|
Description |
Downloads |
Specs |
Ordering |
|
 |
D4231 |
|
- Supports auto-MDI/MDIX
- Supports TCP/IP server, TCP/IP Client & UDP
- Baud rate 300bps-230400bps
- Supports Modbus RTU
- Reload function
- RS485 support full duplex and half duplex
- Supports VSPE software.
|
|
This serial to ethernet converter allows you to easily send serial RS232/422/485/Modbus over ethernet for controlling equipment over longer distances than traditional serial cables. This device can be controlled and set up remotely using a handy web based interface. |
 |
D5106A ROHS
|
|
|
|
Cat6A approved network cable joiner. Straight through, pin to pin. |
 |
D4185 |
|
- Complies with IEEE802.3, IEEE802.3u standards
- 8 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
- Supports IEEE802.3x flow control for Full Duplex mode and backpressure for half-duplex mode
- Supports MAC address auto-learning and auto-aging
- LED indicators for monitoring power, link, activity
- Plastic case, desktop or wall-mounting design
- External Power Adapter supply
|
|
TL-SF1008D 8-port 10/100Mbps Fast Ethernet Switch provides 8 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. The Switch is Plug-and-Play and each port can be used |
 |
D5134A |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
 |
D4412 |
|
- Improves 3G and 4G coverage (5G future compatible)
- Simple management through WAVE mobile application
- 700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)
- 3G, 4G, VoLTE, NB-IoT (GO4 has 5G capabilities, but currently not enabled or approved)
- Carrier Switching using WAVE App between Telstra, Optus or Vodafone
- Up to 3000 m2 coverage area
- Two band simultaneous relay
- Support for Dynamic Spectrum Sharing (DSS)
- Total System Relay Bandwidth – Up to 40 MHz
- Remote Monitoring, Control and Alert Capabilities via WAVE Portal
- Ethernet Port for connection to internet source for live monitoring
|
|
Cel-Fi Go G41 represents the latest in 4G cellular repeater technology. Building on the success of the GO2 model, the G41 has a higher output power (+20 dBm), providing the largest coverage area of all GO models. |
 |
D4228 |
|
- 2 Gigabit ports ensure faster transmission
- Complies with IEEE802.3af/at standards, supplies up to 30 W
- Reduces infrastructure costs by transmitting data and power simultaneously via an Ethernet cable
- Automatically determines and supplies the exact power to meet the device's need
- Wall-mounting and desktop design accommodates most installation scenarios
- Plug & Play installation requires no configuration
- Integrated power supply
|
|
Expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. |
 |
D4212 |
|
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 53W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 8K entry MAC address table of the TL-SG1008P with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power supply adapter
|
|
8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch |
 |
D4230 |
|
- *TP-LINKs TL-POE10R uses widely adopted PoE technology in the industry and provides more cost-effective PoE solution. It is highly recommended not to pair the PoE products with other PoE adapters unless under professional guidance.
|
|
The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter. |
 |
D4232 |
|
- Range Extender mode boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly
- Miniature size and wall-mounted design make it easy to deploy and move flexibly
- Easily expand wireless coverage at a push of Range Extender button
- Smart Signal Indicator Light help to find the right location to place the range extender
- Ethernet port allows the Extender to function as a wireless adapter to connect wired devices
- 300Mbps wireless data rates ideal for video streaming, online gaming and internet calling
- Supports domain name-based login (https://tplinkextender.net) for advanced management
- Compatible with other 802.11n/g/b wireless devices
- Advanced 64/128/152-bit WEP, WPA-PSK / WPA2-PSK encryptions protect your network from security threats
|
|
The D 4232 is designed to conveniently expand the coverage and improve the signal strength of an existing wireless network to eliminate "dead zones". |
 |
D4229 |
|
- *TP-LINKs TL-POE150S uses widely adopted PoE technology in the industry and provides more cost-effective PoE solution. It is highly recommended not to pair the PoE products with other PoE adapters unless under professional guidance.
|
|
The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters or other equivalent products, to extend your network to where there are no power line or |
 |
S9266 |
|
|
|
Allows you to power non PoE equipped devices
from a 802.3af Power Over Ethernet RJ45 cable.
Eliminates the need for a power supply at the
camera end of the cable run. 12V, 15.4W max. |
 |
D4213A |
|
- 8 10/100/1000Mbps RJ45 ports
- Equipped with 8 PoE+ ports to power 8 PoE devices at the same time
- Works with IEEE 802.3af or 802.3at compliant up to 30W per port device
- Innovative energy-efficient technology reduces power consumption
- Rack mountable with included rack mount bracket
- Total PoE power budget up to 126W
- Plug and play design, no configuration required
|
|
8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
|
 |
D4196 |
|
- All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps
- Supports Auto-MDI/MDIX function
- Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode
- Store and forward Switching scheme
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch allows multiple computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. Rack mountable. |
 |
D4191 |
|
- Adopts Green Ethernet technology, saving power and cost
- Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode
- Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
- Supports MAC address auto-learning and auto-aging
- Plastic case, desktop or wall-mounting design
- External power adapter supply
|
|
This high speed TP-Link 10/100/1000Mbps ethernet switch will allows up to 5 computers to be connected together. Further computers may be added by daisy-chaining more switches together. Plugpack included. |
 |
D5113A |
|
|
|
Keystone wallplates, ideal for telephone and computer use. Wall plates include connectors.
