|
Description |
Downloads |
Specs |
Ordering |
|
|
L2048 |
|
- Frequency Range 44-860MHz
- 20dB Maximum Gain
- 10dB Gain Control
- Single Input
- Single Output
- 240V Piggyback Plug
- High Output Figure of 100dB IMR3 (DIN45004B)
- <4dB Noise Figure
- Connectors: F-Type
- Mains Powered 230-240V AC
- 3 Year Warranty.
|
|
This simple TV signal amplifier is ideal for areas where reception is slightly weak. Provides up to 20dB of gain to boost to the signal for improved reception. Includes 2 PAL female to F type male adaptors.
|
|
A1135 |
|
- Converts HD video and audio signals to digital COFDM DVB-T channel
- AVC (MPEG-4) encoding
- 1080P output
- Programmable; channel, network names and LCN
- Full function front LCD for adjustments
- Remote access and control GUI via web browser
- Emergency announcement system control (EAS) input
- Internal fan cooling system for long life span
- 2K/8K carriers
- 1RU rack mountable
- Distributes on any new or existing RF cable
- Built-in IR control allows TV locations to have IR control of AV equipment
|
|
This high definition, HDMI equipped, modulation system allows you to distribute any HD devices (Foxtel, DVD etc) in true HD around the home or business with ease. Each AV input can be assigned its own dedicated TV channel. |
|
M9492 |
|
- Output Voltage: 18V DC 1000mA
- Operating Voltage: 230-240V AC
- 2.5mm DC Connector
- Short Circuit Protection
- Fully Compliant with Australian and New Zealand Safety and MEPS Regulations
|
|
18V DC 1A plugpack with 2.5mm DC socket arrangement designed to plug in line with Kingray range of MATV distribution amplifiers. |
|
A1160 |
|
- Input
- Number of inputs: 1
- Video Input: HDMI
- Video Input Level: 0.7 - 1.4V (Peak to Peak)
- Video mode: PAL
- Audio input: Stereo
- Audio input level: 0.4 to 4.8V (Peak to Peak)
- Output
- Frequency Range: 177.5 MHz to 816.5 MHz (6 to 69)
- HDMI loop through: No
- Output level: 85dB
- MER: >38dB
- Delayed Audio
- Delayed audio output: No
- Delay: -
- Connection type: -
- Modulation
- Video Resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
- Video compression: H.264 AVC (MPEG-4)
- Audio compression: MPEG Layer II / AAC
- Video bitrate SD: 1Mbps to 9Mbps (Default 5Mbps)
- Video bitrate HD: 12Mbps to 24Mbps (Default 24Mbps)
- LCN: AU (APN)
- Carrier: 2K/8K
- GI: 1/32
- FEC: 7/8
- Constellations: 16 QAM/64 QAM
- Management / Programming
- Front LCD: Yes
- Web GUI: Yes
- General
- Power supply type: External
- Power supply: 12VDC 1.5AMP
- Redundant PSU: No
- Operating temperature: 0°C to +45°C
- Storage temperature: 0°C to +60°C
- Dimensions: 236mm x 145mm x 34mm
- Weight: 0.88kg
|
|
Developed specifically for the commercial AV distribution market and the only Foxtel approved modulator on the market. Encodes HDMI signal to any DTV channel, providing an easy way to distribute AV signals throughout buildings. |
|
L2046 |
|
- Frequency Range 44-470 MHz & 470-860 MHz
- 16dB Maximum Gain
- Single Input
- Two Outputs
- F to Belling Lee (PAL) Adapters Included
- High Output Figure of 100dB IMR3 (DIN45004B)
- <4dB Noise Figure
- Connectors: F-Type
- Mains Powered 230-240V AC
|
|
