|
Description |
Downloads |
Specs |
Ordering |
|
![Q3004 12V Vehicle Battery and Alternator Tester](https://images.altronics.com.au/thb/q/Q3004.jpg) |
Q3004 |
|
|
|
Provides a quick and easy way to test alternator/charging system function in 12V vehicles. |
![Q3000A 6-24V DC Automotive Voltage Probe with Curly Cord](https://images.altronics.com.au/thb/q/Q3000A.jpg) |
Q3000A |
|
- Ideal for troubleshooting DC wiring faults in cars, trucks, boats, caravans etc.
- Features a 250mm curly cord with crocodile earth clip
- 6-24V DC range is ideal for a variety of applications
- Instant visual indication
|
|
This voltage test probe is a handy tool for troubleshooting wiring faults in any 6-24V DC vehicle. |
![Q3001A 6-24V DC Automotive Voltage Tester Sheath Piercing Probe](https://images.altronics.com.au/thb/q/Q3001A.jpg) |
Q3001A |
|
- Ideal for troubleshooting wiring faults in vehicles and other looms.
- Features a grounding clip
- 6-24V DC range is ideal for a variety of applications
|
|
This voltage continuity probe is a handy tool for troubleshooting wiring faults in vehicles and other looms. |
![T2266 50kg Handheld Luggage Scales](https://images.altronics.com.au/thb/t/T2266.jpg) |
T2266 NEW
|
|
|
|
Ideal for avoiding any nasty surprises at the airport before your next holiday. |
![Q3002A Non Contact AC Test Probe & LED Torch](https://images.altronics.com.au/thb/q/Q3002A.jpg) |
Q3002A |
|
- Non-contact detection of AC voltages from 12-1000V AC
- For use on 50/60Hz circuits
- LED indicator and buzzer
- Flashlight for working in dark areas
- UV LED light for leak detection purposes.
- Manually turn On/Off with LED indication
- Auto power off
- Low battery indication
- Live wire indication with red LED light buzzer
- CAT III 1000V rated
|
|
This handy AC non contact tester is a great addition to any toolbox. It detects live AC voltages from 100V to 600V (50-60Hz). Easy operation allows detection of live wires without contact. |
![P8142 Earth Leakage Detection Tester](https://images.altronics.com.au/thb/p/P8142.jpg) |
P8142 |
|
- Designed to test 240V mains sockets
- Simulates earth leakage condition
- Tests protection offered by ELCB and RCD on a circuit
- ELCB/RCD trip testing @ 30mA
- Detects raised earth voltages to about 50V AC.
- LED’s provide instant feedback
- Suitable for electricians
|
|
This device is designed to test a 240V mains power point for correct operation, plus simulate an earth leakage condition to test the Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) protecting that power point. |
![Q3003 Non Contact IP67 AC Test Probe & LED Torch](https://images.altronics.com.au/thb/q/Q3003.jpg) |
Q3003 |
|
- Detection Voltage Range: 100V AC to 1000V AC, 12V to 1000V AC
- Frequency Range: 50/60Hz
- Batteries: Two "AAA" 1.5V batteries
- Operating Temperature: 0°C to 50°C (32°F to 122°F)
- Storage Temperature: -10°C to 60°C (14°F to 140°F)
- Humidity: 80% max
- Altitude: 2000 meters
- Pollution Degree: 2
- Safety Compliance: CAT IV-1000V
- Motor Shaking
|
|
A trade quality waterproof non contact detector designed for AC detection. It detects live AC voltages from 100V to 1000V (50-60Hz), plus a low voltage range for 12V to 100V AC. Easy operation allows detection of live wires without contact. Whenever AC is detected at a power point, sheathed or bare ended cable, the tester will light up red. |
![X6015 Bluetooth OBDII Scanner Dongle](https://images.altronics.com.au/thb/x/X6015.jpg) |
X6015 |
|
- Works with most vehicles newer than 2005
- iOS, Android & Windows compatible
- Compatible with a wide selection of apps
- Displays engine dashboard parameters, error codes and real time data
- Plug and play operation
|
|
If your vehicle is fitted with an OBDII port, this dongle can be plugged in and connected via Bluetooth to a smartphone to provide a wealth of diagnostic information. |
![T2261 600g Digital Pocket Scales](https://images.altronics.com.au/thb/t/T2261.jpg) |
T2261 |
|
- Zero/Tare function
- 4 unit counting modes
- 600 gram load capacity
- 0.01g resolution
- Measures in grams, avoirdupois ounces, troy ounces & pennyweight
- Auto power off
- Includes pleather pouch & hard plastic protective cover
|
|
These compact scales provide a quick and easy way of accurately weighing anything up to 600gm. Sized at just 120mm long, the unit fits right in your pocket. Housed in a protective plastic cover. |
![Q1150B Digital LC Meter](https://images.altronics.com.au/thb/q/Q1150B.jpg) |
Q1150B |
|
- High accuracy inductance & capacitance ranges
- Jumbo 1999 count readout
- Battery included
- Supplied with quality silicon rubber test leads, rubber holster.
