|
Description |
Downloads |
Specs |
Ordering |
|
 |
A2260SS NEW
|
|
 Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 10W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C2039 NEW
|
|
- Material/Colour: Flame retardant antistatic nylon, black
- Rated Power Taps: 5W/10W/15W/30W
- Power Tap Wiring: 5W Yellow, 10W Orange, 15W Red, 30W Brown, Black Common.
- Built-in Audio Transformer: 70V/100V, 5W/10W/15W/30W
- Effective Frequency Range: 300 Hz - 8000 Hz
- Ingress Protection Rating: IP66
- Ambient Temperature: -40 to +55°.
- Relative Humidity: 10% - 95%
- Input AC Resistance: 8±15%Ω
- Sound Coil DC Resistance: 6.4 ±7%Ω
- Explosion Proof Standard: EN IEC 60079-0:2018, EN 60079-1:2014, EN IEC 60079-7:2015/A1:2018, EN 60079-31:2014, EN 60079-14-2014
- Dimensions: 250Ø x 325D mm
- Weight: 4kg
|
|
C 2039 is an anti-static nylon material, anti-ultraviolet and durable explosion-proof speaker with ATEX / IECEx certification for dust and gas atmosphere. |
 |
A4496 NEW
|
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4496 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
 |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
A4658 NEW
|
|
- Simple in-line connection
- Provides additional power for long cable runs
- Aluminium case
- 24V DC power input (power supply included)
- Australian designed and manufactured
|
|
Designed to provide external power injection to the new A 4660 Redback Paging Console. |
 |
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
 |
A4424 NEW
|
|
- Six mic / line input channels.
- Two outputs via XLR/RCA 1V balanced.
- Level, bass and treble control on all inputs.
- Adjustable input sensitivity.
- Phantom power selection on each input.
- Route signals to each output or both outputs.
- Includes power supply
- 1RU 19” rack mount case.
- Australian designed & assembled
|
|
New to the Redback mixer stable, this model incorporates six inputs which can be routed to 1 of 2 outputs or both as the installation requires. Inputs can be configured for either RCA line level signals or 3 pin XLR balanced mic signals. |
 |
PC0446 NEW
|
|
|
|
3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
PC0456 NEW
|
|
|
|
5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
A2275 NEW
|
|
- All wallplates assembled by Altronics are supplied with two facia clip on covers. These are designed to match your current decor. Simply clip on the desired cover after installation.
|
|
A combination of level control attenuator with 11 positions and 5 way audio source selector. |
 |
A2272 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
 |
A4414 NEW
|
|
- Balanced input and outputs
- 3 pin XLR connections
- Mic or line level operation for individual input/outputs
- Loop output for connection to multiple distributors
- Compact half rack 1RU cabinet
- 24V DC operation
- Australian designed and manufactured
|
|
This compact half rack distributor comprises of a single 3 pin balanced XLR input to four 3 pin balanced XLR outputs. Great for splitting a single audio source out to multiple zones without interference between channels. |
 |
A2261B NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
A2270 NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
 |
A2262B NEW
|
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
S4457 NEW
|
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Designed primarily for PA speaker line installations with two PA systems active in a building. Useful for applications where a dedicated evac speaker system is running along side a dedicated background music system. |
 |
A4661 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
A4465 NEW
|
|
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Balanced audio is relayed back to a Redback solutions receiver. |
 |
A4515 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
 |
A2232A NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4467 NEW
|
|
|
|
A handy remote pairing plate to suit the Redback A4515/20 BT 5.0 receiver units. Connection is via any standard 4 core cabling back to the main receiver unit. This allows users to remote activate the pairing mode on the Redback A4515/20. Switch is fitted to a standard size Australian single gang electrical wallplate. |
 |
CL8892D NEW
|
|
- USB rechargeable with internal lithium battery
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback® 700 channel receiver unit (C8890D). |
