Fuses
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
30A In Line Automotive Blade Fuse HolderS6036 ROHS |
|
| Suits standard size automotive blade fuses. Cable Spec Diameter: 2.9mm Size: 12AWG Temp rating: 105deg Max voltage: 600V | |
 |
30A Chassis / Panel Mount Blade Fuse HolderS5970 ROHS |
| Panel mount automotive blade fuse holder to suit standard size blade fuses (18.7 x 19.1mm in size with 5mm blades.) 4.8mm spade lug connection. Suits panel or chassis mount into enclosures or vehicle panels. | ||
 |
150A Chassis / Panel Mount Automotive Blad...S6024 ROHS |
|
| This high current fuse block uses standard automotive type blade fuses. It features a single screw terminal 150A input and 6 x spade terminal 25A outputs. 150A total (25A per fuse) Max. Max Voltage 32VDC. Tin plated copper connections. Size: 93Wx40Hx67mm | |
 |
2A 5x20 (M205) 250V Slow-Blow FuseS5655 ROHS |
| 250V. 2A. Glass fuse. Slow blow type. M205 (5x20). | ||
 |
M205 6.3A PCB Mount Covered Fuse HolderS5985 ROHS |
|
| PCB mount with protective cover. 6.3 amps at 250V AC. 1.2mm PC pins at 23mm between centres | |
 |
3AG 3A 12VDC In Line Fuse HolderS6001 ROHS |
| In line type with leads (approx 140mm each). 3 amps at 12V DC. | ||
|
5A 5x20 (M205) 250V Slow-Blow FuseS5659 ROHS |
| 250V. 5A. Glass fuse. Slow blow type. M205 (5x20). | ||
|
3.15A 5x20 (M205) 250V Slow-Blow FuseS5657 ROHS |
| 250V. 3.15A. Glass fuse. Slow blow type. M205 (5x20). | ||
 |
M205 10A Chassis Mount Fuse HolderS5991 ROHS |
| Panel Mount. 10 amps at 250V AC. Cap retains fuse when removed. | ||
 |
15A 5x20 (M205) 250V FuseS5763 ROHS |
| 250V. 15A. Glass fuse. Available in M 205 and 3AG sizes. Used in many appliances. | ||
|
10A 5x20 (M205) 250V Slow-Blow FuseS5662 ROHS |
| 250V. 10A. Glass fuse. Slow blow type. M205 (5x20). | ||
 |
30A PCB Mount Blade Fuse HolderS6040 ROHS |
| 30A PCB Mount Automotive Style Blade Fuse Holder. PCB Holes at 2.5mmØ. | ||
|
1A 5x20 (M205) 250V Slow-Blow FuseS5650 ROHS |
| 250V. 1A. Glass fuse. Slow blow type. M205 (5x20). | ||
 |
3AG 30A Chassis Mount Fuse HolderS6010 ROHS |
| Heavy duty 30 amps at 250V AC. Simple single hole mounting and 6.3mm quick connect terminals. | ||
 |
500mA (3AG) 250V Slow-Blow FuseS5671 ROHS |
| 250V. 500mA. Glass fuse. Slow blow type. 3AG (32 x 6mm). | ||
 |
133 Degree Celcius Thermal FuseS5632 ROHS |
| 133 Deg. Celsius. As found in heat-producing appliances such as coffeemakers and hair dryers. Acts as a safety device to disconnect electrical current to the heat source in case of malfunction. | ||
|
3AG 10A Chassis Mount Fuse HolderS6000 ROHS |
| Panel mount. 10 amps at 250V AC. | ||
 |
0.3A 100W 50V PTC FuseR4545A ROHS |
|
| Self resets when fault condition is removed. Hold Current is the maximum current at which the device will not trip at 20C. Trip Current is the minimum current at which the device will always trip at 20C. | |
 |
M205 10A Chassis Mount Safety Type Fuse Ho...S5992 ROHS |
| Panel mount. Cap is unscrewed by screwdriver. 10A @ 250V AC. UL/CSA Approved. Insulation resistance: 100M Ohm @ 500V DC Contact resistance: 5m Ohm @ 1A DC Dialectric strength: 1500V min (for 60 seconds) Material: UL94V0 thermoplastic. | ||
|
3A 6x32 (3AG) 250V Slow-Blow FuseS5681 ROHS |
| 250V. 3A. Glass fuse. Slow blow type. 3AG (32 x 6mm). | ||
 |
20A 6x32 (3AG) 250V Ceramic FuseS5948 ROHS |
| Ceramic fuse. Available in M 205 and 3AG sizes. Used in many appliances. These are sold in singles. | ||
|
500mA 5x20 (M205) 250V FuseS5714 ROHS |
| 250V. 500mA. Glass fuse. Available in M 205 and 3AG sizes. Used in many appliances. | ||
 |
5AG 30A Chassis Mount Fuse HolderS6030 ROHS |
|
| Panel mount. Mounting hole 22mm. Bolt hole centres 34 mm. Rated to 30 amps at 250V AC. Uses 10mm x 37mm 5AG fuses. UL Approved. | |
 |
0.5A 100W 50V PTC FuseR4550A ROHS |
|
| Self resets when fault condition is removed. Hold Current is the maximum current at which the device will not trip at 20C. Trip Current is the minimum current at which the device will always trip at 20C. | |
|
77 Degree Celsius Thermal FuseS5631 ROHS |
| As found in heat-producing appliances such as coffeemakers and hair dryers. Acts as a safety device to disconnect electrical current to the heat source in case of malfunction. |
