|
Description |
Downloads |
Specs |
Ordering |
|
 |
SW1047 NEW
|
|
- Rating: 30A 12V DC, 20A 125V AC, 15A 250V AC
- Panel Cut-Out Size: 12mm
- Waterpoof Degree: IP67
- Function: ON-OFF DPST (Alternate)
- Terminal: 6mm spade
- Contact Resistance: ≤25mΩ
- Insulated Resistance: 100 mΩ min.at 500VDC
- Operating Temperature: -25°C to +85°C
- Electrical Life: ≥50,000 Cycles
|
|
This 30A 12V DC / 15A 250V AC toggle switch offers IP67 water and dust protection for industrial applications. DPST |
 |
SW1042 NEW
|
|
- Rating: 30A 12V DC, 20A 125V AC, 15A 250V AC
- Panel Cut-Out Size: 12mm
- Waterpoof Degree: IP67
- Function: ON-OFF SPST (Alternate)
- Terminal: 6mm spade
- Contact Resistance: ≤25mΩ
- Insulated Resistance: 100 mΩ min.at 500VDC
- Operating Temperature: -25°C to +85°C
- Electrical Life: ≥50,000 Cycles
|
|
This 30A 12V DC / 15A 250V AC toggle switch offers IP67 water and dust protection for industrial applications. |
 |
S1037 ROHS
|
|
|
|
A missile switch cover for toggle switches. Prevents accidental activation. Great for race cars. Cover turns switch off when snapped down.
Carbon fibre look. To suit S1040/42/50/52 switches. |
 |
S1053 ROHS
|
|
- Contact Rating: 10A @ 220V AC
- Mounting Hole Diameter: 12mm
- Switch Type: Momentary On (Both Positions)
|
|
With On-Off-On plate and metal actuator.
Water Proof Cover to suit (S 1035) |
 |
S1049 |
|
- Plate: None
- Contact rating: 10A @ 250V AC
- Actuator: Metal
- Contact resistance: 50mΩ max.
- Insulation resistance: >1000MΩ
- Dielectric strength: >1500V AC 1 minute
|
|
Momentary On-Off switch
Water Proof Cover to suit (S 1035) |
 |
S1385 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-mThe Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom |
 |
S1348 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
Includes an actuator that cannot be operated accidentally. To switch on or off the actuator must be pulled out before switching can take place.
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other lea |
 |
S1036 ROHS
|
|
|
|
Turn a regular toggle into a missile launch style switch.
Prevents accidental activation. Cover turns switch off when snapped down. Suits S 1040, S 1042, S 1050 and S 1052. |
 |
S1052 ROHS
|
|
- Contact Rating: 10A @ 220V AC
- Mounting Hole Diameter: 12mm
|
|
With On-Off plate and metal actuator.
Water Proof Cover to suit (S 1035) |
 |
S1054 |
|
- Switch Type: DPDT Centre Off
- Contact Rating: 6A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
DPDT switch with On-Off-Mom On plate. Locks on in both directions. With metal actuator. |
 |
S1047 |
|
- Plate: On-Off
- Contact rating: 10A @ 250V AC
- Actuator: Metal
- Contact resistance: 50mΩ max.
- Insulation resistance: >1000MΩ
- Dielectric strength: >1500V AC 1 minute
|
|
With On-Off plate and metal actuator.
Water Proof Cover to suit (S 1035) |
 |
S1055 |
|
- Switch Type: DPDT Centre Off
- Contact Rating: 6A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
DPDT switch with On-Off-On plate. Locks on in both directions.
With metal actuator. |
 |
S1010 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 30A@12VDC
- Mounting Hole Diameter: 12mm
- Actuator: Plastic (with inbuilt LED)
|
|
SPST switch with red LED built into toggle handle. |
 |
S1044 ROHS
|
|
- A heavy duty toggle switch featuring alternate action in both directions. 10A @ 250V AC rated for automotive and industrial applications.
|
|
Switch Type: SPDT
Contact Rating: 10A@250VAC
Mounting Hole Diameter: 12mm
Actuator: Metal |
|
S1046 ROHS
|
|
- Switch Type: SPDT
- Contact Rating: 10A@250VAC
- Mounting Hole Diameter: 12mm
- Actuator: Metal
|
|
Switch Type: SPDT
Contact Rating: 10A@250VAC
Mounting Hole Diameter: 12mm
Actuator: Metal |
 |
S1043 |
|
- Action: Momentary On - Off - Momentary On.
- Plate: On-Off-On
- Contact rating: 10A @ 250V AC
- Mounting hole diameter: 12mm
- Actuator: Metal
- Contact resistance: 50mΩ max.
- Insulation resistance: >1000MΩ
- Dielectric strength: >1500V AC 1 minute
|
|
Plate: On-Off-On
Contact rating: 10A @ 250V AC
Mounting hole diameter: 12mm
Actuator: Metal
Contact resistance: 50mΩ max.
Insulation resistance: >1000MΩ
Dielectric strength: >1500V AC 1 minute |
 |
S1380 |
|
- Contact Resistance: 10mΩ max
- Insulation Resistance: 1,000M Ω min
- Dielectric Strength: 1500V a.c. 50/60Hz
- Soldering Temperature: 260°C
- Duration of Solder Immersion: 5 ± 1
- Resistance Low Temperature: -30 ± 3°C
- Resistance High Temperature: 85 ± 3°C
- Resistance Humidity Temperature: 40 ± 2°C
- Relative Humidity: 90-95%
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. |
 |
S1311 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
Includes an actuator that cannot be operated accidentally. To switch on or off the actuator must be pulled out before switching can take place.
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other lea |
 |
S1042 ROHS
|
|
- Switch type: SPST
- Contact rating:10A @ 250V AC
- Mounting hole diameter: 12mm
|
|
With On-Off plate and metal actuator. |
 |
S1346 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Thread OD: 11.45mm
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1355 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1365 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1375 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1370 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1250 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