|
|
This dedicated LC meter offers wider inductance and capacitance ranges than other "do-it-all" meters available on the market. |
![Q3215 Lead Acid 12V Battery Tester](https://images.altronics.com.au/thb/q/Q3215.jpg) |
Q3215 |
|
- Reverse polarity protection
- Capacity selection 5Ah-80Ah
- Voltage display
- Three status LEDs
- One-touch load testing
- Powered by battery being tested
|
|
Provides a quick and easy verification of battery condition for 12 Volt sealed lead acid (SLA), wet cells, gel cell and AGM batteries. Once the croc clip test leads are connected, battery capacity can be selected (between 5Ah and 80Ah) and a 20A te |
![X6017 OBDII Scanner Diagnostic Tool](https://images.altronics.com.au/thb/x/X6017.jpg) |
X6017 NEW
|
|
- Reads trouble codes on most vehicles
- Displays general and vehicle specific codes
- View vehicle information
- View real-time data streams
- An essential automotive diagnostic tool
|
|
Used to check engines of all vehicles that comply with OBD II, 12V voltage with standardized 16-Pin connector. This OBDII scanner tool provides a complete solution for reading vehicle data on OBDII equipped vehicles. |
![Q2118 12V 100-2000CCA Digital Battery Analyser](https://images.altronics.com.au/thb/q/Q2118.jpg) |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
![Q2014 Handheld 1KHz Audio Signal Generator](https://images.altronics.com.au/thb/q/Q2014.jpg) |
Q2014 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
|
|
Compact and portable, this handheld battery powered 1KHz tone generator has been designed to test PA systems and in particular hearing loop induction sound systems. The unit produces a 1KHz tone which is fed into the input of the amplifier under test. Two output levels are provided, 100mV and 1V. Includes 9V battery. Size: 79W x 117H x 24Dmm. |
![Q2100 Semiconductor Component Analyser](https://images.altronics.com.au/thb/q/Q2100.jpg) |
Q2100 |
|
- Connect any way round.
- Automatic component type identification.
- Automatic pinout identification.
- Transistor gain measurement.
- MOSFET gate threshold measurement.
- PN junction characteristics measurements.
- Leakage current measurement.
- Auto power on and power off.
- Ultra-slim and compact design.
|
|
An amazingly versatile piece of test equipment that could save you hours in looking up transistor, diode and FET specifications!
Once you've used the Atlas Component Analyser, you'll wonder how you ever did without it. |
![Q2120 Digital Battery Analyser](https://images.altronics.com.au/thb/q/Q2120.jpg) |
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
![Q0967 800W PV Solar Panel Tester](https://images.altronics.com.au/thb/q/Q0967.jpg) |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
![Q2105 ESR PLUS Capacitor Analyser](https://images.altronics.com.au/thb/q/Q2105.jpg) |
Q2105 |
|
- Measure ESR (even in-circuit).
- Measure capacitance (from 0.3μF to 90,000μF).
