|
Description |
Downloads |
Specs |
Ordering |
|
 |
H4996 |
|
- Black textured finish
- Modular design
- Four piece ABS construction
|
|
Similar in appearance to the deluxe full rack cases, these half rack modular cases offer great verstility to any product. |
 |
H0202 |
|
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
F1150 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Connection: Flying Lead
Air Flow: 27CFM
Input Power: 1.4W
Speed: 2350 RPM
Noise Level: 25dBA
Material: Thermoplastic
Size: 80 x 80 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
 |
S5970 ROHS
|
|
|
|
Panel mount automotive blade fuse holder to suit standard size blade fuses (18.7 x 19.1mm in size with 5mm blades.) 4.8mm spade lug connection. Suits panel or chassis mount into enclosures or vehicle panels. |
 |
H0203 |
|
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
S6037 |
|
|
|
This in-line blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. Blade Type. |
 |
H8575 ROHS
|
|
|
|
Standard DIN rail in 1M length. 35mm top hat type. |
 |
S6032 |
|
- Uses standard automotive blade fuses
|
|
This panel / chassis mount fuse holder uses standard automotive blade fuses (18.7 x 19.1mm in size with 5mm blades). 150A screw terminal input and 6.3mm spade outputs (25A per circuit max). 32V DC max. Not suitable for use with S 5540 series resettable breakers.
Size: 47W x 86L x 36Hmm |
 |
H3996B |
|
|
|
Multi pack of hook and loop binding ties. Simply loop around multiple leads to hold them securely in place. Pack of 10 (2 of each colour).
Length: 100mm |
 |
S6024 ROHS
|
|
- Single screw terminal input
- 6x 25A spade terminal outputs
- Tin plated copper connections
|
|
This high current fuse block uses standard automotive type blade fuses. It features a single screw terminal 150A input and 6 x spade terminal 25A outputs. 150A total (25A per fuse) Max. Max Voltage 32VDC. Tin plated copper connections. Size: 93Wx40Hx67mm |
 |
T1466 |
|
|
|
Rare earth magnets contain neodymium compound combined with ferrite (anisotropic) to give extremely powerful magnetic properties compared to standard ferrite magnets. They come encased in nickel jackets to protect the inner material. 10 x 3mm Pk4 |
 |
H1600A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
10g Tube |
 |
H1610A |
|
- Colour: White
- Carrier: Silicone
- Thermo-Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W/mK
- Thermal resistance: 0.12ºC-cm2/W
- Dielectric breakdown: 18Kv/mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200KcP
- Density: 2.2g/cm3
- Temperature range: -50 -200ºC
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
150g Tube |
 |
F1025 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC Motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL 94V-0
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan
- Input Power: 4.1W
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.54W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10 - +70°C
- Storage Temperature: -40 - +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ± 10% at 24V DC
- Air Flow: 41.0 CFM (3.33 CFM min)
- Static Pressure: 0.18 Inch-H2O (0.13 Inch-H2O min)
- Acoustic Noise: 33.0dB (A) (37.2dB max)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ @ 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for 1 minute, 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic Restart
|
|
Connection: Flying Lead
Air Flow: 41CFM
Input Power: 1.8W
Speed: 3200 RPM
Noise Level: 33dBA
Material: Thermoplastic
Size: 80 x 80 x 25mm
Bearing Type: Sleeve Bearing
Blade Type: Plastic
Operating temperature: -10 - +70 deg. C
Storage temperature: -40 - +70 deg. C |
 |
H4304A |
|
- Cable Size: 3 - 6.5mm
- Chassis Hole: 12.5mm
- Spanner Size: 19mm
- Colour: Black
- Material:PA (NYLON), UL 94
- Hermetic seal: NBR, EPDM
- O-Ring: EPDM
- Working temperature:
- - 40℃ to100℃ in static state
- Instantaneous heat resistance up to 120℃
- -20℃ to 80℃ in dynamic state
- Instantaneous heat resistance up to 100℃
|
|
Multi-piece cable gland with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
F1131 |
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 525g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.14/0.12A
- Rated Power: 24/22W
- Operating Voltage Range: 150-250V AC