Size: 70W x 115H. |
 |
D4249 |
|
- Superior Range – High power amplifiers and high-gain antennas provide enhanced wireless range up to 10,000 sq ft.
- Wall-Penetrating Wi-Fi – Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones
- 3 Modes Functionality – Offers three wireless modes, including Router, Range Extender, and Access Point
- 450Mbps Wireless Speed – Ideal for video streaming, online gaming and VoIP
|
|
Superior Range &ndash High power amplifiers and high-gain antennas provide enhanced wireless range up to 10,000 sq ft.
Wall-Penetrating Wi-Fi - Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones
3 Modes Functionality - Offers three wireless modes, including Router, Range Extender, and Access Point
450Mbps Wi |
 |
D4405 |
|
- Designed for mobile transport applications
- 70dB of system gain
- Each pack includes internal and external antennas
- Telstra network locked
- Carrier approved
- Band selection button
- Supports Telstra, Aldi Mobile, Boost Mobile and Woolworths Connect networks
- 12V DC powered
- SMA antenna connections
|
|
The ideal product to boost and distribute a 3G/4G mobile signal within your caravan. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. |
 |
D4206 |
|
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 110W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 8K entry MAC address table of the TL-SG1016PE with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
|
|
16-Port Gigabit Desktop Switch with 8-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities.
|
 |
D4299 |
|
- Boosts your wireless signal, eliminating previously inaccessible areas or “dead zones”
- Supports all 802.11 a/b/g/n/ac standards of Wi-Fi routers and wireless access points
- Wireless AC technology delivers combined dual band speeds of up to 750Mbps
- Gigabit Ethernet port allows the extender to connect to wired devices as a wireless bridge
- Its compact, wall-mounted design allows for easy, flexible deployment
|
|
This wifi extender is designed to conveniently expand the coverage and improve the signal strength of an existing wireless network to eliminate 'dead zones'. With 750Mbps wireless N speeds, 'Range Extender' button, tiny size and wall mounting design, extending a wireless network has never been simpler. |
 |
S9747 |
|
- Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralised Cloud Management, and Intelligent Monitoring.
- Centralised Management: Cloud access and Omada app for ultra convenience and easy management.
- Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.
- PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter included) for flexible installations.
- Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies.
- Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies.
|
|
As a long range indoor wireless device, the EAP225 is designed to provide a multiple connection and long distance wireless networking solution. It operates seamlessly in the 2.4GHz and 5GHz frequency spectra and provides wireless data transfer rates of up to 1200Mb |
 |
D5137A |
|
- Electrical Specifications
- Voltage Rating: 125V AC RMS
- Current Rating: 1.5A
- Contact Resistance: 100milliohms (max)
- Insulation Resistance: 1000megohms (min @ 500V DC)
- Dielectric Strength: 750V AC RMS @ 60Hz for 1 minute
- Environmental Specifications
- Storage Temperature: -40°C ~ +85°C
- Operating Temperature: 0°C ~ +70°C
- Mechanical Specifications
- Housing Material: PC
- Panel Frame: Carbon steel, black powder coated
- PCB Material: FR-4 T=1.6mm
- IDC Material: PC
- Contact: Phosphor bronze with nickel plating
- RJ45 Jack Life: 750 times (min)
- IDC Life: 200 times (min)
- Wire Gauge: 22-26AWG
|
|
This 1RU panel is fitted with 24 RJ45 "back to back" coupler ports for tool free cable termination. Port numbers fields can be written on and fitted securely behind a clear lexan. Black finish. Includes rear cable support bar with earthing strap. |
 |
S9740 |
|
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
|
|
TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. |
 |
D4422 |
|
- 3 dBi gain across lower bands 698 to 960 MHz
- 3 dBi gain across upper bands 1710 to 2700 MHz
- Mounting by 3M adhesive
- SMA Male connector
- Cable length 3 meters
|
|
The Blackhawk 4G & IoT adhesive mount antenna is a modest performing mobile antenna that covers most worldwide 4G cellular bands between 700 and 2700 MHz. |
 |
S9722A |
|
- Gain: +5 dB
- Connector: SMA Male
- Operating frequency: 2.4Ghz
- Impedance: 50Ω
- Dimensions (mm): 12.5 x 195
- Weight: 30g
|
|
5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection. |
 |
D5135 |
|
|
|
This 1RU panel is fitted with 24 RJ45 Keystone jack ports and features numbered outlets for easy identification. Black finish. Includes rear cable support bar. |