These amplifiers are ideal for use at home where you want to operate more than one TV. Installation is simple. Run a single cable from each outlet back to the amplifier. Boosts antenna signal by approximately 10-12dB which ensures a strong signal for impr |
|
A1130 |
|
- Quad Input High Definition DVB-T Modulator that converts HD video and audio signals to digital COFDM DVB-T Channel
- Dual Mode - MPEG-2 & AVC (MPEG-4) Encoding
- Distributes 576i / 720P / 1080i / 1080P picture quality (1080P only available on AVC)
- HDMI, Component, CVBS & Analogue Audio Inputs
- Programmable; Channel, Network Names and LCN
- Full function front LCD display for adjustments
- Remote Access and control GUI via Web browser
- Emergency Announcement System control (EAS) input
- Internal FAN Cooling System for Long Life Span
- 2K/8K Carriers
- Adjustable VHF / UHF Output (6-69)
- 20 dB Adjustable Attenuation (98dB launch)
- 1RU Rack Mountable
- Distributes on any new or existing RF cable
- Most Affordable Price Point for HD distribution
- Installed within minutes – plug n play technology
|
|
Quad input high definition DVB-T modulator that converts HD video and audio signals to digital COFDM DVB-T channel. HD-4002DM |
|
L1410C |
|
- Outputs: 2 Way
- Freq. Range: 5 - 2400MHz
- Insertion Loss: 5.5 - 6.8dB
- Isolation: 17 - 13dB
- Return: 4 - 8dB
|
|
Housed in a zinc diecast enclosure to prevent external interference. Suits frequencies from 5 to 2400MHz for use with digital TV, cable and satellite TV. All models include power pass feature from input to all outputs to allow powering of a masthead amp. F type connection.
|
|
L1036 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Includes weather resistant car accessory socket and back to back F antenna
connector. Ideal for caravans and RV's. |
|
L2051 |
|
- Frequency Range 44-470 MHz & 470-860 MHz
- 16dB Maximum Gain
- 8dB VHF Gain Control
- Single Input
- Four Outputs
- F to Belling Lee (PAL) Adapters Included
- High Output Figure of 100dB IMR3 (DIN45004B)
- <4dB Noise Figure
- Connectors: F-Type
- Mains Powered 230-240V AC
|
|
These amplifiers are ideal for use at home where you want to operate more than one TV. Installation is simple. Run a single cable from each outlet back to the amplifier. Boosts antenna signal by approximately 10-12dB which ensures a strong signal for im |
|
L2024A |
|
- All TV antennas are not able to reliably pick up a signal under a metal (tin) roof. Hence this antenna is only suitable for dwellings with tiled roofs etc. External antennas are required for metal (tin) roof dwellings.
|
|
Indoor diople TV antenna with heavy duty base.
1m 75Ω coaxial lead with moulded PAL connector.
The two antennae can be independently rotated allowing the rabbit ears to be set for the clearest reception you can get. |
|
A1056 |
|
- Sleek unobtrusive Flat IR Target for use with Vcomm’s RF IR Video Distribution System with IR modulator / video hub emitters.
- Flexible flat cord allows for ease of placement of target.
- Target plugs into compact in-line coaxial connector box using 3.5mm mini-jack
- Light-weight Connector box has mounting brackets for ease of installation
- To facilitate placement, adhesive backing is also included for both target and connector box.
