|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q0203B NEW
|
|
- 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronising Signal + External Trigger
- Easy to use button layout
- Large and clear 7” true colour 24-bit display
- Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth
- Huge selection of auto measurement functions
- Powerful trigger functions: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC
- Integrated USB host, support USB disk storage, USB interface system update
|
|
Perfect for those in R&D, product development or service of complex electronic equipment. This compact bench top oscilloscope features 2 channels with real-time sampling modes of 1GSa/s (25GS/s equivalent sampling rate). |
 |
Q0176 |
|
- 10 x Position
- Attenuation Ratio: 10:1
- Bandwidth: DC - 100MHz
- Rise Time: 5.8ns
- Input Resistance: 10M Ohm when used with Oscilloscopes with 1M Ohm input
- Input Capacitance: Approx. 15pF
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- 1 x Position
- Attenuation Ratio: 1:1
- Bandwidth: DC - 15MHz
- Rise Time: 23.3ns
- Input Resistance: 1M Ohm (oscilliscope input)
- Input Capacitance: Approx. 46pF plus oscilliscope capacitance
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- Safety: IEC - 1010 CAT II
- Cable Length: 1.2 Metres
|
|
These high quality general purpose oscilloscope probes have x1 and x10 input attenuator and 600V maximum input voltage. 1.5m lead length. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
 |
Q3004 |
|
|
|
Provides a quick and easy way to test alternator/charging system function in 12V vehicles. |
 |
Q1121B |
|
- Large display with backlight
- Low battery indicator
- Data hold function
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- 1x 9V Battery included
- Cat II
|
|
Amazing multimeter for the price! This 3.5 digit multimeter features 19 ranges, an in-built hFE transistor and diode test function. |
 |
Q1053B |
|
- Low battery indicator
- Jumbo display
- Continuity buzzer
- Square wave output
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- Battery included
- Cat II 500V
|
|
This compact, affordable digital multimeter features 19 ranges, square wave output, continuity buzzer, in-built hFE transistor and diode test function. |
 |
Q1070A |
|
- True RMS AC measurement
- 6000 count 3.75 digit LCD
- Non contact AC voltage detection
- Temperature measurement.
- Frequency counter to 60MHz
- Capacitance measurement
- Fused 10A input
- Continuity and diode test
- Auto power off
- Low battery indicator
- 2x AAA battery included
- Data hold mode
- Display backlight
- In built torch
- Cat III 600V
|
|
An affordable true RMS digital multimeter, with in built torch for the enthusiast or instrument technician. |
 |
Q1067 |
|
- On-screen test lead connection prompts
- Capacitance measurement
- Frequency counter
- Temperature measurement
- Continuity checker
- Resistance to 20M ohm
- Diode check
- Continuity buzzer
- Transistor checker
- Auto power off after 30 minutes
- Massive 20A DC current range
- Rubber holster included
- Battery included
|
|
This digital multimeter features an extra large display making it very easy to read. It has a multitude of useful features including transistor tester, capacitor, frequency and temperature ranges. |
 |
Q0102 |
|
- 2 channel digital oscilloscope + digital multimeter
- Easy to use button and screen layout
- Small enough for single hand operation
- Large, clear 2.8” 64K colour screen 320x240 resolution
- Oscilloscope: 250MSa/s Sample Rate, 40MHz Bandwidth
- USB C recharging with internal 2600mAh lithium battery
- Automatic frequency & amplitude measurement
- 4000 count 10A multimeter
|
|
The ultimate field testing accessory combining an digital storage oscilloscope and digital multimeter. It features 2 channels with real time sampling modes of 125MSa/s per channel (or 250MSa/s when used in single channel mode). 64K colour screen provides a clear view. |
 |
T2266 NEW
|
|
|
|
Ideal for avoiding any nasty surprises at the airport before your next holiday. |
 |
Q3000A |
|
- Ideal for troubleshooting DC wiring faults in cars, trucks, boats, caravans etc.
- Features a 250mm curly cord with crocodile earth clip
- 6-24V DC range is ideal for a variety of applications
- Instant visual indication
|
|
This voltage test probe is a handy tool for troubleshooting wiring faults in any 6-24V DC vehicle. |
 |
Q3001A |
|
- Ideal for troubleshooting wiring faults in vehicles and other looms.
