|
Description |
Downloads |
Specs |
Ordering |
|
|
D4400A NEW
|
|
- Perfect for boosting 4G & 5G signals on 4WDs, trucks and fleet vehicles.
- Deploy the unit anywhere in the network, with full frequency coverage
- Latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelized coverage for specific mobile network operator signals
- Support for 3G, 4G, and 5G dynamic spectrum sharing (DSS)
- Ease of installation with plug-and-play operation
|
|
The ideal product to boost and distribute a 3G/4G mobile signal within your 4WD or truck, boat or caravan. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. |
|
D4405 |
|
- Designed for mobile transport applications
- 70dB of system gain
- Each pack includes internal and external antennas
- Telstra network locked
- Carrier approved
- Band selection button
- Supports Telstra, Aldi Mobile, Boost Mobile and Woolworths Connect networks
- 12V DC powered
- SMA antenna connections
|
|
The ideal product to boost and distribute a 3G/4G mobile signal within your caravan. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. |
|
D4412 |
|
- Improves 3G and 4G coverage (5G future compatible)
- Simple management through WAVE mobile application
- 700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)
- 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
- Carrier Switching using WAVE App between Telstra, Optus or Vodafone
- Up to 3000 m2 coverage area
- Two band simultaneous relay
- Support for Dynamic Spectrum Sharing (DSS)
- Total System Relay Bandwidth – Up to 40 MHz
- Remote Monitoring, Control and Alert Capabilities via WAVE Portal
- Ethernet Port for connection to internet source for live monitoring
|
|
Cel-Fi Go G41 represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, the G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models. |
|
D4422 |
|
- 3 dBi gain across lower bands 698 to 960 MHz
- 3 dBi gain across upper bands 1710 to 2700 MHz
- Mounting by 3M adhesive
- SMA Male connector
- Cable length 3 meters
|
|
The Blackhawk 4G & IoT adhesive mount antenna is a modest performing mobile antenna that covers most worldwide 4G cellular bands between 700 and 2700 MHz. |
|
D4425 |
|
|
|
A compact bullbar mount antenna with spring base providing up to 6dBi gain for your Cel-Fi 4G system. Overall length: 68cm. 4m SMA connection cable. |
|
D4426 NEW
|
|
- Optimum 6 dBi gain for flat and hilly areas
- Extra heavy-duty stainless steel spring
- High-vibration PTL-240 Ultra-Flex cabling
- 4.5 metres of cable with an industry-standard SMA Male connector
|
|
Designed to provide optimal gain across 3G and 4G bands used when travelling throughout Australia & abroad. |
|
D4430 |
|
- Ruggedised fully welded construction for extreme conditions
- Powder coated finish
- Mounting clamp included
- 30cm pig tail terminated N Female
- Includes 10m LMR 240 Lead
- Perfect solution for voice and data applications where high gain antennas are required
- Ideal for fixed wireless terminals, mobile broadband Internet and smart repeater applications
|
|
A 14dBi 698-960MHz directional 4G antenna. For voice and data applications where high gain antennas are required. Fully welded & powder coated design for added outdoor durability. Overall length: 1.3m. 10m N Type connection cable. 5 year warranty. |
|
D4431 |
|
- 12 dBi gain across lower bands 698-960 MHz
- 14 dBi gain across bands 1710-2700 MHz
- 12 dBi gain across upper bands 3300-4000 MHz
- Ruggedised construction for Australian conditions
- Fully welded, powder coat aluminium design
- Stainless steel mounting clamp included
- 30 cm tail with pre-terminated N Female connector
- Ideal for high-speed 3G and 4G LTE applications
- Great for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G & 5G
|
|
The Blackhawk LPDA Antenna provides an ideal solution for 3G/ 4G voice and data applications. |
|
D4432 NEW
|
|
- 7 dBi gain across all mobile frequencies 698 to 960 MHz and 1710 to 2700 MHz
- White marine-grade fibreglass construction
- Short cable tail with a pre-fitted N Female connector Cable Sold Separately
- Operate with all mobile networks across Australia, New Zealand, and Internationally.
- Comes with an adjustable standard nylon mount
- Frequency: 698-2700MHz
- Dimensions: 70mm x 50mm x 1270mm
- Weight: 1kg
|
|
The Blackhawk Marine Antenna is designed to provide 4G connectivity in both close coastal and long range offshore boating. The antenna has the ideal 7 dBi gain that allows long range connectivity. |
|
D4437 |
|
- Frequency Range: 698-960 MHz / 1710-2600MHz
- VSWR: <1.5
- Input Impedance: 50Ω
- Gain: 7/8dBi
- Polarization Type: Line polarization
- E-Plane Beamwidth: 65°
- H-Plane Beamwidth: 90°
- F/B Ratio: ≤23dB
- Max Power: 50W
- Lightning Protection: DC ground
- Connector Type: "N Type" Female
- RG58/U Cable Length: 300mm
- Radome Material: UV-Resistant ABS
- Radome Colour: White
- Working Temperature: -40°C ~ +60°C
- Weight: 600g
- Dimensions: 210 x 180 x 44 mm
|
|
The Blackhawk Indoor Wall Mount Antenna is designed to operate with all mobile carriers in mind, regardless of what frequency they operate on. |
|
D4440 |
|
- Boosts 3G/4G/4GX Telstra Mobile Signals (one band at a time)
- Up to 100dB of system gain (each 3dB is a doubling of power)
- Approved for use on the Telstra Network
- Supports voice, internet and other mobile services
- Provides signal for 20+ Telstra Mobile Devices
- Locked to the Telstra Mobile Network
- Cel-Fi WAVE App available
- No sim card required
- Ideal for homes, offices, vehicles, caravans, trucks, boats and outdoor applications
|
|
This mobile repeater provides an extension of the Telstra Mobile network for in-car use in areas with marginal coverage. |
|
D4440A NEW
|
|
- Perfect for boosting 4G & 5G signals on 4WDs, trucks and fleet vehicles.
- Deploy the unit anywhere in the network, with full frequency coverage
- Latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelized coverage for specific mobile network operator signals
- Support for 3G, 4G, and 5G dynamic spectrum sharing (DSS)
- Ease of installation with plug-and-play operation
|
|
Unit only. External antenna sold separately. Stay connected wherever adventure takes you with the CEL-FI ROAM R41, a cutting-edge cellular signal booster designed to enhance your mobile experience. |
|
D4455A NEW
|
|
- Frequency covers 698-3800MHz
- High Isolation
- Suitable for indoor applications
- Widely used in IBS & DAS
|
|
Powertec RF Power Divider: 2-Way, 698-3800MHz, SMA Female with 22dB isolation. High frequency coverage, indoor application suitability, and superior isolation for optimal performance. |