|
Description |
Downloads |
Specs |
Ordering |
|
 |
F1165 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 218g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 833mA
- Rated Power Consumption: 10W
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3100 RPM ±10% at rated voltage
- Air Flow: 138 CFM
- Static Pressure: 0.36 Inch-H2O
- Noise Level: 48dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MEC0381V1-000U-A99. A 12V DC 120mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
F0010A |
|
- Connection: Flying Lead
- Air Flow: 8CFM
- Input Power: 1.1W
- Speed: 7000 RPM
- Noise Level: 32dBA
- Material: Thermoplastic
- Size: 40 x 40 x 10mm
- Bearing Type: Maglev
- Operating temperature: -10 - +70 deg. C
- Storage temperature: -40 - +70 deg. C
|
|
Sunon MF40101V1-1000U-A99. A 12V DC 40mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
S6029 |
|
- Dedicated earth terminals
- Labels for customisation
- Red LED Indicates when fuse is broken
|
|
Uses standard automotive type blade fuses. Dedicated earth terminals for each circuit, plus 100A rated M8 negative & positive terminals. Size: 88W x 88D x 36Hmm |
 |
S6036 ROHS
|
|
- Cable
- Diameter: 2.9mm
- Size: 12AWG
- Temp rating: 105deg
- Max voltage: 600V
|
|
Suits standard size automotive blade fuses.
Cable Spec
Diameter: 2.9mm
Size: 12AWG
Temp rating: 105deg
Max voltage: 600V |
 |
S6042 |
|
|
|
This in-line micro2 blade fuse tap is designed to turn one slot into two, allowing you to add a circuit to your vehicle easily. The max installation rating is up to 10 Amps. |
 |
D0010 |
|
|
|
A handy set of hardware to suit most computer equipment including hard drive screws, standoffs, case & fan screws. Includes case. 228pcs. |
 |
F1030 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Lubricated sleeve bearing system
- Frame Material:Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 550g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.125/0.11A
- Rated Power: 20/19W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2550/2900 RPM ±10%
- Air Flow: 85/105 CFM
- Static Pressure: 0.25/0.30 Inch-H2O
- Noise Level: 43/48dB (A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1800V AC for one second
|
|
Sunon DP201A-2123HST.GN. A 240V AC 120mm Sunon Sleeve Bearing Cooling Fan with diecast aluminium frame. |
 |
S6109 ROHS
|
|
- SPL Output: 90dB @ 30cm
- Supply Voltage: 1.5 - 24V dc
- Current: 10mA @ 12V dc
- Frequency: 5200Hz ± 500Hz
- Dimensions: 22Ø x 12H mm
|
|
Panel mount piezo buzzer. 30mm between mounting hole centres. 80mm lead.
SPL output: 90dB @ 30cm
Supply voltage: 1.5 - 24V dc
Current: 10mA @ 12V dc
Frequency: 5200Hz ± 500Hz
Dimensions (mm): 22 x 12H |
 |
H5032 ROHS
|
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
These professional 19" rack instrument cases give a professional finish to any project! Perfect for building amplifiers, pre-amps, power supplies etc. The range includes 1RU, 2RU and 3RU sizes with black anodised aluminium front panels. |
 |
H4362 ROHS
|
|
- Cable Size: 4-8mm
- Chassis Hole: 15mm
- Colour: Black
- External Depth from Panel or Chassis: 30mm
|
|
Multi-piece right angle cable glands with rubber clamping ring for sealing cable apertures in weatherproof equipment or speaker enclosures. |
 |
F1045 ROHS
|
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 45g
- Dimensions: 60 x 60 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 85mA (98mA max)
- Rated Power Consumption: 1.02W (1.18W max)
- Safety Power Consumption: 1.07W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3800 RPM ±15% at rated voltage
- Air Flow: 19.3 CFM
- Static Pressure: 0.15 Inch-H2O
- Noise Level: 22.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for once minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
|
|
Sunon EE60251S2-000U-999. A 12V DC 60mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
H5031 ROHS
|
|
- Black anodised aluminium front panel
- 1.5mm aluminium rear panel for easy machining
- Steel sides and removable top and bottom steel panels
- All dimensions conform to the International Standard
- Ventilated lid
- Deluxe finish front panel
- Individually packaged
- Maximum load 30kg
- Supplied in flat pack form - Easily assembled in minutes
|
|
Each finish is available in 1U (44mm), 2U (88mm) or 3U (132mm) high.
Overall depth 255mm.
