A NEW
|
|
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20Ωm max
- Insulation: 500V DC 100Ωm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Rating: 4A 125V AC, 2A 250V AC
- Contact: 20M Ohm max
- Insulation: 500V DC 100M Ohm min
- Dielectric Strength: 1min 1000V AC
- Operating Temperature: -25°C ~ +85°C
- Electrical Life: 50,000 cycles
- Switch Type: NO contacts, Screw terminal SPST
- Contact Rating: 2A @ 250V AC, 4A 12V DC
- Panel Thickness: 1-10mm
|
|
Heavy duty vandal resistant switch for indoor/ sheltered outdoor use eg carparks, building entrances. Momentary.
Switch type: Screw terminal SPST
Contact rating: 5A @ 250V AC
Panel Thickness: 1-10mm |
 |
S4344 NEW
|
|
- Max DC switching: 75V @ 100A / 2800W
- Contact material: Silver alloy
- Coil resistance: 30Ω
- Max coil power: 4.8W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for automotive applications such as alarms, driving lights, horns, fog lights etc. |
 |
S4343 NEW
|
|
- Max DC switching: 75V @ 200A / 1500W
- Contact material: Silver alloy
- Coil resistance: 120Ω
- Max coil power: 4.8W
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min): 500V AC between open contacts
- 750V AC between coil & contact
- Connection: (Coil 6.3mm & M6 bolt for contact load)
- Life: 100,000 operations electrical, 10 million mechanical
- Dimensions: ≈46W x 46L x 77H mm
|
|
Suitable for automotive applications such as alarms, driving lights, horns, fog lights etc. |
 |
S4145 NEW
|
|
- Max AC switching rating: 25A @ 250V
- Max switching power AC: 6250VA
- Contact material: Silver alloy
- Coil resistance: 1405Ω
- Max coil power: 410mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min): 1000V AC between open contacts, 5000V AC between coil & contact
- Electrical life: 80,000 operations
- Mechanical life: 10 million operations
- Dimensions: ≈29W x 12.7L x 16H mm
- Sealed construction (immersion cleanable).
|
|
25A SPDT relay. PCB mount style. 12V DC coil.
Fully sealed construction makes it ideal for immersion cleaning and large scale manufacturing |
 |
S4144 NEW
|
|
- Max AC switching rating: 25A @ 250V
- Max switching power AC: 6250VA
- Contact material: Silver alloy
- Coil resistance: 351Ω
- Max coil power: 410mW
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min): 1000V AC between open contacts, 5000V AC between coil & contact
- Electrical life: 80,000 operations
- Mechanical life: 10 million operations
- Dimensions: ≈29W x 12.7L x 16H mm
- Sealed construction (immersion cleanable).
|
|
25A SPDT relay. PCB mount style. 12V DC coil.
Fully sealed construction makes it ideal for immersion cleaning and large scale manufacturing |
 |
A0292 NEW
|
|
- Suits Ni-MH, N-Cd, Li-ion & LiFePO4
- Intelligent fast charging up to 2A
- Independent charging slots
- LCD screen
|
|
This intelligent charger has four independent charging slots to charge any combination of Ni-MH, Ni-Cd, Li-ion, or LiFePO4 cells at the same time. |
 |
A0291 NEW
|
|
- Suits Ni-MH, N-Cd, Li-ion & LiFePO4
- Intelligent fast charging up to 2A
- Independent charging slots
- LCD screen
|
|
This intelligent charger has two independent charging slots to charge any combination of Ni-MH, Ni-Cd, Li-ion, or LiFePO4 cells at the same time. |
 |
X0213 NEW
|
|
- Durable and light weight
- Easily portable with handle & shoulder strap
- USB rechargeable
- Can be used as a power bank
- Made from high impact ABS material
- 7 light operation modes
- Fixed USB cable
|
|
Ideal for camping, roadside emergencies and a variety of uses around the home. It can be used as an LED lantern, torch and USB battery bank for keeping devices charged when camping. |
 |
TP1978A NEW
|
|
|
|
Features ergonomic soft rubber handle. Chrome vanadium shaft. Ideal for equipment manufacturers, installers, technicians, etc. |
 |
TP1975A NEW
|
|
|
|
Features ergonomic soft rubber handle. Ideal for equipment manufacturers, installers,
technicians, etc. |
 |
TP1970A NEW
|
|
|
|
Features ergonomic soft rubber handle. Ideal for equipment manufacturers, installers,
technicians, etc. |
 |
R4888 NEW
|
|
- Tolerance: ±20%
- Pitch: 7.4mm
- Diameter: 16mm
- Height: 25mm
- Voltage: 63V DC
- Surge Voltage: 79V DC
- Ripple Current: 930mA
- Temperature Range: -40°C to +105°C
|
|
High temperature rating (105C ) for constant reliable operation
Note: Sleeve colour may be black or green. |
|
R4864 NEW
|
|
- Tolerance: ±20%
- Pitch: 5mm
- Diameter: 10mm
- Height: 12.5mm
- Voltage: 25V DC
- Surge Voltage: 32V DC
- Ripple Current: 380mA
- Temperature Range: -40°C to +105°C
|
|
High temperature rating (105C ) for constant reliable operation
Note: Sleeve colour may be black or green. |
|
R4824 NEW
|
|
- Tolerance: ±20%
- Pitch: 2.5mm
- Diameter: 6.3mm
- Height: 11mm
- Voltage: 25V DC
- Surge Voltage: 32V DC
- Ripple Current: 142mA
- Temperature Range: -40°C to +105°C
|
|
High temperature rating (105C ) for constant reliable operation
Note: Sleeve colour may be black or green. |
THIS PRODUCT CONTAINS A BUTTON BATTERY.