- Automatically starts analysis when the ESR70 is connected.
- Audible alerts with different tones for various ESR levels.
- ESR resolution down to 0.01Ω.
- Polarity free due to bi-directional low voltage (500mV) test span.
- Low DC resistance checking measurement (even in-circuit).
- Supplied complete with 2mm male test leads and 2mm compatible gold plated crocs.
- Test leads are ultra-durable and 45cm (18") long with 2mm plugs.
- Enhanced software compensation of cable resistance.
- Enhanced compensation for leakage or parallel resistance.
- Improved LCD with better backlight.
- 10x faster capacitance measurement for large capacitors.
- Enhanced user options system.
- New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements.
- Much wider capacitance measurement range now 0.3μF to 90,000μF (was 1μF to 22,000μF).
|
|
Measuring a capacitor's ESR (equivalent series resistance) is a great indicator of capacitor condition. The Atlas ESR offers instant results. Just connect the probes and press test - no need to worry about polarity! You can even use the Atlas ESR in circu |
![Q2112 LCR Impedance Component Analyser](https://images.altronics.com.au/thb/q/Q2112.jpg) |
Q2112 |
|
- Resistance: 1Ω-2MΩ (±0.1Ω/1%)
- Capacitance: 0pF-10,000µF ( ±0.1pF/1.5%)
- Inductance: 0µH-10H ( ±0.1µH/1.5%)
- Peak test voltage (OC): -1.05V / +1.05V
- Peak test current (Silicon Chip Magazine): - 3.25mA / +3.25mA
- Test frequency accuracy: ±1%
- Sine purity: Typically -60dB 3rd harmonic
- Dimensions: 100 x 70 x 20mm
|
|
The Atlas LCR analyser is an advanced tester which greatly simplifies the testing of passive components. Simply connect the hook probes to the component legs and press test. In seconds the Atlas LCR will identify the type of component (inductor, cap |
![Q2007 Digital Audio Impedance Meter](https://images.altronics.com.au/thb/q/Q2007.jpg) |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
![Q2115 USB Graphical Semiconductor Component Analyser](https://images.altronics.com.au/thb/q/Q2115.jpg) |
Q2115 |
|
- The DCA Pro is an advanced new design that includes a graphics display, USB port, PC Software and an enhanced component recognition library.Transistors (including Darlingtons and "digital" transistors), Silicon and Germanium types. Measures gain, VBE and leakage.
- MOSFETs, enhancement mode and depletion mode types. Measure on-threshold (at 5mA) and approx transconductance (for span of 3mA-5mA).
- JFETs, including normally off SiC types. Measures pinch-off voltage (at 1uA) and approx transconductance (for span of 3mA-5mA).
- IGBTs (insulated gate bipolar transistors). Measures on-threshold (at 5mA).
- Diodes and Diode networks.
- LEDs and bicolour LEDs (2 lead and 3 lead types).
- Zener Diodes with measurement of zener voltage up to 9V at 5mA.
- Voltage regulators (measures regulation voltage <8V, drop-out voltage, quiescent current). Note that some regulators are not stable without their decoupling caps and/or minimum load and cannot be tested by the DCA75.
- Triacs and Thyristors that require less than 10mA of gate current and holding current.
|
|
Our all new Peak Advanced Semiconductor Analyser will
Automatically identify part type (eg, Transistor, JFET, IGBT, Regulator, Zener, Diodes, etc). Automatically identify pinout (connect any way round).
|
![Q2012 Field Strength Meter](https://images.altronics.com.au/thb/q/Q2012.jpg) |
Q2012 |
|
- Detects field strength in hearing loop systems.
- Can be used in conjunction with Q 2014 tone generator for reliable hearing loop installation.
- Headphone output.
- Internal lithium battery for easy recharging.
- Engineered and manufactured in Australia.
|
|
Essential for all installers setting up and commissioning hearing
induction loop amplifier systems. It is ideally used in conjunction with the Redback® Q 2014 1kHz tone generator allowing
an installer to test the signal generated in the actual ‘loop’ of the system. |