- Starting Voltage: 150V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2500/2750 RPM ±10%
- Air Flow: 112/124 CFM
- Static Pressure: 0.30/0.28 Inch-H2O
- Noise Level: 44/47dB(A)
|
|
Connection: Terminals
Air Flow: 112CFM
Input Power: 24W
Speed: 2500 RPM
Noise Level: 44dBA
Material: Diecast Alum. Frame
Size: 120 x 120 x 38mm
Bearing Type: Ball Bearing
Blade Type: Plastic |
 |
H3825 ROHS
|
|
|
|
Plastic extruded duct with cavity to protect or conceal cables across doorways or down walls. Supplied with self adhesive tap for easy installation. |
 |
F1028 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance Protection
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 295g
- Dimensions: 120 x 120 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.09/0.08A
- Safety Current: 0.10/0.09A
- Rated Power: 18/16.5W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2000/2300 RPM ±10%
- Air Flow: 64/78 CFM
- Static Pressure: 0.13/0.16 Inch-H2O
- Noise Level: 43/46dB(A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Connection: Flying Lead
Air Flow: 77CFM
Input Power: 18W
Speed: 2000 - 2200 RPM
Noise Level: 45dBA
Material: Diecast Alum. Frame
Size: 120 x 120 x 25mm
Bearing Type: Sleeve Bearing
Blade Type: Plastic |
 |
F1050 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 70mA (84mA max)
- Rated Power Consumption: 0.84W (1.01W max)
- Safety Power Consumption: 1.01W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Quality 80mm Sunon brand cooling fan. Suitable replacement for computer case and power supplies. Flying lead connections. |
 |
H5039 ROHS
|
|
- Aluminium powdercoated rear panel
- Steel powdercoated top, bottom & side panels.
- 19” rack mountable
- Internal strips adjustable along the entire height and length of the case
- 4 strips provided
- Metal carry handles
- Internal separation panel provided
- Stylish aluminium anodised black front panel
|
|
This customisable rack case allows vertical or horizontal mounting of sub-chassis within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided. |
 |
F1160 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 218g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 383mA
- Rated Power Consumption: 9.2W
- Operating Voltage Range: 10~27.6V DC
- Starting Voltage: 10V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ±10% at rated voltage
- Air Flow: 138 CFM
- Static Pressure: 0.36 Inch-H2O
- Noise Level: 48dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Voltage: 24V DC
Input Power (W): 9.2
Overall Size (mm): 120 x 120 x 38
Speed (RPM): 3100
Air Flow (CFM): 138
Noise (dBA): 48
Bearing Type: Maglev
Connection Type: F/Lead
Frame Material: Thermoplastic
|
 |
S6045 |
|
|
|
An inline fuse holder to suit the Automotive Maxi Blade Fuse ranging from models; S5343 to S5348. |
 |
H5038 ROHS
|
|
- Aluminium powdercoated rear panel
- Steel powdercoated top, bottom & side panels.
- 19” rack mountable
- Internal strips adjustable along the entire height and length of the case
- 4 strips provided
- Metal carry handles
- Internal separation panel provided
- Stylish aluminium anodised black front panel
|
|
This customisable rack case allows vertical or horizontal mounting of sub-chassis' within the case. PCB's and modules can be easily mounted along the full length and height of the case to the 4 racking strips or to the internal sub chassis panel provided. |
 |
F1125 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 1.56W (1.80W max)
- Safety Power Consumption: 1.68W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ±10% at rated voltage
- Air Flow: 41.0 CFM
- Static Pressure: 0.18 Inch-H2O
- Noise Level: 33.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Connection: Flying Lead
Air Flow: 37.5CFM
Input Power: 4.1W
Speed: 3200 RPM
Noise Level: 36dBA
Material: Thermoplastic
Size: 80 x 80 x 25mm
Bearing Type: Maglev
Blade Type: Plastic |
 |
H7931 |
|
- UV stabilised ABS.
- Suitable for use in demanding environments from -40°C to +120°C.
- Includes internal base plate for mounting equipment.
- Stainless steel latches and hardware for longevity outdoors.
- IP66 rated.
|
|
A range of high strength ABS enclosures with UV stabilisation for external use. Suitable for housing terminal boxes, distribution panels, instruments and electrical equipment. Wide temperature range -40 to +120°C for demanding environments. |