Mounting hole centres conform exactly to international racking specifications both vertically and horizontally. |
 |
F1110 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 4x 4.3mm holes
- Weight: 15.6g
- Dimensions: 40 x 40 x 10mm
- Electrical Characteristics
- Rated Voltage: 5V DC
- Rated Current: 136mA (157mA max)
- Rated Power Consumption: 0.68W (79W max)
- Safety Power Consumption: 0.83W
- Operating Voltage Range: 3.5~6V DC
- Starting Voltage: 3.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 7000 RPM ±15% at rated voltage
- Air Flow: 8.0 CFM
- Static Pressure: 0.19 Inch-H2O
- Noise Level: 27.3dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF40100V1-1000U-A99. A 5V DC 40mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame. |
 |
F0950 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 105g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 200mA (230mA max)
- Rated Power Consumption: 2.40W (2.76W max)
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4200 RPM ±10% at rated voltage
- Air Flow: 53 CFM
- Static Pressure: 0.30 Inch-H2O
- Noise Level: 44.5dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Sunon GF80251B3-000U-AE9. A 12V DC 80mm Sunon Ball Bearing Waterproof Cooling Fan with thermoplastic frame. IP68 rated fan. |
 |
S6026 |
|
- 6.4mm terminals
- Rubber gasket
- Weatherproof cover
- LED indicator
|
|
This panel mount automotive blade fuse block uses standard automotive type blade fuses (18.7 x 19.1mm in size with 5mm blades). Fitted with weatherproof cover & LED indicator for each circuit. Base is fitted with 6.4mm spade terminals & rubber gasket to prevent water ingress. Max 25A @ 32VDC per circuit.
|
 |
F1046 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 4x 4.3mm holes
- Weight: 33g
- Dimensions: 50 x 50 x 15mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.40W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 7200 RPM ±15% at rated voltage
- Air Flow: 18.6 CFM
- Static Pressure: 0.31 Inch-H2O
- Noise Level: 38.1dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF50152VX-1000U-A99. A 24V DC 50mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
S6019 |
|
|
|
This high current fuse block uses MIDI type fuses. Suits M5 ring terminals. 300A max. Size: 55Wx29Hx20Wmm. |
 |
F1164 |
|
- Mechanical Characteristics
- Motor Design: 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Bobbin Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 220g
- Dimensions: 120 x 120 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 1000mA
- Rated Power: 12.0W
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4500 RPM ±10%
- Air Flow: 150 CFM
- Static Pressure: 0.62 Inch-H2O
- Noise Level: 54dB(A)
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Protection: Automatic restart
|
|
Sunon PMD1212PTB1-A(2).GN. A 12V DC 120mm Sunon Ball Bearing Cooling Fan with thermoplastic frame. |
 |
F1130 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 550g
- Dimensions: 120 x 120 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current (240V AC): 0.11A
- Rated Power (240V AC): 19W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25° Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics (at 240V AC)
- Rated Speed: 3050 RPM ±10%
- Air Flow: 107 CFM
- Static Pressure: 0.32 Inch-H2O
- Noise Level: 50dB(A)
|
|
Sunon DP201A-2123HBT.GN. A 240V AC 120mm Sunon Ball Bearing Cooling Fan with diecast aluminium frame. |
 |
H3830 |
|
- Great on home theatre cabling, computers or gaming system components, even on small equipment hoses.
- Suitable for general purpose use - low temperature, typically indoors or sheltered outdoor use.
- Constructed from braided PET plastic material rated from -75 to 125 degrees C.
- Can be cut easily with common tools such as a hot knife, scissors and other cutters.
- Bends in tight radiuses.
- Offers excellent abrasion resistance.
- Suits single or bundled cables.
- Sold in 5m lengths.
|
|
A cylindrical self closing design which is expandable up to 3 times its original size. -75°C to +125°C. Made from PET plastic. Can be cut with hot knife or scissors. |
 |
H7910 |
|
|
|
Constructed from 1.2mm steel, these heavy duty wall mount enclosure is suitable for mounting electrical switching circuitry and other industrial designs. Panels are coated in a tough, rippled epoxy polyester powder coat in RAL7035. |
 |
H0205 |
|
|
|
Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs. |
 |
F1260 |
|
- Mechanical Characteristics
- Motor Design: 2 phases, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Single direction exhaust
- Mounting Holes: 2x 4.5mm holes
- Weight: 185g
- Dimensions: 97 x 94 x 33mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 600mA
- Rated Power: 7.2W
- Operating Voltage Range: 6~12V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3600 RPM ±10%
- Air Flow: 30.5 CFM
- Static Pressure: 0.92 Inch-H2O
- Noise Level: 55.8dB(A)
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Protection: Automatic restart, polarity protection
|
|
Sunon PMB1297PYB1-AY(2).GN. A 12V DC 97mm Sunon Ball Bearing Cooling Fan with thermoplastic frame.
|
 |
F1150 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80251V3-1000U-A99. A 12V DC 80mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
H4996 |
|
- Black textured finish
- Modular design
- Four piece ABS construction
|
|
Similar in appearance to the deluxe full rack cases, these half rack modular cases offer great verstility to any product. |