- Features a grounding clip
- 6-24V DC range is ideal for a variety of applications
|
|
This voltage continuity probe is a handy tool for troubleshooting wiring faults in vehicles and other looms. |
 |
T2261 |
|
- Zero/Tare function
- 4 unit counting modes
- 600 gram load capacity
- 0.01g resolution
- Measures in grams, avoirdupois ounces, troy ounces & pennyweight
- Auto power off
- Includes pleather pouch & hard plastic protective cover
|
|
These compact scales provide a quick and easy way of accurately weighing anything up to 600gm. Sized at just 120mm long, the unit fits right in your pocket. Housed in a protective plastic cover. |
|
Q0174 |
|
- 10 x Position
- Attenuation Ratio: 10:1
- Bandwidth: DC - 60MHz
- Rise Time: 5.8ns
- Input Resistance: 10M Ohm when used with Oscilloscopes with 1M Ohm input
- Input Capacitance: Approx. 15pF
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- 1 x Position
- Attenuation Ratio: 1:1
- Bandwidth: DC - 15MHz
- Rise Time: 23.3ns
- Input Resistance: 1M Ohm (oscilliscope input)
- Input Capacitance: Approx. 46pF plus oscilliscope capacitance
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- Safety: IEC - 1010 CAT II
- Cable Length: 1.2 Metres
|
|
These high quality general purpose oscilloscope probes have x1 and x10 input attenuator and 600V maximum input voltage.
1.5m lead length. |
 |
Q1242A |
|
- 200MΩ and 2000MΩ ranges
- Backlit LCD readout
- “Push to test” activation
- Auto power off
- Rubber holster
- Data hold
- High quality PVC leads
- Alligator clip lead adaptors
- Battery included
- Cat II 600V
|
|
Digital insulation testers measure the electrical insulation strength between two conductors by applying a high voltage across them and measuring any current that flows. This is to test for "leakage" paths and insulation breakdown in electrical circuits. |
 |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
P1024A NEW
|
|
|
|
Handy test leads. Pack of 10. Contains: two of each yellow, red, white, black and blue |
 |
P1024 |
|
|
|
Handy test leads. Pack of 6.
Contains: one of each; green, yellow, red, white, black and blue
Length: 210mm |
 |
Q1026A |
|
- Battery test range
- Continuity tester
- 10A DC current range
- Integral stand
- Fuse and diode protection
- Moving coil to measure extremely cyclic voltages
- Mirrored scale to minimise parallax error
- Resistance range zero adjustment
- Transistor hFE & LED tester
|
|
This quality analogue multimeter is ideal for observing constantly varying quantities such as cycling voltages or speaker resonance testing. It has 20kΩ/Volt sensitivity with a colour scale and mirrored arc for parallax error reduction. |
 |
Q1026B |
|
- Battery test range
- Continuity tester
- 10A DC current range
- Requires 9V battery
- Integral stand
- Fuse and diode protection
- Moving coil to measure extremely cyclic voltages
- Mirrored scale to minimise parallax error
- Resistance range zero adjustment
- Transistor hFE & LED tester
- CAT II 1000V / CAT III 500V
|
|
This quality analog multimeter is ideal for observing constantly varying quantities such as cycling voltages or speaker resonance testing. It has 20kΩ/Volt sensitivity with a colour scale and mirrored arc for parallax error reduction. |
 |
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
 |
Q1129 |
|
- Easy auto ranging design
- Data hold function
- Jumbo LCD with white backlight
- Continuity buzzer
- Diode test
- 10A DC current range
- Includes 2xAAA batteries
- Fuses are replaceable (10A 250V, 400mA 250V SFE-6)
- Frequency and duty cycle
- Cat II 1000V / Cat III 600V
|
|
This affordable 4000 count digital multimeter with 12 test modes is the perfect accessory for the enthusiast or student. Auto ranging makes testing easier, whilst the large LCD screen with white backlighting makes it easy to read from a distance. |
 |
Q1133B NEW
|
|
- Streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti-interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- CMOS, TTL logic test; True RMS, NCV, MAX/MIN tests
- Relative value measurement, frequency/ duty cycle test, data hold
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
