|
Description |
Downloads |
Specs |
Ordering |
|
|
A1056 |
|
- Sleek unobtrusive Flat IR Target for use with Vcommâs RF IR Video Distribution System with IR modulator / video hub emitters.
- Flexible flat cord allows for ease of placement of target.
- Target plugs into compact in-line coaxial connector box using 3.5mm mini-jack
- Light-weight Connector box has mounting brackets for ease of installation
- To facilitate placement, adhesive backing is also included for both target and connector box.
- Receives IR commands from remote controls and send the signals through the Video Hub and emitters to control the AV device at a remote location
- Built-in LED to show acknowledgement of IR commands
- Rejects interference from displays that enters the IR signal line
- Rejects interference from direct sunlight and fluorescent tube lights for accurate IR signal reception
- Powered remotely by modulator (both connector box & target)
|
|
The resi-linx⢠RL-RF210 is a sleek and unobtrusive "Plasma Friendly" Flat IR Target for use in the resi-linx⢠range of RF IR Video Distribution system. The target receives IR commands from remote controls and sends the signal through the Video Hub and Emitters to control the AV device at a remote location. |
|
L2017C
|
|
- F-Type High Performance Balun
- Snap out reflectors
- Stainless Steel screws on connection points
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- 12mm extruded aluminium heavy duty elements
- Tough powder coated finish
- UV stabilised plastics
- Bifurcated rivets - Strongest in the industry
- U-bolts & Clamps fitted
|
|
Deluxe heavy duty VHF digital antenna manufactured with steel boom and extruded elements. |
|
L2011A NEW
|
|
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- Elevation / Tilt bracket included
- Can be vertically or horizontally mounted
- UV stabilised plastics
- Band 4 and Band 5 UHF Antenna
|
|
A compact multi element UHF band 4/5 antenna for inner metro area use. Provides a maximum gain of 9dB. Fitted with F-Type connection for easy installation. Durable all metal design. |
|
L2036
|
|
|
|
For mounting to barge boards and fascias. Galvanised steel construction. 1.8m pole height. |
|
L2012A
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
|
L2015A
|
|
- Precise antenna specifications within the desired UHF frequency band
- Boomlock⢠manufacturing technology used to secure elements
- New mounting clamp for easier and safer installation
- Ultrasonically sealed balun housing for maximum reliability
- PCB balun for true matching and lowest insertion loss
- 4G filter included
- Strong and lightweight aluminium construction
- Designed and manufactured in Australia
|
|
The Hills Antenna Tru-Max 18 4G antenna is a superior phased array antenna used for regional UHF areas. |
|
L2026
|
|
- If used in tin roof or multi-story dwellings, it is best to place the unit close to a window for better reception.
|
|
Provides 28dB (+/- 3dB) gain for clear reliable digital TV reception, plus compatibility with DAB digital radio. Includes desktop stand for vertical or horizontal mounting. May be installed outdoors in a sheltered location. Great for domestic or portable |
|
L2006B
|
|
- Can be mounted vertical or horizontal as required
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- UV stabilised plastics
- Easy to assemble
- Added front directors for better F/B gain
- F-Type Balun with LTE low pass filter
- Ultrasonically sealed balun housing
- Unique compact holding phased array
|
|
Lightweight, entry level antenna for metro/normal signal areas. Digital ready. Suits VHF channels
6-12 & UHF 28-35 channels. |
|
L2024A |
|
- All TV antennas are not able to reliably pick up a signal under a metal (tin) roof. Hence this antenna is only suitable for dwellings with tiled roofs etc. External antennas are required for metal (tin) roof dwellings.
|
|
Indoor diople TV antenna with heavy duty base.
1m 75Ω coaxial lead with moulded PAL connector.
The two antennae can be independently rotated allowing the rabbit ears to be set for the clearest reception you can get. |
|
L2034
|
|
|
|
For mounting to roof valley. Galvanised steel construction. 1.4m pole height. 30mm diameter pole. |
|
L2047 |
|
- Provides up to 20dB gain
- Suitable for domestic use
- Easy in-line connection with PAL cables
|
|
Improves TV antenna reception in poor signal areas by boosting gain up to 20dB. Also suitable for DAB digital radio signals. |
|
L2033A
|
|
- Large base plate allowing for adequate mounting
- Malleable tripod legs designed to be bent to match the pitch of the roof
- Product includes a standard 25mm diameter, 1.1m mast that will suit most antennas
- Strong all steel materials used
- Welded for robust construction
- Hot dipped galvanised for superior corrosion protection
- Supplied with weatherproof cap
|
|
For mounting to steel corrugated roof. Galvanised steel construction. 1.1m pole height. 25mm diameter pole. |
|
L1303B |
|
|
|
Simply connects in line to provide two outlets. ie. TV and FM radio from one TV antenna. |
|
L2008A
|
|
- F-Type Balun with LTE Low Pass Filter
- Folding feature for easy storage
- Designed & engineered in Australia for Australian conditions & Australian digital television transmissions
- UV stabilised plastics
- Horizontal and vertical mounting options
- Elevation/Tilt bracket included
- U-bolts & Clamps fitted
|
|
This UHF Phased array antenna has been specifically designed to operate best in areas where reflections and ghosting are a problem. Due to its design it can be mounted horizontally or vertically. |
|
L2301 |
|
|
|
Weatherproofs connections to masthead amplifiers, antenna baluns, etc.
Suits RG59 and RG6. |