|
Description |
Downloads |
Specs |
Ordering |
|
![A3218B HDMI & Infra-Red HDBaseT Cat5e/6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3218B.jpg) |
A3218B |
|
- 100m Range Max (depeding on cabling and resolution)
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz
- Supports 4K x 2K @ 60Hz
- Supports RS-232 signal bi-directional transmission, baud rate self-adaptive
- Supports LAN transmission wide band IR
|
|
Allows 1080p HDMI signals to be extended up to 100m from their source over a single Cat5e/6 cable, whilst retaining full high definition quality. Built in IR extender allows remote control of source devices. |
![A3605 4K Wireless HDMI Video Sender System](https://images.altronics.com.au/thb/a/A3605.jpg) |
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
![A3218C HDMI over HDBaseT Extender with IR](https://images.altronics.com.au/thb/a/A3218C.jpg) |
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
![A3224 Multi-Zone HDMI UTP Balun Extension System](https://images.altronics.com.au/thb/a/A3224.jpg) |
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
![A3215A HDMI & Infra-Red HDBaseT Cat5e/6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3215A.jpg) |
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
![A3144 HDMI Over Ethernet UTP 4 Port Balun Transmitter](https://images.altronics.com.au/thb/a/A3144.jpg) |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
![A3606 Receiver For 4K Wireless HDMI Video Sender System](https://images.altronics.com.au/thb/a/A3606.jpg) |
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
![A3245 4K HDMI Extender (70m) with USB KVM](https://images.altronics.com.au/thb/a/A3245.jpg) |
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
![A3145 HDMI Over Ethernet UTP 4 Port Balun Receiver](https://images.altronics.com.au/thb/a/A3145.jpg) |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
![A3242A HDMI & One Way Infra-Red Cat6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3242A.jpg) |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
![A3242B HDMI & Bi-Directional Infra-Red Cat6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3242B.jpg) |
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
![A3225 Transceiver For Multi-Zone HDMI UTP Balun Extension System](https://images.altronics.com.au/thb/a/A3225.jpg) |
A3225 |
|
|
|
Transceiver for use with our A3224 multi-zone HDMI extender system. This unit not only acts as a receiver for the incoming signal from the A3224 transmitter but also retransmits the signal so it can be daisy chained with up to 6 additional screens. |
![A3110 HDMI USB KVM Over IP Extender - Encoder](https://images.altronics.com.au/thb/a/A3110.jpg) |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
![A3111 HDMI USB KVM Over IP Extender - Decoder](https://images.altronics.com.au/thb/a/A3111.jpg) |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
![A3140 HDMI Over Ethernet UTP Balun Transmitter](https://images.altronics.com.au/thb/a/A3140.jpg) |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
![A3221A VGA + Audio Balun UTP - Single Channel](https://images.altronics.com.au/thb/a/A3221A.jpg) |
A3221A |
|
- Huge 300m range over a single solid core Cat5e/cat6 cable
- Support for up to 1900 x 1200 resolution
- SVGA and RJ45 output on the transmitter unit.
- Compatible with any TV, monitor or projector with a VGA output.
|
|
Permits audio & video transmission over Cat 5e/6 cable. |
![A3226 Receiver For Multi-Zone HDMI UTP Balun Extension System](https://images.altronics.com.au/thb/a/A3226.jpg) |
A3226 |
|
|
|
Receiver for use with the A 3224 HDMI Extender Kit and the A 3225 HDMI Extender Tranceiver. For multiple screens daisy chained from a single signal source use up to 6 tranceivers with a receiver at the very end. |
![A3138A HDMI over IP Extender Cat5e/6 Transmitter](https://images.altronics.com.au/thb/a/A3138A.jpg) |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
![A3139A HDMI Over IP Extender Cat5e/6 Receiver](https://images.altronics.com.au/thb/a/A3139A.jpg) |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
![A3217D HDMI & Infra-Red Cat5e/6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3217D.jpg) |
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
![A0930 Wireless Infra-Red Remote USB Extender Kit](https://images.altronics.com.au/thb/a/A0930.jpg) |
A0930 |
|
- Compatible with all universal full band carrier frequency infrared remote
- Better IR receive sensitivity (distance), over 7 meters
- Long range transmission up to 100 meters (open space)
- 915.1 MHz RF technology to ignore current 433MHz RF-interference
- FSK modulation:
- Better signal sensitivity than ASK modulation
- Better anti RF-interference than ASK modulation
- Better noise suppression
- Digital encrypted function ensures safety and reliability
- Supports Individual and broadcasting IR control
- Channel pairing function.
|
|
Allows you to repeat infra-red control signals from your TV to remotely located equipment. |
![S9253 Composite AV Cat5e Balun + Infra Red Pair](https://images.altronics.com.au/thb/s/S9253.jpg) |
S9253 |
|
|
|
Transmit clear composite video, stereo audio and infra-red up to 300m over economical Cat 5e/6 cable. Ideal way to send video and audio to a remote location. The infra-red signal also allows you to control your equipment remotely. |
![A1168 Cat5e/6 Infra Red Extension Balun](https://images.altronics.com.au/thb/a/A1168.jpg) |
A1168 |
|
- Foxtel compatible (channel & volume controls only)
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
![A3214 4 Channel Audio UTP Extender Balun](https://images.altronics.com.au/thb/a/A3214.jpg) |
A3214 |
|
- Send mono or stereo audio signals over distances up to 670m
- No power required
- Four channel mono or two channel stereo
- Compact design with simple point to point set up
- Great for distributed audio systems where audio sources are located remotely
- Can be used in commercial or domestic audio systems.
|
|
This compact box converts four RCA audio signals into a UTP RJ45 output for transmission over long distance (up to 670m). May be used for two stereo signals or four mono signals. Ideal for domestic and commercial audio systems requiring audio source. |
![A0920 IR Remote Repeater Kit](https://images.altronics.com.au/thb/a/A0920.jpg) |
A0920 |
|
- IR Details
- Range: 100-300m
- IR Frequency: 20-60kHz
- RF Details
- RF Frequency: 915.1MHz
- Tx Power: 2mW
- Rx Current: 3.8mA
- Rx Sensitivity: -90dBm
|
|
This handy device converts the signal from your remote controls to an RF signal. |