|
Description |
Downloads |
Specs |
Ordering |
|
 |
R9572B NEW
|
|
|
|
Please note different part numbers for OEM reels. Please contact us for OEM reel pricing. |
 |
A3608 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts from a USB type C device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
HDMI wireless sender capable of sending 1080p 60Hz signals from your device to a TV or monitor in another room up to 50m away (line-of-sight). |
 |
A3607 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts a HDMI source device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
These wireless extension cables provide a simple way to send 1080p 60Hz signals from a HDMI source device to TV or monitor in another room up to 50m away (line-of-sight). |
 |
L2012A NEW
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
 |
M8024 NEW
|
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
A compact 24V 300W inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
 |
HD5809 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
COMING SOONThis item is arriving soon. |
An open frame hinged wall mount 9RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
 |
SG4554A NEW
|
|
- Physical Size
- Length: 166mm
- Width: 175mm
- Height (Total inc. tabs): 125mm
- Weight: 8.8kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 28Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 390A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F12)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 9A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
Deep cycle batteries are designed for regular discharge. These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
 |
HD5806 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
COMING SOONThis item is arriving soon. |
An open frame hinged wall mount 6RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
K8670 NEW
|
|
- Over 26 robots can be assembled as well as custom projects
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- Superbot brings you endless fun in building, playing then battling with their car models together which makes it the new pop in any kids' theme party.
- The set is packed in a clear storage box to help children develop a good habit of packing and collecting their own toys.
|
|
A 400pc set allowing kids to build up to 26 different projects, and create designs of their own. Includes control unit and intelligent sensors (2) that allow building of line tracking, obstacle avoiding and following robot designs. Blocks are compatible with other major brands. Fully programmable using Scratch. Includes storage box. |
 |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
 |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
Z6302J NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 4GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
 |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
 |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
 |
D4211 NEW
|
|
- Five 10/100/1000Mbps RJ45 ports
- Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable
- Supports PoE power up to 65 W for all PoE ports*
- Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and Easy Smart Configuration Utility simplify configuration
- Fanless design lowers energy consumption and eliminates operating noise
|
|
Professional 5-Port Gigabit Easy Smart Switch with 4-Port PoE+
Easy to Use, Multi-Purpose PoE Switch with Powerful Performance |
 |
D4346 NEW
|
|
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 delivers Wi-Fi to an area of up to 350 square metres. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267 Mbps and works with the major internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.
|
|
This Deco M5 Whole-Home Mesh Wi-Fi Router System is the ultimate whole-home Wi-Fi solution with comprehensive security and filtering. It delivers fast, uninterrupted Wi-Fi to every room, improving coverage, speed and reducing dead spots. Deco is also easy to set up and grows as you add devices to your home. Dual band AC1300. |
 |
A2265SS NEW
|
|
 Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 40W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
C0895A NEW
|
|
- Stylish low profile sloping profile case.
- Twin cone driver.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- Side mount volume level control with evacuation system override relay
- 100V line monitoring capacitor.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
 |
S9447 NEW
|
|
- 1080p 30fps Full HD video
- 48MP still shot capability
- Internal battery with solar recharging
- Adjustable triggering, intervals and duration.
- Loop recording
- Large aperture lens
- WiFi and Bluetooth wireless connectivity
- Clear night and day imaging
- IP66 rated
- Bluetooth 5.0 with low power consumption
- Full automatic IR filter
- Built-in microphone & speaker
- Moon phase/temperature/time/date stamp functions
|
|
This HD solar powered IP66 Wi-Fi / Bluetooth trail camera is a wildlife and surveillance camera for monitoring activity in areas which are difficult to reach with traditional surveillance solutions. |
 |
Z6296 NEW
|
|
|
|
Get your brand new Raspberry Pi Zero 2 W with most of the essentials in this kit. |
 |
DA0893 NEW
|
|
|
|
The PowerShield external Comms Box (PSECB) allows two comms cards to be operational, whilst using the UPS intelligent slot and PSECB over UPS serial port simultaneously. Includes a 240Vac / 12Vdc power pack. |
 |
D0520 NEW
|
|
- High 65W output for high capacity devices such as laptops
- 20,000mAh capacity
- 74Wh capacity - OK for air travel
- USB type A and type C outputs on front panel
- Study aluminium casing.
|
|
This 20,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
 |
T2128B NEW
|
|
- Up to 4 hours of run time
- Set includes 18 4mm driver bits.
- Quick charging
- LED downlight
|
|
This USB rechargeable electronic screwdriver features a fully adjustable torque drive for fast and accurate driving of precision screws such as those found in modern high tech devices. Two way switch provides direction control. It is the perfect addition to the workbench for anyone who regularly repairs electronics. |
 |
T2130 NEW
|
|
- Three-speed Torque
- Versatile all in one tool
- Unique case design houses all 180 pieces, keeping every bit easily accessible.
- Essential tool for everything from device repairs to professional mechanical maintenance.
- Automatic power off after 60 seconds.
- Automatic power on at button press.
|
|
The Jakemy JM-8193 is an electronic screwdriver set suitable for various tasks, from home repairs to professional maintenance. The multifunctional handle offers three-speed torque options suitable for assembly and disassembly of modern high tech devices |
THIS PRODUCT CONTAINS A BUTTON BATTERY.