- Receives IR commands from remote controls and send the signals through the Video Hub and emitters to control the AV device at a remote location
- Built-in LED to show acknowledgement of IR commands
- Rejects interference from displays that enters the IR signal line
- Rejects interference from direct sunlight and fluorescent tube lights for accurate IR signal reception
- Powered remotely by modulator (both connector box & target)
|
|
The resi-linx™ RL-RF210 is a sleek and unobtrusive "Plasma Friendly" Flat IR Target for use in the resi-linx™ range of RF IR Video Distribution system. The target receives IR commands from remote controls and sends the signal through the Video Hub and Emitters to control the AV device at a remote location. |
|
L2034
|
|
|
|
For mounting to roof valley. Galvanised steel construction. 1.4m pole height. 30mm diameter pole. |
|
L1424C |
|
- 8 Way F Type Splitter
- Foxtel Approved
- 5-2400 MHz
- Power Pass All Ports
|
|
Housed in a zinc diecast enclosure to prevent external interference from unwanted signals. Unlike cheaper splitters, these are wideband and will accept frequencies up to 2400MHz making them suitable for use with Digital TV, Cable and Satellite TV frequencies. Fitted with industry standard F connectors for easy installations. |
|
L1303B |
|
|
|
Simply connects in line to provide two outlets. ie. TV and FM radio from one TV antenna. |
|
LX2081A NEW
|
|
- Frequency Range 174~694 MHz (Channels 6 to 51)
- 44dB Maximum Gain
- 10dB Mid-Stage Gain Control
- Single RF Input
- Local or Remote Powering Options
- F-Type Connector for Power Input
- Adjustable Slope Control of 0dB to 10dB
- -30dB Test Point
- Ability to send power out via the RF Input
- High Output Figure: 118dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 300mA
- Operating Voltage: 18V DC
- Operating Temperature: -10ºC to 50ºC
|
|
Kingrays DA44 distribution amplifier has been designed to suit the digital television environment of today and well into the future. |
|
A1119 |
|
|
|
Rack Mounting Kit to suit A 1120 to A 1124.
|
|
L1420C |
|
- Outputs: 4 Way
- Freq. Range: 5 - 2400MHz
- Insertion Loss: 9 - 12.5dB
- Isolation: 13 - 12dB
- Return: 4 - 7dB
|
|
Housed in a zinc diecast enclosure to prevent external interference. Suits frequencies from 5 to 2400MHz for use with digital TV, cable and satellite TV. All models include power pass feature from input to all outputs to allow powering of a masthead amp. F type connection. This splitter is also Foxtel approved.
|
|
L1038 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Fitted with back to back F type connector for easy termination. Includes two facia covers to suit your decor. |
|
A1063A |
|
|
|
Required when connecting TV sets directly to the splitter module output without the use of the A 1055 IR target. |
|
L1040 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Fitted with back to back F type connector for easy termination. Includes two facia covers to suit your decor. |
|
L1730A |
|
|
|
Used for terminating any unused outlets of splitters, line drop taps or tee units to maintain a balanced 75 ohm system. |
|
L1415C |
|
- Outputs: 3 Way
- Freq. Range: 5 - 2400MHz
- Insertion Loss: 10 - 11.5dB
- Isolation: 16 - 13dB
- Return: 3 - 8dB
|
|
Housed in a zinc diecast enclosure to prevent external interference from unwanted signals. Unlike cheaper splitters, these are wideband and will accept frequencies up to 2400MHz making them suitable for use with Digital TV, Cable and Satellite TV frequency |
|
L2315B |
|
- Suitable for both standard and retrofit application
- Wraps around existing pipes
- Suitable for repairs
- Polymer is Ozone and UV resistant
- Penetration size: 5-55mm
- Aluminium base that can be formed to suit your roof profile.
- Unique rubber boot design that provides contact with flashing pipe to create a perfect watertight seal.
- Rubber Dektite designed to withstand high temperatures of up to 115°C.
|
|
Weatherproof rubber flashing to allow penetration of metal roofing from 5-55mm without water ingress. Black colour. |
|
L2015A
|
|
- Precise antenna specifications within the desired UHF frequency band
- Boomlock™ manufacturing technology used to secure elements
- New mounting clamp for easier and safer installation
- Ultrasonically sealed balun housing for maximum reliability
- PCB balun for true matching and lowest insertion loss
- 4G filter included
- Strong and lightweight aluminium construction
- Designed and manufactured in Australia
|
|
The Hills Antenna Tru-Max 18 4G antenna is a superior phased array antenna used for regional UHF areas. |
|
L2012A
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |