|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q0203B NEW
|
|
- 2 Channel Digital Oscilloscope + Arbitrary/Function Waveform Generator + Synchronising Signal + External Trigger
- Easy to use button layout
- Large and clear 7” true colour 24-bit display
- Oscilloscope: 1GSa/s Sample Rate, 100MHz Bandwidth
- Huge selection of auto measurement functions
- Powerful trigger functions: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- Arbitrary/Function Waveform Generator: 25MHz, 12 bits resolution, 200MHz DDS, Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC
- Integrated USB host, support USB disk storage, USB interface system update
|
|
Perfect for those in R&D, product development or service of complex electronic equipment. This compact bench top oscilloscope features 2 channels with real-time sampling modes of 1GSa/s (25GS/s equivalent sampling rate). |
 |
Q1346 |
|
- POE test
- PING test
- Perform crosstalk test on network cable
- Test open, short or cross connection
- Measure length of telephone, network cabling up to 2000m
- Log data and measurements to internal Micro SD card
- Locate breakages
- Voltage detector in receiver end (50-1000V)
- Includes 8 remote units
- Voltage presence detection
- Includes carry case, charging lead and adaptors.
|
|
This comprehensive cable testing kit consists of three units. The main tester with 2.8" LCD screen, cable "sniffer" receiving unit and 8 remote identifiers. It is capable of measuring cable length, tracing cable location, continuity testing, PoE and Ping testing. It can be used with LAN, telephone cabling. |
 |
Q2012 |
|
- Detects field strength in hearing loop systems.
- Can be used in conjunction with Q 2014 tone generator for reliable hearing loop installation.
- Headphone output.
- Internal lithium battery for easy recharging.
- Engineered and manufactured in Australia.
|
|
Essential for all installers setting up and commissioning hearing
induction loop amplifier systems. It is ideally used in conjunction with the Redback® Q 2014 1kHz tone generator allowing
an installer to test the signal generated in the actual ‘loop’ of the system. |
 |
Q0102 |
|
- 2 channel digital oscilloscope + digital multimeter
- Easy to use button and screen layout
- Small enough for single hand operation
- Large, clear 2.8” 64K colour screen 320x240 resolution
- Oscilloscope: 250MSa/s Sample Rate, 40MHz Bandwidth
- USB C recharging with internal 2600mAh lithium battery
- Automatic frequency & amplitude measurement
- 4000 count 10A multimeter
|
|
The ultimate field testing accessory combining an digital storage oscilloscope and digital multimeter. It features 2 channels with real time sampling modes of 125MSa/s per channel (or 250MSa/s when used in single channel mode). 64K colour screen provides a clear view. |
 |
Q2115 |
|
- The DCA Pro is an advanced new design that includes a graphics display, USB port, PC Software and an enhanced component recognition library.Transistors (including Darlingtons and "digital" transistors), Silicon and Germanium types. Measures gain, VBE and leakage.
- MOSFETs, enhancement mode and depletion mode types. Measure on-threshold (at 5mA) and approx transconductance (for span of 3mA-5mA).
- JFETs, including normally off SiC types. Measures pinch-off voltage (at 1uA) and approx transconductance (for span of 3mA-5mA).
- IGBTs (insulated gate bipolar transistors). Measures on-threshold (at 5mA).
- Diodes and Diode networks.
- LEDs and bicolour LEDs (2 lead and 3 lead types).
- Zener Diodes with measurement of zener voltage up to 9V at 5mA.
- Voltage regulators (measures regulation voltage <8V, drop-out voltage, quiescent current). Note that some regulators are not stable without their decoupling caps and/or minimum load and cannot be tested by the DCA75.
- Triacs and Thyristors that require less than 10mA of gate current and holding current.
|
|
Our all new Peak Advanced Semiconductor Analyser will
Automatically identify part type (eg, Transistor, JFET, IGBT, Regulator, Zener, Diodes, etc). Automatically identify pinout (connect any way round).
|
 |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
Q2112 |
|
- Resistance: 1Ω-2MΩ (±0.1Ω/1%)
- Capacitance: 0pF-10,000µF ( ±0.1pF/1.5%)
- Inductance: 0µH-10H ( ±0.1µH/1.5%)
- Peak test voltage (OC): -1.05V / +1.05V
- Peak test current (Silicon Chip Magazine): - 3.25mA / +3.25mA
- Test frequency accuracy: ±1%
- Sine purity: Typically -60dB 3rd harmonic
- Dimensions: 100 x 70 x 20mm
|
|
The Atlas LCR analyser is an advanced tester which greatly simplifies the testing of passive components. Simply connect the hook probes to the component legs and press test. In seconds the Atlas LCR will identify the type of component (inductor, cap |
 |
Q1340A |
|
- Transmitter
- Tone frequency: 130KHz
- Max. distance of transmission: 3km
- Max. distance of cable map: 300m
- Max. working current: ≦70mA
- Tone mode: Single tone
- Compatible connectors: For RJ45(8 pin)/RJ11(6 pin) cable map test. RJ45 SCAN socket : for RJ45 locating individual wire pairs RJ11 SCAN socket: for RJ11 locating individual wire pairs
- Cable types: RJ45 Lan cable Cat 5, 5e, 6(UTP/ STP), RJ11/12 telephone cable Cat 3 (6P/2C/4C/6C)
- Function selection: 5 Press button switch (POWER、SCAN/PoE. SCAN,TEST/FAST TEST、Ω,POL/TEL)
- Continuity test: 1 LED (≦300Ω), Coaxial cable & normal solid/Stranded wire by alligator clips patch cord.
- Max. signal voltage: 8Vp-p
- Cable map indication: 8 LEDs, Fast/Slow dual speed
- Shielded indication: 1 LED
- Telephone line polarity, status indication: 1 Dual color LED
- Live telecommunication equipment test and router test: Yes
- Voltage protection: DC 48V
- Auto power off: 1 hour
- Low battery display: 6.5V (Power LED flashes)
- Battery type DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pce)
- Dimension: 138L×80W×35D mm
- Weight: 140g
- Receiver
- Frequency: 130KHz
- The Max. working current: ≦115mA
- Compatible connectors: RJ45(8 pin)/RJ11(6 pin)
- Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
- Earphone jack: 1
- Signal status indication: 1 dual colour LED & Buzzer
- Cable map indication: 8 LEDs
- Shielded indication: 1 LED
- NCV indication; 1 LED (AC90~1000V，≥50mm，≤100mm)
- LED illumination: 1 LED
- Power indication: 1 LED
- Battery type: DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pcs)
- Dimension: 203L×50W×32D mm
- Weight: 95g
- Accessories: RJ45 cable patch cords, RJ11 cable patch cords, RJ11 to alligator clips patch cord,
- earphone, storage bag, user manual
|
|
This Noise-Filtering Network PoE Toner & Probe
allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
 |
Q1340B NEW
|
|
- Single way to test plug crimping quality
- Wire tracing & cable mapping at the same time
- Easily locate the port with a flashing signal
- PoE switches & STP wire tracing up to 3KM
- Telephone line status/polarity indication
- Cable mapping & status indication up to 300M for continuity, shorts, opens and crossover
- Fast/slow scan function
- Display cable status and troubleshoot wiring
- Non- contact voltage detecting
|
|
This Noise-Filtering Network PoE Toner & Probe allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
 |
X7063 |
|
- Perpetual Calendar up to Year 2099
- Automatic calibration of network time service
- Day of week available to be selected in 8 languages
- Able to be used as an alarm with two daily alarms optional
- Automatic snooze function (OFF or 5~60min)
- Records temperature, humidity, wind speed and rainfall
- Display of ‘feels like temperature’, wind chill temperature, heat index, dew point temperature
- Future weather forecast and forecast temperature function
- Connects directly to Wi-Fi network (2.4Ghz only).
- Adjustable backlight (3 Levels) - when station is plugged in through USB output
|
|
This fantastic wireless Wi-Fi home weather station contains everything you require to monitor live weather conditions at home. The main base station displays at a glance, indoor and outdoor temperature, humidity, barometric pressure, recent rainfall, wind speed and direction. |
 |
Q2105 |
|
- Measure ESR (even in-circuit).
- Measure capacitance (from 0.3μF to 90,000μF).
- Automatically starts analysis when the ESR70 is connected.
- Audible alerts with different tones for various ESR levels.
- ESR resolution down to 0.01Ω.
- Polarity free due to bi-directional low voltage (500mV) test span.
- Low DC resistance checking measurement (even in-circuit).
- Supplied complete with 2mm male test leads and 2mm compatible gold plated crocs.
- Test leads are ultra-durable and 45cm (18") long with 2mm plugs.
- Enhanced software compensation of cable resistance.
- Enhanced compensation for leakage or parallel resistance.
- Improved LCD with better backlight.
- 10x faster capacitance measurement for large capacitors.
- Enhanced user options system.
- New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements.
- Much wider capacitance measurement range now 0.3μF to 90,000μF (was 1μF to 22,000μF).
|
|
Measuring a capacitor's ESR (equivalent series resistance) is a great indicator of capacitor condition. The Atlas ESR offers instant results. Just connect the probes and press test - no need to worry about polarity! You can even use the Atlas ESR in circu |
 |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
 |
Q1347A |
|
- Test open, short or cross connection
- Measure length of telephone, network cabling up to 1000m
- Detect length with or without remote units connected
- 3% accuracy (±0.5m)
- Locate breakages
- Includes 8 remote units
- Includes carry case, 2 x 9V batteries, earphones, charging lead and adaptors
|
|
This comprehensive cable testing kit consists of three units. The main tester with 4 x 16 character screen, cable ‘sniffer’ receiving unit and 8 remote identifiers. |
 |
Q1264A
|
|
- Ranges: Lo: 30 - 80dB
- Hi: 80 - 130dB
- Resolution: ±0.1dB
- Freq. range: 31.5Hz - 8000Hz
- Dynamic range: 50dB
- Freq. weighting: A & C
- Accuracy: ±1.4dB
- Microphone: Electret condenser
- Dimensions: 252H x 66W x 33D mm
|
|
A must for the serious audio installer or enthusiast. This quality sound pressure level meter gives a digital readout of the ambient noise level at its microphone. Features two ranges: Low (30 to 80dB) and High (80 to 130dB), with two built-in weighting curves. A and C weighting. Response can be switched between slow (1s) or fast (125ms). Features |
 |
Q2100 |
|
- Connect any way round.
- Automatic component type identification.
- Automatic pinout identification.
- Transistor gain measurement.
- MOSFET gate threshold measurement.
- PN junction characteristics measurements.
- Leakage current measurement.
- Auto power on and power off.
- Ultra-slim and compact design.
|
|
An amazingly versatile piece of test equipment that could save you hours in looking up transistor, diode and FET specifications!
Once you've used the Atlas Component Analyser, you'll wonder how you ever did without it. |
 |
Q0968 |
|
- Two current ranges 4A, 80A
- 1mA resolution
- Backlit LCD
- One touch zero function
- 23mm jaw opening
- Auto power off
- Data hold function
- Test leads and carry case included
- 2x AAA battery included
- Cat III 600V
|
|
This compact clamp meter provides high resolution current readings up to 80A ac or dc. |
 |
Q2120 |
|
- A must have for vehicle servicing
- Suits lead acid batteries of all types including SLA and deep cycle
- Includes rubber holster
- No battery required
- Quick and accurate measurement of battery health.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. Suitable for use with cars, trucks, busses, boat, forklifts and motorcycles - anywhere a 12 Volt lead acid battery is used. Includes heavy duty wide entry croc clip cables. Very easy to use, simply connect to the battery, turn tester |
 |
Q2014 |
|
-
 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
|
|
Compact and portable, this handheld battery powered 1KHz tone generator has been designed to test PA systems and in particular hearing loop induction sound systems. The unit produces a 1KHz tone which is fed into the input of the amplifier under test. Two output levels are provided, 100mV and 1V. Includes 9V battery. Size: 79W x 117H x 24Dmm. |
 |
Q1344 |
|
- Cable length measurement, accurate to ±3%
- Short circuit, open, split pair detection
- UTP cable conductor verification
- Includes USB charging lead
- Internal lithium ion battery in main unit
- Bright display backlighting
- Auto power off
- Confirms integrity of patch leads and field wiring
- Suits RJ11 and RJ45 cabling
- Adjustable buzzer volume
|
|
This compact handheld cable verifier features a USB rechargeable lithiumion battery for easy recharge on the go. It verifies the length and integrity of coaxial and UTP data/telephone cabling. It's wiremap system detects short circuits, split pairs and cable length up to 350m. |
 |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
 |
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
 |
Q1088 |
|
- True RMS AC measurement
- IP67 splash and dust-proof
- 4000 count LCD
- Autoranging
- MAX/MIN display modes
- Frequency counter to 40MHz
- Capacitance measurement
- Fused 10A input
- Temperature mode (°C/°F)
- Continuity and diode test
- Auto power off
- Low battery indicator
- 9V battery included
- Data hold & run mode
- Display backlight
- Class 2 double insulation
- Cat IV 600V, Cat III 1000V
|
|
Designed for marine, mining, industrial and outdoor environments, the unit is splash proof and fully sealed against dust ingress. |
 |
Q1242A |
|
- 200MΩ and 2000MΩ ranges
- Backlit LCD readout
- “Push to test” activation
- Auto power off
- Rubber holster
- Data hold
- High quality PVC leads
- Alligator clip lead adaptors
- Battery included
- Cat II 600V
|
|
Digital insulation testers measure the electrical insulation strength between two conductors by applying a high voltage across them and measuring any current that flows. This is to test for "leakage" paths and insulation breakdown in electrical circuits. |
 |
Q1341 |
|
- Headphone socket (earphones included)
- Adjustable buzzer volume
- Tests network and phone circuit voltage
- LED light on probe
- Single or dual tone
- Verifies short, open or crossed pairs in UTP cables
- Confirms integrity of patch leads and field wiring
- Includes RJ45 lead & croc clip test lead
|
|
Combines the functionality of a cable tracer and network cable tester in one convenient unit. The main unit can be connected to an unidentified pair which injects an audible signal down the line. |
 |
Q2022A NEW
|
|
- All metal construction
- Portable design runs off 9V battery (sold separately)
- Easy to use cable integrity checker for PA and AV installers
- New model supports Powercon and 3.5mm jacks
|
|
Compatible with 3.5mm jack, 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, 4P Speakon, Powercon, banana plugs, RJ45 and USB. A quick and easy way to confirm lead integrity. |
 |
D3011 |
|
|
|
Allows you to test the conditions of 802.3af/at standard and non-standard PoE cabling and ports on PoE equipment. Tests for power supply voltage, polarity and crossover mode, plus displays power consumption of connected DC devices such as cameras or other PoE enabled IoT products.
|
 |
Q2118 NEW
|
|
- Large easy to read LCD display with backlighting.
- Tests battery CCA, voltage, internal resistance, battery health and charge status.
- Provides "Good Battery", "Good Recharge", "Charge Retest", "Replace", "Bad Cell Replace" condition statuses.
- Supports all battery standards, JIS, DIN, IEC, EN, SAW, CA, CCA, GB, BCI, MCA.
- Short circuit and reverse polarity protection.
- Test history display.
- Tests batteries in-situ in vehicle or out of vehicle.
- Quick test function via AH input.
|
|
Detects and analyses battery voltage, cold cranking amperes (CCA), resistance (mΩ) and battery cell condition. |
 |
Q1068A NEW
|
|
- Auto ranging with manual override
- Min/max & data hold
- Non contact AC voltage detector
- Frequency/duty cycle measurement
- Temperature measurement
- Backlit LCD screen with bargraph
- Diode test
- Continuity buzzer
- 3 x AAA Batteries included
- Auto power off
- Cat II 1000V, Cat III 600V
- 2 year warranty.
|
|
With in-built AC mains detection. This is one of the best digital multimeters we have evaluated when it comes to build quality and feature set. Its perfect for the serious enthusiast or tradesperson. LCD bargraph. 3.75 digit display. Mode assistance indicators. |
 |
D3020 |
|
- Auto-ranging multimeter
- Will test 10Base-T, 10Base-2, RJ45/11, 258A, TIA 568A/568B and Token Ring
- Includes RJ & BNC network lead adaptors
- Auto power off
- Supplied with test probe leads & carry case
- Battery included
- Cat II 1000V & Cat III 600V
|
|
This is the perfect "all-in-one" solution for network installers and IT technicians. |
 |
X6017 NEW
|
|
- Reads trouble codes on most vehicles
- Displays general and vehicle specific codes
- View vehicle information
- View real-time data streams
- An essential automotive diagnostic tool
|
|
Used to check engines of all vehicles that comply with OBD II, 12V voltage with standardized 16-Pin connector. This OBDII scanner tool provides a complete solution for reading vehicle data on OBDII equipped vehicles. |
 |
Q1073A |
|
- True RMS AC measurement
- 6000 count reverse backlit LCD
- Autoranging
- Frequency counter to 10MHz
- Capacitance measurement
- Fused 10A input
- Temperature mode (°C/°F)
- Test socket LED lights
- Continuity and diode test
- Internal rechargeable lithium battery
- Range hold & relative mode
- Data hold
- Wireless USB charging adaptor
- Cat III 1000V/Cat IV 600V
|
|
With wireless charging adaptor - no batteries required! Plus, input jack LED indicators to remind users to plug leads into the correct jacks. |
 |
Q1302 NEW
|
|
|
|
This signal booster for the Q1300 wireless TPMS allows you to increase range by relaying the sensors from your caravan or other trailer back to the internal monitoring unit in the vehicle. Requires 12V DC power. Bare end connection provided. |
 |
Q1090 |
|
- 9999 count reverse backlit readout
- True RMS
- Non contact voltage detection
- Auto ranging with push button operation
- Data hold and relative modes
- Analog bar graph display
- Cat III 600V, Cat II 1000V
- Battery & carry pouch included
|
|
Professional digital multimeter with in-built AC mains detection. Featuring a striking easy to read reverse backlit screen and a massive 9999 count readout. Auto ranging with easy push button operation. Great price and build quality. |
 |
Q1283A |
|
- IR temperature range: -50 to 580°C
- IR resolution: 0.1 deg up to 580°C
- Emissivity: Adjustable 0.1-1.0
- Basic accuracy: ±2% of reading
- Distance-to-spot ratio (optical resolution): 13:1
- Spectral response: 8-14μm
- Dimensions: 155H x 98W x 27Dmm
|
|
This handheld IR thermometer offers laser pointer guide and excellent accuracy between -50°C and 580°C. |
 |
Q0965A |
|
- 800A AC/DC range
- 10mA resolution
- Backlit LCD
- 28mm clamp opening
- Auto power off
- 6000 count LCD readout
- Data hold and relative functions
- Test leads, temperature probe and carry case included
- 2 x AAA battery included
- Cat II 600V, Cat III 300V
|
|
A clamp meter offering the flexibility of measuring AC and DC currents up to 800A. Simply clamp the jaws around the conductor and the display reads the DC or AC current present. It can test DC Volts, AC Volts, DC Amps, AC Amps, resistance, capacitance, frequency, temperature, temperature and continuity. |
 |
Q1067 |
|
- On-screen test lead connection prompts
- Capacitance measurement
- Frequency counter
- Temperature measurement
- Continuity checker
- Resistance to 20M ohm
- Diode check
- Continuity buzzer
- Transistor checker
- Auto power off after 30 minutes
- Massive 20A DC current range
- Rubber holster included
- Battery included
|
|
This digital multimeter features an extra large display making it very easy to read. It has a multitude of useful features including transistor tester, capacitor, frequency and temperature ranges. |
 |
Q1135 |
|
- Large easy read 19999 count screen
- Auto ranging
- True RMS measurement
- Data hold, min/max and relative modes
- Continuity buzzer
- Diode test
- Non contact AC voltage detection
- 2x AA battery included
|
|
This professional digital multimeter offers extended resolution to 4 digits! |
 |
Q1026B |
|
- Battery test range
- Continuity tester
- 10A DC current range
- Requires 9V battery
- Integral stand
- Fuse and diode protection
- Moving coil to measure extremely cyclic voltages
- Mirrored scale to minimise parallax error
- Resistance range zero adjustment
- Transistor hFE & LED tester
- CAT II 1000V / CAT III 500V
|
|
This quality analog multimeter is ideal for observing constantly varying quantities such as cycling voltages or speaker resonance testing. It has 20kΩ/Volt sensitivity with a colour scale and mirrored arc for parallax error reduction. |
 |
Q1089 NEW
|
|
- True RMS Auto Range.
- Large easy to read reverse backlit screen.
- Simple push button operation.
- Large multifunction display.
- Indicates correct connection jacks.
|
|
This compact true RMS digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
 |
Q3215 |
|
- Reverse polarity protection
- Capacity selection 5Ah-80Ah
- Voltage display
- Three status LEDs
- One-touch load testing
- Powered by battery being tested
|
|
Provides a quick and easy verification of battery condition for 12 Volt sealed lead acid (SLA), wet cells, gel cell and AGM batteries. Once the croc clip test leads are connected, battery capacity can be selected (between 5Ah and 80Ah) and a 20A te |
 |
X7015 |
|
- Two channel wireless
- Bluetooth range up to 50m
- Food grade stainless steel probes
- 0-300°C range (±1°C)
- Android & iOS app compatible
- Works in Ovens and BBQs
|
|
The EasyBBQ is a dual probe thermometer with Bluetooth connection to your smartphone. Includes 2 probes with stainless steel mesh cables. Android or iOS, plus monitoring on the backlit LCD. 0-300°C range. Requires 2xAAA batteries. |
 |
Q1133B NEW
|
|
- Streamlined design, comfortable handle
- Large LCD display makes reading clear
- Strong antimagnetic and anti-interferential performance
- Auto power off when there is no measurement in 15 minutes
- Full function protection
- Unit symbol display, easy to read
- CMOS, TTL logic test; True RMS, NCV, MAX/MIN tests
- Relative value measurement, frequency/ duty cycle test, data hold
|
|
Featuring large, easy to read 20mm digits, this quality mini auto ranging digital multimeter is ideal for mobile technicians, installers or enthusiasts who want excellent performance and functions at an affordable price. |
 |
Q1026A |
|
- Battery test range
- Continuity tester
- 10A DC current range
- Integral stand
- Fuse and diode protection
- Moving coil to measure extremely cyclic voltages
- Mirrored scale to minimise parallax error
- Resistance range zero adjustment
- Transistor hFE & LED tester
|
|
This quality analogue multimeter is ideal for observing constantly varying quantities such as cycling voltages or speaker resonance testing. It has 20kΩ/Volt sensitivity with a colour scale and mirrored arc for parallax error reduction. |
 |
Q1150B |
|
- High accuracy inductance & capacitance ranges
- Jumbo 1999 count readout
- Battery included
- Supplied with quality silicon rubber test leads, rubber holster.
|
|
This dedicated LC meter offers wider inductance and capacitance ranges than other "do-it-all" meters available on the market. |
 |
Q0107 |
|
|
|
12V car power adaptor. |
 |
X7100 NEW
|
|
- Jumbo clock digits - read up to 30m away!
- Calendar display.
- Day of the week display.
- Temperature & humidity display.
- Programmable alarm with snooze function.
|
|
This handy jumbo LCD 12/24 hour clock, thermometer and calendar is great for around the home or office. The extra large clock digits allow it to be read up to 30m away. The screen also provides date, day of the week, temperature and humidity readings. |
 |
Q1266 |
|
- Ranges: 40-130dB
- Resolution: ±0.1dB
- Freq. range: 31.5Hz - 8000Hz
- Freq. weighting: A
- Accuracy: ±3.5dB
- Microphone: Electret condenser
- Battery: 9V (included)
- Dimensions: 130H x 52W x 32D mm
|
|
Compact pocket sized SPL meter for general purpose sound level measurement. The wide 40 to 130dB range is ideal for occupational health and safety testing in venues, industrial environments, car audio and home theatres. Fast response time with min/max function. LCD backlight switches on automatically when working in dark areas. Includes threaded in |
 |
Q0176 |
|
- 10 x Position
- Attenuation Ratio: 10:1
- Bandwidth: DC - 100MHz
- Rise Time: 5.8ns
- Input Resistance: 10M Ohm when used with Oscilloscopes with 1M Ohm input
- Input Capacitance: Approx. 15pF
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- 1 x Position
- Attenuation Ratio: 1:1
- Bandwidth: DC - 15MHz
- Rise Time: 23.3ns
- Input Resistance: 1M Ohm (oscilliscope input)
- Input Capacitance: Approx. 46pF plus oscilliscope capacitance
- Compensation Range: 10 - 50pF
- Working Voltage: 600V DC
- Safety: IEC - 1010 CAT II
- Cable Length: 1.2 Metres
|
|
These high quality general purpose oscilloscope probes have x1 and x10 input attenuator and 600V maximum input voltage. 1.5m lead length. |
 |
T2261 |
|
- Zero/Tare function
- 4 unit counting modes
- 600 gram load capacity
- 0.01g resolution
- Measures in grams, avoirdupois ounces, troy ounces & pennyweight
- Auto power off
- Includes pleather pouch & hard plastic protective cover
|
|
These compact scales provide a quick and easy way of accurately weighing anything up to 600gm. Sized at just 120mm long, the unit fits right in your pocket. Housed in a protective plastic cover. |
